Sharp AR-285 (serv.man34) User Manual / Operation Manual ▷ View online
2-7
CHAPTER
2
1-sided copies from 2-sided originals
This mode cannot be used in the AR-280 because the RADF is needed
in this mode.
in this mode.
1
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
set the originals face up in the document feeder tray.
2
Press the 2-SIDED COPY key.
3
Press the
key on the touch panel.
4
Press the “OK” key.
5
Enter the desired number of copies.
6
Press the START (
) key.
●
To cancel a copy run, press the CLEAR ALL (
CA
) key. Copying
will stop and the RADF will output any originals which have been
fed. Also, the number in the copy quantity display will be reset
to 0.
fed. Also, the number in the copy quantity display will be reset
to 0.
MAKING COPIES
Using the SPF/RADF
USING THE SPF/RADF
AUTO
Maximum height
line
line
1
2
3
4
5
6
7
8
9
0
P
PROGRAM
AUDIT CLEAR
INT
CA
CLEAR ALL
START
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
2-8
CHAPTER
2
COPYING FROM THE DOCUMENT GLASS
1-sided copies of 1-sided originals
1
Open the document feeder cover and place an original
face down on the document glass, using the centring
scale to position it.
face down on the document glass, using the centring
scale to position it.
●
When copying multi-page documents, copy from the last page
to the first page.
to the first page.
NOTE:
Do not place objects under the original size detector, because they
may damage it.
Do not place objects under the original size detector, because they
may damage it.
2
Close the document feeder cover.
●
The original size will be indicated on the touch panel, and the paper
tray with the corresponding paper size will be automatically
selected.
tray with the corresponding paper size will be automatically
selected.
3
Ensure that the 1-sided to 1-sided copying mode is
selected on the touch panel.
selected on the touch panel.
●
When no icon is displayed in the area indicated in the illustration
(
(
), the 1-sided to 1-sided copying mode is selected.
●
If the 1-sided to 1-sided mode is not selected, press the
2-SIDED COPY key and then press the 1-sided to 1-sided key
(
2-SIDED COPY key and then press the 1-sided to 1-sided key
(
) on the touch panel. Press the “OK” key to return to the
basic screen.
4
Use the 10-key pad to enter the desired number of
copies.
copies.
●
The number will be shown in the copy quantity display of the
touch panel.
touch panel.
●
A single copy can be made with the initial setting, i.e., when “0”
is displayed.
is displayed.
●
Use the CLEAR (
C
) key to cancel an entry if a mistake is made.
●
If you set a multiple number of copies, the copies will not be
delivered collated in the default setting. To deliver in the SORT
mode, press the OUTPUT key and then select the SORT mode
on the touch panel. See page 2-17.
delivered collated in the default setting. To deliver in the SORT
mode, press the OUTPUT key and then select the SORT mode
on the touch panel. See page 2-17.
MAKING COPIES
Copying from the document glass
Use the document glass for copying single originals,
bound documents, and other originals that cannot be
set in the SPF/RADF.
bound documents, and other originals that cannot be
set in the SPF/RADF.
●
Only 1-sided to 1-sided and 1-sided to 2-sided
copying can be selected when copying from the
document glass.
copying can be selected when copying from the
document glass.
●
Duplex copying will not work when a non-standard
sized paper (or 5-1/2" x 8-1/2" paper) is used.
sized paper (or 5-1/2" x 8-1/2" paper) is used.
●
2-sided to 2-sided or 2-sided to 1-sided copying
cannot be selected when copying from the
document glass. These operations can, however,
be performed simply by turning over the original
manually.
cannot be selected when copying from the
document glass. These operations can, however,
be performed simply by turning over the original
manually.
●
If the orientation of the original does not match that
of the copy paper when both the original and copy
paper are of standard sizes and the auto paper
select mode or automatic copy ratio select mode is
on, the image of the original will be automatically
rotated to match the copy paper. However, if
enlargement copying onto a paper size larger than
A4(8-1/2" x 11") is performed, the image will not be
rotated.
of the copy paper when both the original and copy
paper are of standard sizes and the auto paper
select mode or automatic copy ratio select mode is
on, the image of the original will be automatically
rotated to match the copy paper. However, if
enlargement copying onto a paper size larger than
A4(8-1/2" x 11") is performed, the image will not be
rotated.
●
Image void (max. 5 mm (13/64")) can occur along
the leading and trailing edges of the copies. Also
image void (max. 5 mm (13/64") in total) can occur
along the other edges of the copies.
the leading and trailing edges of the copies. Also
image void (max. 5 mm (13/64") in total) can occur
along the other edges of the copies.
READY TO COPY.
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
1. A4
2. A3
A4
ORIGINAL
1
2
3
4
5
6
7
8
9
0
C
P
CLEAR
PROGRAM
AUDIT CLEAR
INTERRUPT
Original size detector
Centring scale
2-9
CHAPTER
2
MAKING COPIES
Copying from the document glass
COPYING FROM THE DOCUMENT GLASS
5
Press the START (
) key.
●
If the copier is in the GROUP mode (the sort icon is not displayed
on the touch panel), copying will start and the number in the copy
quantity display will decrease by 1 each time a copy is made. To
repeat the same copy sequence with a different original, simply
replace the original and press the START (
on the touch panel), copying will start and the number in the copy
quantity display will decrease by 1 each time a copy is made. To
repeat the same copy sequence with a different original, simply
replace the original and press the START (
) key.
●
If the copier is in the SORT mode, the original will be scanned
when the START (
when the START (
) key is pressed but copying will not begin.
Proceed to step 6.
●
To cancel a copy run, press the CLEAR ALL (
CA
) key. Copying
will stop and the number in the copy quantity display will be reset
to 0.
to 0.
6
Remove the first original with the next original after the
START (
START (
) key indicator lights up, and then press the
START (
) key. Repeat this step until all the originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
on the touch panel.
●
Copying will start after the “READ-END” key is pressed.
●
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
of originals larger than A4 (8-1/2" x 11") can be scanned.
2-sided copies from 1-sided originals
To copy in the 1-sided to 2-sided copy mode with the AR-280, an
optional duplex module (AR-DU1) must be installed.
optional duplex module (AR-DU1) must be installed.
1
Set the last page of the document onto the document
glass, using the centring scale to position it.
glass, using the centring scale to position it.
NOTE:
Do not place objects under the original size detector, because they
may damage it.
Do not place objects under the original size detector, because they
may damage it.
2
Close the document feeder cover.
●
The original size will be indicated on the touch panel, and the paper
tray with the corresponding paper size will be automatically
selected.
tray with the corresponding paper size will be automatically
selected.
3
Press the 2-SIDED COPY key.
C
CLEAR
INTERRUPT
CA
CLEAR ALL
START
AUTO
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
WHEN FINISHED, PRESS [READ-END].
AUTO A4
3
Original size detector
Centring scale
2-10
CHAPTER
2
4
Press the
key on the touch panel.
5
Press the “OK” key.
6
Use the 10-key pad to enter the desired number of
copies.
copies.
●
The number will be shown in the copy quantity display.
●
Use the CLEAR (
C
) key to cancel an entry if a mistake is made.
7
Press the START (
) key.
●
The original will be scanned each time the START (
) key is
pressed, but copying will not begin yet.
8
Remove the first original and replace it with the next
original after the START (
original after the START (
) key indicator lights up, and
then press the START (
) key.
●
Copy from the last page to the first page.
9
Repeat step 8 until all originals have been scanned.
Then, press the “READ-END” key on the touch panel.
Then, press the “READ-END” key on the touch panel.
●
Copying will start after the “READ-END” key is pressed.
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
●
To cancel a copy run, press the CLEAR ALL (
CA
) key.
MAKING COPIES
Copying from the document glass
COPYING FROM THE DOCUMENT GLASS
1
2
3
4
5
6
7
8
9
0
P
PROGRAM
AUDIT CLEAR
INT
CA
CLEAR ALL
START
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
WHEN FINISHED, PRESS [READ-END].
AUTO A4
3
READY TO COPY.
2-SIDED COPY
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
READY TO COPY.
2-SIDED COPY
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
OK
AUTO A4
Click on the first or last page to see other AR-285 (serv.man34) service manuals if exist.