DOWNLOAD Sharp AR-285 (serv.man35) Service Manual ↓ Size: 1.49 MB | Pages: 58 in PDF or view online for FREE

●

Push once on the door to unlatch and open it.

●

Toner cannot be reused. Do not transfer used toner to the toner
hopper.

●

Remove the cap from a new toner collecting container and use
it to cover the full toner collecting container.

●

Keep the full toner collecting container until the next regular
service call. Your authorised Sharp Service Technician will
collect the container for disposal.

“

”

will appear when the toner collecting container is full.
The copier will stop and will not operate until a new container has been
installed. Replace the toner collecting container as described below.
When the above message is displayed, you can use the INFORMATION
(

) key for detailed information as necessary.

 Used toner disposal

Storage of supplies

The supplies of this copier replaced by the user include copy  paper,
toner, toner collecting container, and staple cartridges for an optional
finisher (AR-FN1).

For best copying results, be sure to use
only Sharp products. The package of
Sharp toner has the Genuine Supplies
label.

The AR-280/AR-285/AR-335 Copiers have advanced process control
technology which improves copy quality uniformity. This feature
stabilizes copy quality throughout the life of the photoconductive
drum by automatically compensating for the changes in drum
characteristics due to wear, operator use patterns, and environmental
conditions. The automatic adjustments are made in response to a
sensor that detects the reflectance characteristics of the drum.

This feature requires drums containing the special reflectance area
(recommended Sharp genuine photoconductive drum), to prevent
low image density copies from poor process control and possible
damage to the machine. If you use other drums, the process control
system cannot run properly.

●

clean and dry,

●

at a stable temperature,

●

not exposed to direct sunlight.

●

Paper stored in packages standing up or out of the wrapper may
curl or become damp, resulting in paper misfeeds.

                                    

  

Page

●

5-2

●

5-12

●

5-13

This chapter describes how to remove misfed
originals and paper and other common trouble
remedies.

(    P. 5-2, 5-3)

(    P. 5-4)

(    P. 5-4)

(    P. 5-6)

(    P. 5-7)

(    P. 5-9)

When a misfeed occurs, the copier will stop.
The message “

” will appear with a display of paper

misfeed locations. Press the INFORMATION (

) key

for more detailed information as necessary.

If paper becomes accidentally torn during removal, be
sure to remove all pieces. Be careful not to damage the
photoconductive drum or the corona wires.

  Misfeed removal

When the SPF misfeeds an original sheet, the copier will stop and the
misfeed message will appear.

A