DOWNLOAD Sharp AR-285 (serv.man35) Service Manual ↓ Size: 1.49 MB | Pages: 58 in PDF or view online for FREE

●

Slide the paper size indicator to the right or left to match the
paper size.

●

Slide the front and left guides to match the width and length of
the copy paper.

●

The paper size card has three faces. Fold the card properly to
show the selected paper size. The paper size indication which
shows through the slot on the front of the copier should match
the selected paper size.

  Paper

Paper size indicator

Front guide

Left guide

Maximum height line

Paper size 
card

8  

x11

216x279

216x330

8  

x13

B5

A4

A3

A5

B5

B4

The message “

” will appear in the message display before the toner

supply is completely empty. If copying is continued, copies will
gradually become lighter until the copier stops and the message
display changes to “

”

indicating that the toner supply is empty. Toner can be added any time
after the message “

” appears. To add toner, stop the copier and proceed as

below. When either  message appears, you can use the INFORMATION
(

) key for detailed information as necessary.

During long copy runs of multiple originals containing many images
and/or dark shades, “

” will

appear and the copier will stop making copies even though toner is
left.
The copier will automatically cycle and replenish the toner to the
normal level and then the START (

) key indicator will light up. Press

the START (

) key to resume copying.

  Adding toner

For best copying results, be sure to use
only Sharp products. The package of
Sharp toner has the Genuine Supplies
label.

20 x

5 x

●

If the toner cartridge was sufficiently shaken as described in
step 3, it will take about 50 seconds for the cartridge to empty.
Do not remove the cartridge until it is empty. If not empty, tap on
the top of the cartridge again until empty.

●

The cartridge opening will be closed as it is moved back along
the guides.

NOTE:
Add only one cartridge of toner.

  Adding toner

Sealing tape

●

Push once on the door to unlatch and open it.

●

Toner cannot be reused. Do not transfer used toner to the toner
hopper.

●

Remove the cap from a new toner collecting container and use
it to cover the full toner collecting container.

●

Keep the full toner collecting container until the next regular
service call. Your authorised Sharp Service Technician will
collect the container for disposal.

“

”

will appear when the toner collecting container is full.
The copier will stop and will not operate until a new container has been
installed. Replace the toner collecting container as described below.
When the above message is displayed, you can use the INFORMATION
(

) key for detailed information as necessary.

 Used toner disposal