DOWNLOAD Sharp AR-122E (serv.man56) Service Manual ↓ Size: 272.67 KB | Pages: 5 in PDF or view online for FREE

Model
AR-122E (serv.man56)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
272.67 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / Sect. 5 Maintenance
File
ar-122e-sm56.pdf
Date

Sharp AR-122E (serv.man56) User Manual / Operation Manual ▷ View online

24
CLEANING THE UNIT
Proper care is essential in order to get clean, sharp copies. Be sure to take a few 
minutes to regularly clean the unit.
Cabinet
Wipe the cabinet with a soft, clean cloth.
Original table and the back side of the original cover
Stains on the glass or cover will also be copied. Wipe the glass and cover with a soft, 
clean cloth. If necessary, dampen the cloth with a glass cleaner.
• Before cleaning, be sure to turn the power switch off and remove the 
power cord from the outlet.
• Do not use thinner, benzene or other volatile cleaning agents. Doing 
so may cause deformation, discoloration, deterioration or malfunction.
Original table
Original cover
25
5
Transfer charger
If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean 
the charger using the following procedure.
1
Turn the power switch off. (p.13)
2
Open the side cover while pressing the side cover open button.
3
Take the charger cleaner out by holding the tab. Set the charger 
cleaner onto the right end of the transfer charger, gently slide 
the cleaner to the left end, and then remove it. Repeat this 
operation two or three times.
4
Return the charger cleaner 
to its original position. 
Close the side cover by 
pressing the round 
projections near the side 
cover open button.
5
Turn the power switch on. (p.12)
Slide the charger cleaner from the right end to the left end along 
the groove of the transfer charger. If the cleaner is stopped on 
the way, smudges on copies may occur.
25
5
Transfer charger
If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean 
the charger using the following procedure.
1
Turn the power switch off. (p.13)
2
Open the side cover while pressing the side cover open button.
3
Take the charger cleaner out by holding the tab. Set the charger 
cleaner onto the right end of the transfer charger, gently slide 
the cleaner to the left end, and then remove it. Repeat this 
operation two or three times.
4
Return the charger cleaner 
to its original position. 
Close the side cover by 
pressing the round 
projections near the side 
cover open button.
5
Turn the power switch on. (p.12)
Slide the charger cleaner from the right end to the left end along 
the groove of the transfer charger. If the cleaner is stopped on 
the way, smudges on copies may occur.
25
5
Transfer charger
If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean 
the charger using the following procedure.
1
Turn the power switch off. (p.13)
2
Open the side cover while pressing the side cover open button.
3
Take the charger cleaner out by holding the tab. Set the charger 
cleaner onto the right end of the transfer charger, gently slide 
the cleaner to the left end, and then remove it. Repeat this 
operation two or three times.
4
Return the charger cleaner 
to its original position. 
Close the side cover by 
pressing the round 
projections near the side 
cover open button.
5
Turn the power switch on. (p.12)
Slide the charger cleaner from the right end to the left end along 
the groove of the transfer charger. If the cleaner is stopped on 
the way, smudges on copies may occur.
Page of 5
Display

Sharp AR-122E (serv.man56) User Manual / Operation Manual ▷ Download