DOWNLOAD Sharp AR-285 (serv.man34) Service Manual ↓ Size: 1.68 MB | Pages: 78 in PDF or view online for FREE

Model
AR-285 (serv.man34)
Pages
78
Size
1.68 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / AR280 285 335 Operation Manual-Section 1
File
ar-285-sm34.pdf
Date

Sharp AR-285 (serv.man34) User Manual / Operation Manual ▷ View online

2-17
CHAPTER
2
MAKING COPIES  
Sort/group
1
2
3
3
2
1
3
2
1
3
2
1
1
2
3
3
3
2
3
2
1
1
1
2
SORT/GROUP
When the SORT (
) icon is indicated on the touch panel, copies
will be collated by sets and then delivered to the exit tray.
When the SORT (
) icon is not indicated, copies will be grouped
by originals.
When the SPF/RADF is used for copying, copies will be collated
in the default setting. To copy in the GROUP mode, press the
OUTPUT key and then select the GROUP mode on the touch
panel. When the GROUP mode is selected, the GROUP (
)
icon is indicated on the touch panel.
When the document glass is used for copying, copies will be
grouped. To copy in the SORT mode, press the OUTPUT key and
then select the SORT mode on the touch panel.
SORT mode
Each set of copies will be sequentially delivered to the exit
tray.
GROUP mode
All copies of the same original will be grouped in the exit
tray.
2-18
CHAPTER
2
 JOB MEMORY
Frequently used job programs can be stored in one of nine storage
registers. This is convenient for quick job recall without losing time
manually reprogramming each aspect of the job.
All functions that can be set in the copy mode except the copy
quantity setting can be stored in the job memory.
If any function which has been stored in a job program is modified
by a key operator program, the key operator settings will supercede
the previous setting.
★ KEY OPERATOR
Job memory replacement/deletion can be
prohibited. See page 8-24.
Storing a job program
1
Press the PROGRAM (
P
) key.
The JOB PROGRAMS screen will appear on the touch panel.
2
Press the “STORE/DELETE” key on the touch panel.
To cancel the job memory mode, press the “EXIT” key or the
CLEAR ALL (
CA
) key.
3
Select a program number from 1 to 9 on the touch panel.
The numbers which are highlighted are program numbers which
have been used.
If a program number which has been used is entered, a
message will appear to confirm the selection. To replace with
the new program, press the “STORE” key and proceed to the
next step.
To cancel replacement, press the “CANCEL” key.
4
Make all copier selections to be stored.
5
Press the “OK” key to complete the storage.
MAKING COPIES 
 Job memory
8
9
0
C
CLEAR
PROGRAM
LEAR
P
STORE/DELETE
RECALL
JOB PROGRAMS
STORE/DELETE
RECALL
PRESS PROGRAM NUMBER.
EXIT
MAKE COPIER SELECTIONS AND PRESS
[OK].
OK
CANCEL
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
1. A4
2. A3
2-19
CHAPTER
2
JOB PROGRAMS
STORE/DELETE
RECALL
PRESS PROGRAM NUMBER.
EXIT
MAKING COPIES 
 Job memory
Deleting a stored job program
1
Follow steps 1 and 2 in “Storing a job program” on the
previous page. (1. Press the PROGRAM (
P
) key.
2. Press the “STORE/DELETE” key.)
2
Select the storage register number of the program to be
deleted.
Be sure to select a number which contains a stored program. If
not, “Storing a job program” operation will start.
3
Press the “DELETE” key.
The program will be deleted from memory.
To cancel deletion, press the “CANCEL” key.
4
Press the “EXIT” key to exit the job memory mode.
Recalling a job program
1
Press the PROGRAM (
P
) key.
The JOB PROGRAMS screen will appear on the touch panel.
The numbers which are indicated are program numbers which
contain stored programs.
2
Select a stored program from 1 to 9 on the touch panel.
All selections stored in the program will appear on the touch
panel.
The recalled settings may be modified for a particular job run,
but any changes made will not be stored in the job memory. To
store the new settings, follow the “Storing a job program”
procedure.
JOB MEMORY
JOB PROGRAMS
STORE/DELETE
RECALL
PRESS PROGRAM NUMBER.
EXIT
8
9
0
C
CLEAR
PROGRAM
LEAR
P
JOB PROGRAMS
A JOB PROGRAM HAS BEEN ALREADY STORED.
STORE ANOTHER PROGRAM?
CANCEL
DELETE
STORE
STORE/DELETE
RECALL
PRESS PROGRAM NUMBER.
JOB PROGRAMS
STORE/DELETE
RECALL
PRESS PROGRAM NUMBER.
EXIT
2-20
CHAPTER
2
1
Press the INTERRUPT (
) key.
When the document feeder is being used, the copier will stop
after completing the copying of the originals which have been
fed into the document feeder. The INTERRUPT indicator will
blink until the copier becomes ready for interrupt copying.
Then the INTERRUPT indicator will light up.
The copier will return to the initial setting.
If the copier has been programmed in the auditing mode, the
account number entry message will appear. Enter your account
number using the 10-key pad. The number of copies of the
interrupt copying will be accumulated against this account
number.
2
When the copier stops, remove the original(s) and set
the original(s) for interrupt copying in the document
feeder tray or on the document glass.
The maximum number of originals for interrupt copying is
restricted.
1-sided originals: 20 sheets (10 sheets for B4 and A3 (8-1/2" x
14" and 11" x 17"))
2-sided originals: 10 sheets (5 sheets for B4 and A3 (8-1/2" x
14" and 11" x 17"))
3
Select the desired available copier functions.
4
Press the START (
) key.
The interrupt copies will be delivered to the second tray.
5
When the interrupt copy run is complete, press the
INTERRUPT (
) key again to cancel the mode and
remove the original(s) used for interrupt copying.
The copier will reset itself to the functions which were in use
before the INTERRUPT (
) key was first pressed.
6
Replace the original(s) for the interrupted job and press
the START (
) key to resume copying.
If scanning of originals has been already complete, the original
need not be replaced.
MAKING COPIES 
 Interrupting a copy run
INTERRUPTING A COPY RUN
INTERRUPT can be used to temporarily stop a long copy run so that
another job can be run.
INTERRUPT will not function during duplex copying.
Duplex copying cannot be selected during interrupt copying.
 KEY OPERATOR
If  the second tray is not installed, output of
copies to the second tray must be disabled. See page 8-26.
3
6
INTERRUPT
CA
CLE
C
CLEAR
INTERRUPT
CA
CLEAR ALL
START
3
6
INTERRUPT
CA
CLE
Page of 78
Display

Click on the first or last page to see other AR-285 (serv.man34) service manuals if exist.