Sharp AR-250 (serv.man9) User Manual / Operation Manual ▷ View online
3-1
CHAPTER
3
CHAPTER 3
SPECIAL FUNCTIONS
This chapter describes the special copying functions including various
image editing functions which have been made possible by digital image
processing technology.
image editing functions which have been made possible by digital image
processing technology.
Page
●
●
●
●
●
XY ZOOM
.......................................
3-2
●
●
●
●
●
MARGIN SHIFT
...................................
3-4
●
●
●
●
●
ERASE
.........................................
3-6
●
●
●
●
●
DUAL PAGE COPYING
.............................
3-8
●
●
●
●
●
MULTI SHOT
....................................
3-10
●
●
●
●
●
COVERS
.......................................
3-13
●
●
●
●
●
TRANSPARENCY FILM WITH INSERT SHEETS
..........
3-15
●
●
●
●
●
PAMPHLET COPY
................................
3-17
●
●
●
●
●
IMAGE EDITING FUNCTIONS
.......................
3-20
Centring
........................................
3-20
Repeat copy
.....................................
3-22
B/W reverse
.....................................
3-25
Binding change
...................................
3-27
●
●
●
●
●
TEXT STAMP
....................................
3-30
Date
..........................................
3-30
Select stamp
....................................
3-33
Watermark
......................................
3-36
Page number
....................................
3-39
●
●
●
●
●
SETTING REVIEW
................................
3-42
3-2
CHAPTER
3
1
Place the original in the optional document feeder tray
or on the document glass.
or on the document glass.
2
Press the “COPY RATIO” key on the touch panel.
3
Press the “XY ZOOM” key.
●
The following screen will appear.
4
Use the reduction, enlargement , and ZOOM (
,
)
keys to change the copy ratio in the horizontal (X)
direction.
direction.
●
Press a reduction key or an enlargement key to set the
approximate ratio, then press the
approximate ratio, then press the
key to decrease the ratio
or
key to increase the ratio.
XY ZOOM
The XY ZOOM feature allows the horizontal and vertical copy ratios to
be changed independently. If this feature is selected, the copy ratios
can be set from 25% to 800%.
be changed independently. If this feature is selected, the copy ratios
can be set from 25% to 800%.
●
The allowable copy ratio range is limited in the following conditions.
Copying from the optional SPF : 25% to 200%
Photo mode, pamphlet copy, repeat copy: 25% to 400%
Copying from the optional SPF : 25% to 200%
Photo mode, pamphlet copy, repeat copy: 25% to 400%
SPECIAL FUNCTIONS
XY zoom
READY TO COPY.
AUTO
XY ZOOM
CANCEL
X
Y
100%
ZOOM
100
100
%
%
OK
70%
64%
50%
141%
200%
400%
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
ELECT
100%
COPY RATIO
A4
AUTO
XY ZOOM
10
ZOO
MENU
EXPOSURE
PAPER S
AUTO
81%
B5 A5
B4 A4
B4 A4
70%
A4 A5
A3 A4
A3 A4
READY TO COPY.
AUTO
XY ZOOM
X
Y
100%
ZOOM
100
100
%
%
OK
70%
64%
50%
141%
200%
400%
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
CANCEL
Original
Copy
3-3
CHAPTER
3
5
Press the
Y
key.
●
The copy ratio in the vertical (Y) direction will be highlighted.
6
Use the reduction, enlargement, and ZOOM (
,
)
keys to change the copy ratio in the vertical (Y) direction.
●
To change the copy ratio in the horizontal direction again, press
the
the
X
key.
●
The message “
IMAGE IS LARGER THAN THE COPY PAPER.
”
may appear, indicating that the selected copy ratio is too large
for the copy paper size. However, if you press the START (
for the copy paper size. However, if you press the START (
)
key, a copy will be made.
7
Press the “OK” key.
8
Press the “PAPER SELECT” key and select the paper
tray with the desired paper size.
tray with the desired paper size.
●
If the AUTO PAPER SELECT mode is on, the appropriate copy
paper size will have been automatically selected based on the
original size and selected copy ratios.
paper size will have been automatically selected based on the
original size and selected copy ratios.
9
Enter the desired number of copies.
10
Press the START (
) key.
●
If the optional document feeder is used, scanning of originals and
copying will start.
copying will start.
●
If the document glass is used in the SORT mode, proceed to the
next step.
next step.
11
Replace the finished original with the next original after
the START (
the START (
) key indicator lights up, and then press
the START (
) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
on the touch panel.
●
Copying will start at this time.
●
To cancel this function, press the “CANCEL” key or the “XY
ZOOM” key again as in step 3.
ZOOM” key again as in step 3.
SPECIAL FUNCTIONS
XY zoom
TO COPY.
X
Y
100%
ZOOM
%
%
50
100
%
%
%
READY TO COPY.
AUTO
EXPOSURE
PAPER SELECT
X—50% Y—70%
COPY RATIO
AUTO 8/ 11
1
2
1. A4
2. A3
1
2
3
4
5
6
7
8
9
0
P
PROGRAM
AUDIT CLEAR
INT
CA
CLEAR ALL
START
XY ZOOM
READY TO COPY.
AUTO
XY ZOOM
X
Y
ZOOM
50
100
70%
64%
50%
EXPOSURE
PAPER SELECT
AUTO A4
%
%
100%
CANCEL
OK
141%
200%
400%
READ-END
AUTO IMAGE
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
WHEN FINISHED, PRESS [READ-END].
AUTO
EXPOSURE
PAPER SELECT
X—50% Y—70%
COPY RATIO
A4
3-4
CHAPTER
3
SPECIAL FUNCTIONS
Margin shift
The MARGIN SHIFT feature, in its initial setting, automatically shifts the text
or image to the right both on one-sided copies and on the front side of two-
sided copies. The text or image is shifted to the left on the reverse side of
two-sided copies. Shift direction can be changed to left, upper or lower in
the manner described below in step 4.
or image to the right both on one-sided copies and on the front side of two-
sided copies. The text or image is shifted to the left on the reverse side of
two-sided copies. Shift direction can be changed to left, upper or lower in
the manner described below in step 4.
●
The standard shift amount is 10 mm (1/2"), but can be changed from
0 mm to 20 mm in 1 mm increments (from 0" to 1" in 1/8" increments).
0 mm to 20 mm in 1 mm increments (from 0" to 1" in 1/8" increments).
★ KEY OPERATOR The initial shift setting can be changed from 0 mm
to 20 mm in 1 mm increments (from 0" to 1" in 1/8" increments). See page
8-16.
8-16.
NOTE:
The front side and reverse side are referred to as “SIDE 1” and “SIDE 2”
respectively on the touch panel.
The front side and reverse side are referred to as “SIDE 1” and “SIDE 2”
respectively on the touch panel.
MARGIN SHIFT
Expanded margin
Copy
Original
1
Place the original in the optional document feeder tray
or on the document glass.
or on the document glass.
2
Press the SPECIAL MODES key.
●
The SPECIAL MODES screen will appear.
READY TO COPY.
SPECIAL MODES
MARGIN SHIFT
MULTI SHOT
PAMPHLET COPY
ERASE
COVERS
IMAGE EDIT
TEXT STAMP
TRANSPARENCY
INSERTS
DUAL PAGE
COPY
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
Margin is expanded here.
Margin is expanded
here.
here.
READY TO CO
(Initial setting:
copy image shifted to the right)
copy image shifted to the right)
