Sharp AR-285 (serv.man12) Service Manual ▷ View online
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
46
7
Used to adjust the print density for each
density level (display value) in the copy
mode (multi value - photo mode).
An arbitrary print density can be set for
each density level (display value).
density level (display value) in the copy
mode (multi value - photo mode).
An arbitrary print density can be set for
each density level (display value).
Adjustment
Picture quality
Density
9
Used to adjust the print density for each
density level (display value) in the copy
mode (binary - character mode).
An arbitrary print density can be set for
each density level (display value).
density level (display value) in the copy
mode (binary - character mode).
An arbitrary print density can be set for
each density level (display value).
Adjustment
Picture quality
Density
10
Used to adjust the print density for each
density level (display value) in the copy
mode (binary - character, photo mode).
An arbitrary print density can be set for
each density level (display value).
density level (display value) in the copy
mode (binary - character, photo mode).
An arbitrary print density can be set for
each density level (display value).
Adjustment
Picture quality
Density
11
Used to adjust the print density for each
density level (display value) in the copy
mode (binary - photo mode).
An arbitrary print density can be set for
each density level (display value).
density level (display value) in the copy
mode (binary - photo mode).
An arbitrary print density can be set for
each density level (display value).
Adjustment
Picture quality
Density
12
Used to adjust the print density in the
FAXmode (all modes).
The print densities in all the modes
(Same as SIM 46-1-3A) (Target model:
AR-F230/S280/F280S/F280R)(FAX)
FAXmode (all modes).
The print densities in all the modes
(Same as SIM 46-1-3A) (Target model:
AR-F230/S280/F280S/F280R)(FAX)
Adjustment
Picture quality
Density
13
Used to adjust the print density in the
FAX mode (normal character mode).
(SIM 46-13A is same as SIM 46-12.)
(Target model:
AR-F230/S280/F280S/F280R)
(FAX model only)
FAX mode (normal character mode).
(SIM 46-13A is same as SIM 46-12.)
(Target model:
AR-F230/S280/F280S/F280R)
(FAX model only)
Adjustment
Picture quality
Density
14
Used to adjust the print density in the
FAX mode (small character modes).
(Target models:
AR-F230/S280/F280S/F280R) (FAX model
only)
FAX mode (small character modes).
(Target models:
AR-F230/S280/F280S/F280R) (FAX model
only)
Adjustment
Picture quality
Density
15
Used to adjust the print density in the
FAX mode (fine modes). (Target models:
AR-F230/S280/F280S/F280R)(FAX model
only)
FAX mode (fine modes). (Target models:
AR-F230/S280/F280S/F280R)(FAX model
only)
Adjustment
Picture quality
Density
16
Used to adjust the print density in the
FAX mode (fine modes). (Target models:
AR-F230/S280/F280S/F280R)(FAX model
only)
FAX mode (fine modes). (Target models:
AR-F230/S280/F280S/F280R)(FAX model
only)
Adjustment
Picture quality
Density
17
Used to execute shading correction and
display the correction value.
display the correction value.
Setting/Operation data
output/Check
(Display/Print)
output/Check
(Display/Print)
Operation
48
1
Used to adjust the copy magnification ratio
(main scanning direction, sub scanning
direction).
(main scanning direction, sub scanning
direction).
Adjustment
ICU
Picture quality
50
1
Used to adjust the copy image position
and the void area (image loss) on the
print paper in the copy mode. (The same
adjustment can be made with SIM 50-2
(simple method).)
and the void area (image loss) on the
print paper in the copy mode. (The same
adjustment can be made with SIM 50-2
(simple method).)
Adjustment
Picture quality
Image position
2
Used to adjust the copy image position
and the void area (image loss) on the
print paper in the copy mode. (Simple
adjustment)
(This simulation allows the same
simulation with SIM 50-1 more simply. )
and the void area (image loss) on the
print paper in the copy mode. (Simple
adjustment)
(This simulation allows the same
simulation with SIM 50-1 more simply. )
Adjustment
Picture quality
Image position
5
Used to adjust the print image position
(top margin) on the print paper in the print
mode.
(top margin) on the print paper in the print
mode.
Adjustment
Picture quality
Print area
10
Used to adjust the print image center
position. (Adjustment can be made for
each paper feed section.)
position. (Adjustment can be made for
each paper feed section.)
Adjustment
ICU
Picture quality
Image position
12
Used to adjust the print image center
position. (Adjustment can be made for
each document mode.)
position. (Adjustment can be made for
each document mode.)
Adjustment
ICU
Picture quality
Image position
51
1
Used to adjust the OPC drum separation
pawl ON time.
pawl ON time.
Adjustment
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
(Photoconductor/
Developing/Transfer/
Cleaning)
Operation
8 – 8
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
51
2
Used to adjust the contact pressure of
paper onto the resist roller in each section
(copier paper feed section, duplex paper
feed section, SPF paper feed section).
(When the print image position varies
greatly for the paper or when a lot of
paper jam troubles occur, the adjustment
is required.)
paper onto the resist roller in each section
(copier paper feed section, duplex paper
feed section, SPF paper feed section).
(When the print image position varies
greatly for the paper or when a lot of
paper jam troubles occur, the adjustment
is required.)
Adjustment
Paper transport
(Discharge/Switchback/
Transport)
(Discharge/Switchback/
Transport)
Operation
52
1
Used to adjust the duplex print mode
stacking capability. (Used to adjust the
stop position of the paper tray width
direction alignment plate in the duplex
unit. The adjustment is executed by
changing the width direction alignment
plate home position inthe software.)
stacking capability. (Used to adjust the
stop position of the paper tray width
direction alignment plate in the duplex
unit. The adjustment is executed by
changing the width direction alignment
plate home position inthe software.)
Adjustment
Duplex
Operation
53
1
Used to adjust the document stop position
in each operation mode of ADF/RADF.
(Target model:
AR-F230/S280/F280R/S330/280/285/335)
in each operation mode of ADF/RADF.
(Target model:
AR-F230/S280/F280R/S330/280/285/335)
Adjustment
ADF/RADF/UDH/SPF
Operation
2
Used to adjust the optical sensor
sensitivity in the ADF/RADF. (Target
models: AR-F230/S280/F280R/S330/
280/285/335)
sensitivity in the ADF/RADF. (Target
models: AR-F230/S280/F280R/S330/
280/285/335)
Adjustment
ADF/RADF/UDH/SPF
Operation
60
1
Used to check the operation (read/write)
of ICU. (SIMM MEMORY/ONBOARD
MEMORY)
of ICU. (SIMM MEMORY/ONBOARD
MEMORY)
Operation test/check
ICU
Operation
61
1
Used to test the operation of the laser
(exposure) unit.
(exposure) unit.
Operation test/check
Laser (Exposure)
Operation
2
Used to adjust the scanner (exposure)
laser power (absolute value) in the copy
mode.
laser power (absolute value) in the copy
mode.
Adjustment
Laser (Exposure)
Operation
3
Used to adjust the scanner (exposure)
laser power (absolute value) in the FAX
(auto) mode. (Target models: AR-F230/
S280/F280S/F280R)(FAX model only)
laser power (absolute value) in the FAX
(auto) mode. (Target models: AR-F230/
S280/F280S/F280R)(FAX model only)
Adjustment
Laser (Exposure)
Operation
62
1
Used to format the hard disk. (Target
models: AR-S330/280/285/335)(Models
with the hard disk installed only)
models: AR-S330/280/285/335)(Models
with the hard disk installed only)
Setting/
Data clear
Data clear
Memory
Others
2
Used to check the operation (read/write)
of the hard disk. (Target models:
AR-S330/280/285/335)(Models with the
hard disk installed only.) (Partial check)
of the hard disk. (Target models:
AR-S330/280/285/335)(Models with the
hard disk installed only.) (Partial check)
Operation test/check
Memory
Operation
3
Used to check the operation (read/write)
of the hard disk. (Target models:
AR-S330/280/285/335) (Only the models
with a hard disk) (All area check)
of the hard disk. (Target models:
AR-S330/280/285/335) (Only the models
with a hard disk) (All area check)
Operation test/check
Memory
Operation
63
1
Used to check the result of shading
correction. (The shading correctiondata are
displayed.)
correction. (The shading correctiondata are
displayed.)
Operation data
output/Check
(Display/Print)
output/Check
(Display/Print)
Laser (Exposure)
Operation
64
1
Used to check the operation of the printer
function (auto print operation). (Print
pattern, paper feed mode, print mode, the
number of sheets, and the density can be
set to an arbitrary value.)
function (auto print operation). (Print
pattern, paper feed mode, print mode, the
number of sheets, and the density can be
set to an arbitrary value.)
Operation test/check
Printer
Operation
65
1
Used to adjust the touch panel (LCD
display) detecting position.
display) detecting position.
Adjustment
Operation (Display/
Operation key)
Operation key)
2
Used to check the result of the touch
panel (LCD display) detecting position
adjustment. (The coordinates are
displayed.)
panel (LCD display) detecting position
adjustment. (The coordinates are
displayed.)
Operation data
output/Check
(Display/Print)
output/Check
(Display/Print)
Operation (Display/
Operation key)
Operation key)
68
1
Used to check the operation of infrared
communication I/F (Zaurus link) and the
related circuit. (Target models:
AR-F230/S280/F280S/F280R/S330)(Japan
models only)
communication I/F (Zaurus link) and the
related circuit. (Target models:
AR-F230/S280/F280S/F280R/S330)(Japan
models only)
Operation test/check
Interface
Operation
69
1
Used to set the A2 copy unit functions.
(Target models: AR-F230/S280/F280S/
F280R/S330/280/285/335)
(Target models: AR-F230/S280/F280S/
F280R/S330/280/285/335)
Setting
ICU
Specifications
Operation
mode
(Common)
(Common)
2
Used to check the operation of the A2
copyunit and the related circuit. Target
models: AR-F230/S280/F280S/F280R/
S330/280/285/335)
copyunit and the related circuit. Target
models: AR-F230/S280/F280S/F280R/
S330/280/285/335)
Operation test/check
ICU
Operation
(2) Usage
8 – 9
Purpose
Section
Item
Function (Purpose)
Code
Main
Sub
Adjustment
Picture quality
Used to adjust the print density for each
density level (display value) in the copy
mode (binary - character, photo mode).
An arbitrary print density can be set for
each density level (display value).
density level (display value) in the copy
mode (binary - character, photo mode).
An arbitrary print density can be set for
each density level (display value).
46
10
Picture quality
Density
Used to adjust the copy density in the
copy mode (binary - auto, character,
chatacter and photo, photo mode).
(The overall print density in each mode
(all of the specified density set for each
density level (display value)) can be
adjusted in each mode.)
copy mode (binary - auto, character,
chatacter and photo, photo mode).
(The overall print density in each mode
(all of the specified density set for each
density level (display value)) can be
adjusted in each mode.)
2
Picture quality
Density
Used to adjust the copy density in the
copy mode (multi value-auto, character,
character and photo, photo mode).
(The overall print density in each mode
(all of the specified density set for each
density level (display value)) can be
adjusted in each mode.)
copy mode (multi value-auto, character,
character and photo, photo mode).
(The overall print density in each mode
(all of the specified density set for each
density level (display value)) can be
adjusted in each mode.)
3
Picture quality
Density
Used to adjust the print density for each
density level (display value) in the copy
mode (multi Auto mode).
An arbitrary print density can be set for
each density level (display value).
density level (display value) in the copy
mode (multi Auto mode).
An arbitrary print density can be set for
each density level (display value).
5
Picture quality
Density
Used to adjust the print density for each
density level (display value) in the copy
mode (multi value-character, photo mode).
density level (display value) in the copy
mode (multi value-character, photo mode).
An arbitrary print density can be set for
each density level (display value).
each density level (display value).
6
Picture quality
Density
Used to adjust the print density for each
density level (display value) in the copy
mode (multi value - photo mode).
An arbitrary print density can be set for
each density level (display value).
density level (display value) in the copy
mode (multi value - photo mode).
An arbitrary print density can be set for
each density level (display value).
7
Picture quality
Density
Used to adjust the print density for each
density level (display value) in the copy
mode (binary - character mode).
An arbitrary print density can be set for
each density level (display value).
density level (display value) in the copy
mode (binary - character mode).
An arbitrary print density can be set for
each density level (display value).
9
Picture quality
Density
Used to adjust the print density for each
density level (display value) in the copy
mode (binary - photo mode).
An arbitrary print density can be set for
each density level (display value).
density level (display value) in the copy
mode (binary - photo mode).
An arbitrary print density can be set for
each density level (display value).
11
Picture quality
Density
Used to adjust the print density in the
FAXmode (all modes).
The print densities in all the modes (all of
the densities which ??)
(Same as SIM 46-1-3A) (Target model:
AR-F230/S280/F280S/F280R)(FAX)
FAXmode (all modes).
The print densities in all the modes (all of
the densities which ??)
(Same as SIM 46-1-3A) (Target model:
AR-F230/S280/F280S/F280R)(FAX)
12
Picture quality
Density
Used to adjust the print density in the
FAX mode (normal character mode).
(SIM 46-13A is same as SIM 46-12.)
(Target model:
AR-F230/S280/F280S/F280R)
(FAX model only)
FAX mode (normal character mode).
(SIM 46-13A is same as SIM 46-12.)
(Target model:
AR-F230/S280/F280S/F280R)
(FAX model only)
13
Picture quality
Density
Used to adjust the print density in the
FAX mode (small character modes).
(Target models:
AR-F230/S280/F280S/F280R) (FAX model
only)
FAX mode (small character modes).
(Target models:
AR-F230/S280/F280S/F280R) (FAX model
only)
14
Picture quality
Density
Used to adjust the print density in the
FAX mode (fine modes). (Target models:
AR-F230/S280/F280S/F280R)(FAX model
only)
FAX mode (fine modes). (Target models:
AR-F230/S280/F280S/F280R)(FAX model
only)
15
Picture quality
Density
Used to adjust the print density in the
FAX mode (fine modes). (Target models:
AR-F230/S280/F280S/F280R)(FAX model
only)
FAX mode (fine modes). (Target models:
AR-F230/S280/F280S/F280R)(FAX model
only)
16
Picture quality
Print area
Used to adjust the print image position
(top margin) on the print paper in the print
mode.
(top margin) on the print paper in the print
mode.
50
5
8 – 10
Purpose
Section
Item
Function (Purpose)
Code
Main
Sub
Adjustment
Picture quality
Image position
Used to adjust the copy image position
and the void area (image loss) on the
print paper in the copy mode. (The same
adjustment can be made with SIM 50-2
(simple method).)
and the void area (image loss) on the
print paper in the copy mode. (The same
adjustment can be made with SIM 50-2
(simple method).)
50
1
Picture quality
Image position
Used to adjust the copy image position
and the void area (image loss) on the
print paper in the copy mode. (Simple
adjustment)
(This simulation allows the same
simulation with SIM 50-1 more simply. )
and the void area (image loss) on the
print paper in the copy mode. (Simple
adjustment)
(This simulation allows the same
simulation with SIM 50-1 more simply. )
2
Paper transport
Operation
Used to adjust the manual paper feed tray
paper width detector detection level.
paper width detector detection level.
40
2
Paper transport
(Discharge/Switchback/
Transport)
(Discharge/Switchback/
Transport)
Operation
Used to adjust the contact pressure of
paper onto the resist roller in each section
(copier paper feed section, duplex paper
feed section, SPF paper feed section).
(When the print image position varies
greatly for the paper or when a lot of
paper jam troubles occur, the adjustment
is required.)
paper onto the resist roller in each section
(copier paper feed section, duplex paper
feed section, SPF paper feed section).
(When the print image position varies
greatly for the paper or when a lot of
paper jam troubles occur, the adjustment
is required.)
51
2
Duplex
Operation
Used to adjust the duplex print mode
stacking capability. (Used to adjust the
stop position of the paper tray width
direction alignment plate in the duplex
unit. The adjustment is executed by
changing the width direction alignment
plate home position inthe software.)
stacking capability. (Used to adjust the
stop position of the paper tray width
direction alignment plate in the duplex
unit. The adjustment is executed by
changing the width direction alignment
plate home position inthe software.)
52
1
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
(Photoconductor/
Developing/Transfer/
Cleaning)
Photo
conductor
conductor
Operation
Used to adjust the sensitivity (gain) of the
OPC drum mark sensor and the image
density sensor.
OPC drum mark sensor and the image
density sensor.
44
2
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
(Photoconductor/
Developing/Transfer/
Cleaning)
Operation
Used to adjust the OPC drum separation
pawl ON time.
pawl ON time.
51
1
Operation (Display/
Operation key)
Operation key)
Used to adjust the touch panel (LCD
display) detecting position.
display) detecting position.
65
1
ICU
Picture quality
Used to adjust the copy magnification ratio
(main scanning direction, sub scanning
direction).
(main scanning direction, sub scanning
direction).
48
1
ICU
Picture quality
Image position
Used to adjust the print image center
position. (Adjustment can be made for
each paper feed section.)
position. (Adjustment can be made for
each paper feed section.)
50
10
ICU
Picture quality
Image position
Used to adjust the print image center
position. (Adjustment can be made for
each document mode.)
position. (Adjustment can be made for
each document mode.)
12
ADF/RADF/UDH/SPF
Operation
Used to adjust the document stop position
in each operation mode of ADF/RADF.
(Target model:
AR-F230/S280/F280R/S330/280/285/335)
in each operation mode of ADF/RADF.
(Target model:
AR-F230/S280/F280R/S330/280/285/335)
53
1
ADF/RADF/UDH/SPF
Operation
Used to adjust the optical sensor
sensitivity in the ADF/RADF. (Target
models: AR-F230/S280/F280R/
S330/280/285/335)
sensitivity in the ADF/RADF. (Target
models: AR-F230/S280/F280R/
S330/280/285/335)
2
Sorter/Finisher
Operation
Used to adjust the finisher stacking
capability. (Used to adjust the stop
position of the finishser paper width
direction alignment plate (jogger). This
adjustment is made by changing the width
direction alignment plate home position by
the software.)
(Target model:AR-S330/280/285/335)
capability. (Used to adjust the stop
position of the finishser paper width
direction alignment plate (jogger). This
adjustment is made by changing the width
direction alignment plate home position by
the software.)
(Target model:AR-S330/280/285/335)
3
6
Laser (Exposure)
Operation
Used to adjust the scanner (exposure)
laser power (absolute value) in the copy
mode.
laser power (absolute value) in the copy
mode.
61
2
Laser (Exposure)
Operation
Used to adjust the scanner (exposure)
laser power (absolute value) in the FAX
(auto) mode. (Target models: AR-F230/
S280/F280S/F280R)(FAX model only)
laser power (absolute value) in the FAX
(auto) mode. (Target models: AR-F230/
S280/F280S/F280R)(FAX model only)
3
Others
Operation
Used to adjsut the document size sensor
detection level.
detection level.
41
2
8 – 11
Click on the first or last page to see other AR-285 (serv.man12) service manuals if exist.