DOWNLOAD Sharp AR-285 (serv.man159) Service Manual ↓ Size: 49.7 KB | Pages: 2 in PDF or view online for FREE

Model
AR-285 (serv.man159)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
49.7 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / Parts Guide Correction - Corrona Wire. (WHITE)
File
ar-285-sm159.pdf
Date

Sharp AR-285 (serv.man159) Service Manual / Technical Bulletin ▷ View online

(4) Wire cutters should always be used when cutting the excess length.
The remaining length of extra wire should be within 1 mm. The wire cutting operation
should be carried out so that there is no stress placed on the wrapped portion of the
wire. (Please refer to the figure shown below.)
(5) The charger wire should be stretched so that the length of the tension spring
is approximately 10±0.5 mm. (Please refer to the figure shown below.)
(6) The charger wire should lie in the V groove of the TC case.
Sharp Electronics (UK)Ltd., Technical Services Group
Approximately 60°
Within 1 mm
Scribe line
Tension spring
Charger wire
The length of the tension
spring (10
±
0.5 mm) should
be measured from the scribe line
wire of the TC case, and should
be less than 1 mm.
(4) Wire cutters should always be used when cutting the excess length.
The remaining length of extra wire should be within 1 mm. The wire cutting operation
should be carried out so that there is no stress placed on the wrapped portion of the
wire. (Please refer to the figure shown below.)
(5) The charger wire should be stretched so that the length of the tension spring
is approximately 10±0.5 mm. (Please refer to the figure shown below.)
(6) The charger wire should lie in the V groove of the TC case.
Sharp Electronics (UK)Ltd., Technical Services Group
Approximately 60°
Within 1 mm
Scribe line
Tension spring
Charger wire
The length of the tension
spring (10
±
0.5 mm) should
be measured from the scribe line
wire of the TC case, and should
be less than 1 mm.
(4) Wire cutters should always be used when cutting the excess length.
The remaining length of extra wire should be within 1 mm. The wire cutting operation
should be carried out so that there is no stress placed on the wrapped portion of the
wire. (Please refer to the figure shown below.)
(5) The charger wire should be stretched so that the length of the tension spring
is approximately 10±0.5 mm. (Please refer to the figure shown below.)
(6) The charger wire should lie in the V groove of the TC case.
Sharp Electronics (UK)Ltd., Technical Services Group
Approximately 60°
Within 1 mm
Scribe line
Tension spring
Charger wire
The length of the tension
spring (10
±
0.5 mm) should
be measured from the scribe line
wire of the TC case, and should
be less than 1 mm.
(4) Wire cutters should always be used when cutting the excess length.
The remaining length of extra wire should be within 1 mm. The wire cutting operation
should be carried out so that there is no stress placed on the wrapped portion of the
wire. (Please refer to the figure shown below.)
(5) The charger wire should be stretched so that the length of the tension spring
is approximately 10±0.5 mm. (Please refer to the figure shown below.)
(6) The charger wire should lie in the V groove of the TC case.
Sharp Electronics (UK)Ltd., Technical Services Group
Approximately 60°
Within 1 mm
Scribe line
Tension spring
Charger wire
The length of the tension
spring (10
±
0.5 mm) should
be measured from the scribe line
wire of the TC case, and should
be less than 1 mm.
Display

Sharp AR-285 (serv.man159) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp AR-285 (serv.man159) Service Manual ↓ Size: 49.7 KB | Pages: 2 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp AR-285 (serv.man159) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AR-285 (serv.man159) Copying Equipment. Information contained in Sharp AR-285 (serv.man159) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.