DOWNLOAD Sharp AR-285 (serv.man12) Service Manual ↓ Size: 877.93 KB | Pages: 118 in PDF or view online for FREE

7 - 1

Purpose

Setting/Operation test/check

Function
(Purpose)

Used to set the aging operation conditions.

Section

Item

Operation

Operation/
Procedure

1. Press each corresponding key to set for the aging operation.

(Set items of each key)

[AGING]

Aging setting

[MISFEED DISABLE]

Jam detection enable/disable setting

[FUSING DISABLE]

Fusing operation enable/disable setting

[WARMUP DISABLE]

Warm-up save setting

[INTERVAL]

Intermittent setting (Valid only in [AGING] setting)

[DV CHECK DISABLE]

Developing unit detection enable/disable setting

[SHADING DISABLE]

Shading enable/disable setting

The selected key is highlighted.

2. Press the [EXECUTE] key.

Aging is set and the display returns to the simulation main code entry display.

When this simulation is executed, the machine resumes operation regardless of setting (changing) of aging.

Note

7 - 6

Purpose

Setting/Operation test/check

Function
(Purpose)

Used to set the cycle of intermittent aging.

Section

Item

Operation

8 – 43

Operation/
Procedure

1. Enter the interval aging cycle time (sec) with the 10-key pad.

2. Press [OK] key to set the entered cycle time.

Note

7 - 8

Purpose

Setting/Operation test/check

Function
(Purpose)

Used to set YES/NO of display of the warmup time.

Section

Item

Operation

Operation/
Procedure

Press the [EXECUTE] key to set the warmup time display.
When the [EXECUTE] key is pressed, the warmup time display setting is executed and the display returns to the
simulation main code entry display.

When this simulation is canceled after completion of it, the machine resumes operation regardless of setting (changing)
of warmup time display.

After completion of warming up, the warm-up time is displayed.

Note

8 – 44

8 - 1

Purpose

Adjustment/Operation test/check

Function
(Purpose)

Used to check and adjust the operation of the developing bias voltage in each print mode and the control circuit.
(for OPC drum type B)

Section

Image process
(Photoconductor/Developing/Transfer/Cleaning)

Developer/Toner Hopper

Item

Operation/
Procedure

(The developing bias output voltage in each of the following print modes can be adjusted and checked.)

AUTO

: Auto mode

* (500) (–500V 

±

5V)

CHARA

: Character mode

* (500) (–500V 

±

5V)

CHARA PHOTO : Character/Photo mode

* (500) (–500V 

±

5V)

PHOTO

: Photo mode

* (500) (–500V 

±

5V)

TONER SAVE

: Toner save mode

* (500) (–500V 

±

5V)

PRINTER

: Printer mode

* (500) (–500V 

±

5V)

FAX

: FAX mode

* (500) (–500V 

±

5V) 

PLUS

: Cleaning mode developing bias voltage

* (150) (+150V 

±

5V)

* (  ): Default

1. Select the print mode with [

↑

] key and [

↓

] key.

2. Enter the adjustment value with the 10-key pad.

3. Press the [EXECUTE] key.

The [EXECUTE] key is highlighted, the adjustment value entered in procedure 2 is set, and the voltage corresponding
to the set value is supplied.

After supplying the voltage for 30 sec, the [EXECUTE] key returns to the normal display.

If the [EXECUTE] key is pressed while the voltage is supplied, the voltage output is stopped and the [EXECUTE] key
returns to the normal display.

Note

8 – 45

8 - 2

Purpose

Adjustment/Operation test/check

Function
(Purpose)

Used to check and adjust the operation of the main charger grid voltage in each print mode and the control circuit.
(for OPC drum type B)

Section

Image process
(Photoconductor/Developing/Transfer/Cleaning)

Photo conductor

Item

Operation/
Procedure

(The charging/grid output voltage in each print mode can be adjusted and checked.)

AUTO

: Auto mode

* (641) (–642 

±

5V)

CHARA

: Character mode

* (641) (–642 

±

5V)

CHARA PHOTO : Character/Photo mode

* (641) (–642 

±

5V)

PHOTO

: Photo mode

* (641) (–642 

±

5V)

PRINTER

: Printer mode

* (641) (–642 

±

5V)

FAX

: FAX mode

* (641) (–642 

±

5V)

* (  ): Default

1. Select the print mode with [

↑

] key and [

↓

]key.

2. Enter the adjustment value with the 10-key pad.

3. Press the [EXECUTE] key.

The [EXECUTE] key is highlighted, the adjustment value entered in procedure 2 is set, and the voltage corresponding
to the set value is supplied.

After supplying the voltage for 30 sec, the [EXECUTE] key returns to the normal display.

If the [EXECUTE] key is pressed while the voltage is supplied, the voltage output is stopped and the [EXECUTE] key
returns to the normal display.

Note

8 - 6

Purpose

Adjustment/Operation test/check

Function
(Purpose)

Used to check and adjust the transfer charger current and the control circuit.

Section

Image process
(Photoconductor/Developping/Transfer/Cleaning)

Copy

Item

8 – 46