DOWNLOAD Sharp AR-285 (serv.man2) Service Manual ↓ Size: 207.88 KB | Pages: 52 in PDF or view online for FREE

 

 

 

 

• 

Corrected blank copy problem in duplex mode. 

• 

To prevent HDD trouble (E7-03). 

• 

Optional ARFN2 installation. 

• 

Corrected H4 trouble (FWS disturbed by noise) 

• 

Added function that displays processing speed while editing 
images. 

• 

Improved registration accuracy when “Middle Binding” & 
“AMS” functions are selected. 

• 

Changed the method of controlling paper transport when A3 
paper is fed out of the ADU. 

• 

Set Sim26-01 to 1 only when destination is set SUK/SEEG 

• 

Corrected center edge erase deviation problem when Hi-Fi & 
Edge Erase modes are both selected. 

• 

Prevents images of tiny dust like substances from being 
printed on the leading edge. 

• 

Corrected incomplete copy (blank 2nd side) during pamphlet 
mode copying. 

• 

Corrected the spelling of “October” when using the text 
stamp function. 

• 

Upgraded due to the launch of the AR-PB2 

• 

Added Sim 26-46 

• 

Corrected “Hang-Up” problem while printing 2040 sheets 
from Word97 using Mail Merge. 

• 

To correct the Main Motor operation (keeps rotating). 

• 

Added Sim26-40 which allows the time duration of the 
polygon motor after completion of a copy run. 

• 

E7-00 trouble when printing mixed data in duplex, insert 
cover sheet, by-pass tray modes. 

• 

To correct booklet A4 on A3 

• 

Corrects the problem with the LCC counter value contained 
in the data printed by Sim 22-06 not printing correctly. 

• 

To correct black streaks that appear on the edge of the first 
copy after the power is turned on. 

 

 

 

• 

Production start. 

• 

Changed firmware with the release of the AR250. 

• 

Corrected the problem with the mechanical count & multi 
count do not match. 

• 

Corrected the image shift problem in pamphlet mode. 

• 

Added Sim26-40 which allows the time duration of the 
polygon motor after completion of a copy run. 

• 

Corrected the printing order of date if different from what is 
designated. 

• 

Corrected black lines when using A3 original/OC mode/ 
AMS/Duplex copy/Pamphlet copy left binding are used 
together. 

• 

Corrected spelling in Jam guidance. 

• 

Corrected stretched copy image when using “Binding 
change” & “Pamphlet copy right binding”. 

• 

Corrected the problem that a paper jam can occur when a 
document containing A3 & A5 size is printed in the duplex 
mode. 

• 

Improved image positioning for booklet mode printout. 

• 

Printer configuration page not showing the correct printer 
model(s). 

• 

Production start. 

 

 

 

  

• 

When using printer function, the data on/after page 83 is 
printed. 

• 

Prints Test Pattern 30 in Sim64-01. 

• 

Method of creating a patch on the drum during process 
control is changed. 

• 

“Factory setting” allows paper to be delivered to the Top Tray 
with an AR-FN1N. 

• 

Axis scanner is supported. 

• 

The time of image processing is shortened when using the 
“Edit” function. 

• 

When using Operation guide key, the explanations are 
indicated in reverse order on LCD. 

• 

To correct main motor operation (keeps cycling) when using 
Cover page insertion/Copy enlargement at 129%/Binding 
margin & 2 position stapling (ARFN1N). 

• 

Corrected maintenance cycle settings using Sim21-01. 

• 

When comparing the sum of the internal copier auditor 
counter reading & the valid copy counter reading, the auditor 
counter reading is larger. 

• 

The misspelling in Sim48-01 & Key Op’s program is 
corrected. 

• 

Priority message for “Maintenance Required” indicated on 
LCD is changed. 

• 

The wordings “Select Stamp & “Watermark” are changed. 

• 

Added Sim 26-46. 

• 

Corrected image shift problem using Pamphlet Mode. 

• 

Added Sim26-40 which allows the time duration of the 
polygon motor after completion of a copy run. 

• 

Changed procedure for clearing “POD” jam. 

• 

Corrected stretched copy image when using “Binding change” 
& “Pamphlet copy right binding”. 

• 

Corrected the printing order of date if different from what is 
designated. 

• 

Corrected black lines when using A3 original/OC mode/ 
AMS/Duplex copy/Pamphlet copy left binding are used 
together 

• 

Corrected spelling in Jam guidance. 

2.12 2.07   

• 

Corrected intermittent paper jams  when a document 
containing A3 & A5 size is printed in duplex mode. 

• 

Improved image positioning for booklet mode printout. 

• 

Improved the status monitor for the printer mode. 

• 

Improved the gauge indication for each tray of the finisher 
(printer admin) 

 

 

 

 

• 

Corrected the border location for multi-shot & repeat copy. 

• 

Corrected possible paper jams when entering the AR-FN3 
during staple mode printing. 

• 

Changed the width of margin on the copies that are made in 
the combination of dual page copy & margin shift modes. 

• 

Corrects Z folding and paper mis-feeds when feeding from 
the LCC in duplex copy mode. 

 
 

• 

Production start. 

• 

Changed the method of controlling the alignment plate and 
paddle to improve staking ability when staple sort mode is 
selected. 

• 

Upgraded due to the release of AR405. 

• 

Correct paper misfeeds when printing face down (AR405 only) 

• 

Include one-way clutch when shipping clutch when shipping.  

• 

Upgrade due to release of AR405 and ARPB2. 

• 

Upgraded to ARFN1N. 

• 

Changed the number of times the alignment plate operates 
from twice to once for copying operation in staple mode. 

• 

To correct error detection when the boomerang arm is 
interrupted by the tilt tray when first powered on. 

• 

Production start. 

• 

To improve the original paper feeding performance when 
using duplex copying – the operation timing of the paper 
feeding motor and the pressure solenoid has been changed. 

• 

The problem of multiple copying has been corrected (M/C 
locked if a jam occurred after second and following pages 
copied. 

• 

Production start. 

• 

To support AR405 (upgrade to AR-DE1N)