DOWNLOAD Sharp AR-285 (serv.man12) Service Manual ↓ Size: 877.93 KB | Pages: 118 in PDF or view online for FREE

Model
AR-285 (serv.man12)
Pages
118
Size
877.93 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / AR280 285 335 Service Manual-Simulation Codes
File
ar-285-sm12.pdf
Date

Sharp AR-285 (serv.man12) Service Manual ▷ View online

[8] SIMULATION
(Diagnostics, setting, adjustment value
input, data display)
1. Outline and purpose
There are following simulation functions to check the machine opera-
tions, troubleshoot, find causes, make various settings, improves ad-
justment work speeds and serviceability. 
1) Various adjustments
2) Specification and function setting
3) Trouble cancel
4) Operation check
5) Counters check, setting, clear
6) Machine operation conditions (operation history) data check, clear
7) Transmission of various data (adjustment, setting, operations,
counter, etc.)
The operating procedures and displays slightly differ from the form of
the machine operation panel.
The typical forms are as follows:
1) Code system: Values input and mode selection are made with the
10-key pad and various function keys. 
2) Switch system: Simulation mode selection is made by combina-
tion of switch setting. 
3) Values and mode selection is made with various function keys. As
a special one, a jumper wire is used to connect the check points
on the PWB to select the desired mode. 
2. Code system simulation 
A. Operating procedures and operations
Entering the simulation mode
1) Program (P) key 
 Interrupt key 
 Clear key 
 Interrupt key
(The machine enters the standby mode for the simulation main
code.)
2) Enter the main code with 10-key pad. 
 Press START key.
3) Enter the sub code of with 10-keypad. 
 Press START key.
4) Select the mode and the item with the 1-key pad and the function
key. 
5) The machine enters the selected mode.
To start the simulation, press the START key or the function key.
To cancel the current simulation mode and to change the main
code and the sub code, press the interrupt key. 
The simulation mode is canceled and the machine returns to the
normal operation mode. 
1) Press the all clear key. 
SIM 46-12, 13, 14, 15, 16, SIM66 and SIM68 are provided only for
Japan models (FAX mode/ASK/IrDA).
8 – 1
YES
NO
NO
YES
YES
YES
NO
NO
NO
YES
NO
YES
YES
NO
NO
YES
YES
NO
Standby for entry of SIM
sub code
Enter SIM sub code with
the 10-key.
Press the START button.
Press the START button.
The display is made according
to the selected mode and the item.
START (Normal mode)
Press the Program (P) key.
Press the interrupt key.
Press the clear key.
Press the interrupt key.
Standby for entry of
SIM code.
Enter the main code of
SIM with the 10-key.
The main code of SIM
is displayed.
Press the START button.
Is there a sub code ?
Select the mode and the
item with the 10-key and
the function key.
Operation check ?
Operating conditions
check ?
Data clear ?
Adjustments
or setting (counter data
change) ?
Do you
want to change the
content ?
Enter the new setting and
adjustment values.
Press the interrupt key.
Press the START button.
Operation is made according
to the selected mode and item.
Press the START button.
The display is made according to
the selected some and the item.
Press the START button.
Press the START button.
Is it the same
simulation ?
Press the interrupt key.
Do you want
to perform another
simulation ?
Do you
want to end the
simulation ?
The changed content
is stored.
The simulation mode
is canceled.
Press the clear all key.
Operation is made according
to the selected mode and the item.
(Other modes)
The selected mode and
the item are cleared.
8 – 2
B. List
(1) Main/Sub
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
1
1
Used to check the operation of the
scanner unit and its control circuit.
Operation test/check
Optical (Image
scanning)
Operation
2
Used to check the operatioin of sensors
and detectors in the scanner section and
the related circuit.
Operation test/check
Optical (Image
scanning)
Operation
2
1
Used to adjust the time from detection of
the copy paper lead edge by PPD3 to
OFF of the transport roller clutch
(TRC2/TRC1).
The copy paper stops before reaching the
resist roller.  This simulation is used to
adjust the stop position.
Operation test/check
ADF/RADF/UDH/SPF
Operation
2
Used to check the operation of sensors
and detectors in the RADF/ADF/SPF units
and the related circuit.
Operation test/check
ADF/RADF/UDH/SPF
Operation
3
Used to check the operation of the loads
in the RADF/ADF/SPF units and the
control circuits.
Operation test/check
ADF/RADF/UDH/SPF
Operation
3
2
Used to check the operation of sensors
and detectors in the sorter and the related
circuit.
Operation test/check
Sorter/Finisher
Operation
3
Used to check the operation of the loads
in the sorter and the control circuit.
Operation test/check
Sorter/Finisher
Operation
6
Used to adjust the finisher stacking
capability. (Used to adjust the stop
position of the finishser paper width
direction alignment plate (jogger). This
adjustment is made by changing the width
direction alignment plate home position by
the software.) 
(Target model:AR-S330/280/285/335)
Adjustment
Sorter/Finisher
Operation
4
2
Used to check the operation of sensors
and detectors in the paper feed section
(desk feed, large capacity tray) and the
related circuit.
Operation test/check
Paper transport
Operation
3
Used to check the operation of the loads
in the paper feed section (desk paper
feed, large capacity tray) and the control
circuits.
Operation test/check
Paper transport
Operation
5
1
Used to check the operation of the
display, LCD in the operation panel, and
control circuit.
Operation test/check
Operation (Display/
Operation key)
Operation
2
Used to check the operation of the heater
lamp and the control circuit.
Operation test/check
Fixing (Fusing)
Operation
3
Used to check the oepration of the copy
lamp and the control circuit.
Operation test/check
Optical (Image
scanning)
Operation
4
Used to check the operation of the
discharge lamp and the control circuit.
Operation test/check
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
Others
Operation
6
1
Used to check the oepration of the loads
(clutches and solenoids) in the paper
transport system and the control circuit.
Operation test/check
Paper transport
(Discharge/Switchback/
Transport)
Operation
2
Used to check the operation of each fan
motor and its control circuit.
Operation test/check
Others
Operation
7
1
Used to set the aging operation
conditions.
Setting/
Operation test/check
Operation
6
Used to set the cycle of intermittent aging.
Setting/
Operation test/check
Operation
8
Used to set YES/NO of display of the
warmup time.
Setting/
Operation test/check
Operation
8
1
Used to check and adjust the operation of
the developing bias voltage in each print
mode and the control circuit.
(for OPC drum type B)
Adjustment/
Operation test/check
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
Developer/
Toner Hopper
2
Used to check and adjust the operation of
the main charger grid voltage in each print
mode and the control circuit.
(for OPC drum type B)
Adjustment/
Operation test/check
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
Photo
conductor
8 – 3
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
8
6
Used to check and adjust the transfer
charger current and the control circuit.
Adjustment/
Operation test/check
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
Copy
7
Used to check and adjust the operation of
the separation charger voltage and its
control circuit.
Adjustment/
Operation test/check
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
Others
9
1
Used to check the operation of the loads
(clutches and solenoids) in the duplex
section and the control circuit.
Operation test/check
Duplex
Operation
2
Used to check the operation of sensors
and detectors in the duplex section and
the control circuit.
Operation test/check
Duplex
Operation
4
Used to check the operation of the duplex
unit alignment plate and its control circuit.
Operation test/check
Duplex
Operation
10
0
Used to check the operation of the toner
motor and its control circuit. 
(Note) 
Do not execute this simulation with toner
in the toner hopper. If executed, excessive
toner may enter the developing section,
causing an overtoner trouble.  Be sure to
remove the toner motor from the toner
hopper before executing this simulation.
Operation test/check
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
Developer/
Toner Hopper
Operation
13
0
Used to cancel the self diag U1 trouble.
Clear/Cancel (Trouble
etc.)
Trouble
Error
14
0
Used to cancel the self diag
U1/LOC/U2/PF troubles.
Clear/Cancel (Trouble
etc.)
Trouble
Error
15
0
Used to cancel the self diag U4 -
09/20/21/22 (large capacity tray) trouble.
Clear/Cancel (Trouble
etc.)
Paper transport
Trouble
Error
16
0
Used to cancel the self diag U2 trouble.
Clear/Cancel (Trouble
etc.)
Trouble
Error
17
0
Used to cancel copy inhibition by the host
computer during the self diag PF.
Clear/Cancel (Trouble
etc.)
Communication unit
(TEL/LIU/MODEM etc.)
Trouble
Error
21
1
Used to set the maintenance cycle.
Setting
Specifications
Counter
22
1
Used to check the print out count of each
section in each operation mode. 
(Used to check the maintenance timing.)
Operation data
output/Check
(Display/Print)
Counter
2
Used to check the total numbers of
misfeed and troubles. (When the number
of misfeed is considerably great, it is
judged as necessary for repair. The
misfeed rate is obtained by dividing this
count value with the total counter value.)
Operation data
output/Check
(Display/Print)
Trouble
3
Used to check the misfeed positions and
the number of misfeed in each position. (If
the number of misfeed is considerably
great, it can be judged as necessary for
repair.) (Sections other than
ADF/RADF/SPF sections)
Operation data
output/Check
(Display/Print)
Trouble
Mis-feed
4
Used to check the total trouble (self diag)
history.
Operation data
output/Check
(Display/Print)
Trouble
5
Used to check the ROM version of each
unit (section).
Others
Software
6
Used to output the list of the setting and
adjustment data (simulations, FAX soft
switch, counters).
Operation data
output/Check
(Display/Print)
Data
Adjust/Setting
data
7
Used to display the key operator code.
(This simulation is used when the
customer forgets the key operator code.)
User data output/Check
(Display/Print)
Data
User data
8
Used to check the number of use of the
staple, the ADF, RADF, SPF, and
scanning.
Operation data
output/Check
(Display/Print)
Counter
9
Used to check the number of use of each
paper feed section. (the number of prints)
Operation data
output/Check
(Display/Print)
Paper transport
Counter
8 – 4
Page of 118
Display

Sharp AR-285 (serv.man12) Service Manual ▷ Download

  • DOWNLOAD Sharp AR-285 (serv.man12) Service Manual ↓ Size: 877.93 KB | Pages: 118 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp AR-285 (serv.man12) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AR-285 (serv.man12) Copying Equipment. Information contained in Sharp AR-285 (serv.man12) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.