DOWNLOAD Sharp AR-275 (serv.man145) Service Manual ↓ Size: 187.83 KB | Pages: 3 in PDF or view online for FREE

DCE231

Sharp Electronics (UK) Ltd., Technical Services Group

AR235/275

Block No.13, 15, 20, 21 and 31 of Parts Guide are modified.

1.  Block 15: TC unit parts supply format is changed.

For TC unit, whole unit and sub parts have previously been supplied.  However,
supply of sub parts is discontinued and only the whole unit is supplied.  This is due to
special set-up procedure required when replacing individual parts in the TC unit.
For replacement of parts No.1-20, replace the whole TC unit (CHLDR0083QS51).

2.  Block 13 (Transport section) and 31 (2nd transport section separation plate unit

sheet) have been changed.
Block 13No.23 Separation pad (GPAD-0001QSZZ)

- discontinued

No.23 Pressing plate LPD (PSHEZ0242QSZZ)

- added

No.38 Separation front Mylar (PSHEZ0326QSZZ) - added
No.39 Separation front block (PSHEZ0331QSZZ) - added

TECHNICAL BULLETIN

DCE231

Sharp Electronics (UK) Ltd., Technical Services Group

Block 31No.14 Separation pad (GPAD-0001QSZZ)

- discontinued

No.14 Pressing plate LPD (PSHEZ0242QSZZ)

- added

No.27 Separation front Mylar (PSHEZ0326QSZZ) - added
No.28 Separation front block (PSHEZ0331QSZZ) - added

3.  The following part is added to fusing unit 1 in block 20.

No.13 Fusing front paper guide (PGIDH0092QSZZ)

- added

No.30 Heat roller lower plate (LPLTM0256QSZZ)

- added

No.31 Screw (XBBSD30P4000)

- added

No.32 Upper cleaning pad unit (CPLTM0282QS01)

- added

DCE231

Sharp Electronics (UK) Ltd., Technical Services Group

13-23

31-14

GPAD-0001QSZZ

PSHEZ0242QSZZ

AK

Pressing plate
LPD

4

13-38

31-27

PSHEZ0326QSZZ

AB

Separation front
mylar

13-39

31-28

PSHEZ0331QSZZ

AC

Separation front
block

20-13

PGIDH0092QSZZ

AL

Fusing front
paper guide

20-30

LPLTM0256QSZZ

AG

Heat roller lower
plate

20-31

XBBSD30P04000

AA

Screw (3X4)

AR-235
AR-275

30-32

-

CPLTM0282QS01

AS

Upper cleaning
pad U

6

1. Interchangeable.

4. Not Interchangeable.

2. Current type can be used in place of new type.

New type cannot be used in place of current type.

5. Interchangeable if replaced with same types of related

parts in use.

3. Current type cannot be used in place of new type.

New type can be used in place of current type.

6. Others.

Parts marked with " 

" is important for maintaining the safety of the set. Be sure to replace these parts with specified ones

for maintaining the safety and performance of the set.