DOWNLOAD Sharp AR-122E (serv.man56) Service Manual ↓ Size: 272.67 KB | Pages: 5 in PDF or view online for FREE

Model
AR-122E (serv.man56)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
272.67 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / Sect. 5 Maintenance
File
ar-122e-sm56.pdf
Date
PREV: Sharp AR-122E (serv.man55) User Manual / Operation Manual

Sharp AR-122E (serv.man56) User Manual / Operation Manual ▷ View online

23
5
6
Close the front cover and 
then the side cover by 
pressing the round 
projections near the side 
cover open button. The 
indicator will go out and the 
start (
) indicator will light 
up.
TONER CARTRIDGE LIFE
To find out the approximate quantity of toner remaining, follow the procedure 
described below.
1
Press and hold down the light (
) and dark (
) keys 
simultaneously for more than 5 seconds until all the alarm 
indicators (
, 
, 
, 
)  blink and  "
" appears in the 
display.
2
Press and hold down the copy ratio display 
(%) 
key for more thn 
5 seconds.
The approximate quantity of toner remaining will be indicated in the display 
as a percentage ("100", "75", "50", "25" or "10" is displayed). When the 
percentage is less than 10%, 
(
) 
will be displayed.
3
Press the light (
) or dark (
) key.
All alarm indicators wil go out.
When closing the covers, 
be sure to close the front 
cover securely and then 
close the side cover. If the 
covers are closed in the 
wrong order, the covers 
may be damaged.
Even after a new toner cartridge is installed, the start (
) indicator 
may not light up, indicating copying cannot be restarted (toner is not 
sufficiently fed). In this case, open and close the side cover. The 
copier will feed toner again approximately 2 minutes and then 
copying can be restarted.
24
CLEANING THE UNIT
Proper care is essential in order to get clean, sharp copies. Be sure to take a few 
minutes to regularly clean the unit.
Cabinet
Wipe the cabinet with a soft, clean cloth.
Original table and the back side of the original cover
Stains on the glass or cover will also be copied. Wipe the glass and cover with a soft, 
clean cloth. If necessary, dampen the cloth with a glass cleaner.
• Before cleaning, be sure to turn the power switch off and remove the 
power cord from the outlet.
• Do not use thinner, benzene or other volatile cleaning agents. Doing 
so may cause deformation, discoloration, deterioration or malfunction.
Original table
Original cover
25
5
Transfer charger
If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean 
the charger using the following procedure.
1
Turn the power switch off. (p.13)
2
Open the side cover while pressing the side cover open button.
3
Take the charger cleaner out by holding the tab. Set the charger 
cleaner onto the right end of the transfer charger, gently slide 
the cleaner to the left end, and then remove it. Repeat this 
operation two or three times.
4
Return the charger cleaner 
to its original position. 
Close the side cover by 
pressing the round 
projections near the side 
cover open button.
5
Turn the power switch on. (p.12)
Slide the charger cleaner from the right end to the left end along 
the groove of the transfer charger. If the cleaner is stopped on 
the way, smudges on copies may occur.
25
5
Transfer charger
If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean 
the charger using the following procedure.
1
Turn the power switch off. (p.13)
2
Open the side cover while pressing the side cover open button.
3
Take the charger cleaner out by holding the tab. Set the charger 
cleaner onto the right end of the transfer charger, gently slide 
the cleaner to the left end, and then remove it. Repeat this 
operation two or three times.
4
Return the charger cleaner 
to its original position. 
Close the side cover by 
pressing the round 
projections near the side 
cover open button.
5
Turn the power switch on. (p.12)
Slide the charger cleaner from the right end to the left end along 
the groove of the transfer charger. If the cleaner is stopped on 
the way, smudges on copies may occur.
Page of 5
Display

Sharp AR-122E (serv.man56) User Manual / Operation Manual ▷ Download

Found More:

AR-122E (serv.man56) Service Manuals

Preview DownloadPagesSize
AR-122E (serv.man3) Service Manual Complete Service Manual 127 6.58 MB
AR-122E (serv.man4) Cover Service Manual 8 230.86 KB
AR-122E (serv.man5) Sect 14. Circuit Diagram Service Manual 22 1.45 MB
AR-122E (serv.man6) Sect 13. Electrical Section Service Manual 13 292.61 KB
AR-122E (serv.man7) Sect 12. User Programs Service Manual 2 45.43 KB
AR-122E (serv.man8) Sect 11. Maintenance Service Manual 1 71.07 KB
AR-122E (serv.man9) Sect 10. Simulation Trouble Codes Service Manual 17 141.14 KB
AR-122E (serv.man10) Sect 9. Adjustments Service Manual 7 205.7 KB
AR-122E (serv.man11) Sect 8. Disassembly Assembly Service Manual 30 3.22 MB
AR-122E (serv.man12) Sect 7. Operational Description Service Manual 8 368.96 KB
AR-122E (serv.man13) Sect 6. Copy Process Service Manual 4 110.86 KB
AR-122E (serv.man14) Sect 5. Unpacking Installation Service Manual 4 437.47 KB
AR-122E (serv.man15) Sect 4. External Views Internal Structures Service Manual 7 377.88 KB
AR-122E (serv.man16) Sect 3. Consumable Parts Service Manual 3 118.21 KB
AR-122E (serv.man17) Sect 2. Specifications Service Manual 3 59 KB
AR-122E (serv.man18) General Service Manual 1 138.91 KB
AR-122EN (serv.man2) Please also refer to AR122E) Service Manual 18 904.3 KB
AR-122E (serv.man52) Online Manual User Manual / Operation Manual 36 2.47 MB
AR-122E (serv.man53) Sect. 8 Appendix User Manual / Operation Manual 3 70.72 KB
AR-122E (serv.man54) Sect. 7 Optional Equipment (AL-12PKM) User Manual / Operation Manual 29 537.19 KB
AR-122E (serv.man55) Sect. 6 Troubleshooting User Manual / Operation Manual 6 176.85 KB
AR-122E (serv.man57) Sect. 4 Special Functions User Manual / Operation Manual 3 101.03 KB
AR-122E (serv.man58) Sect. 3 Making Copies User Manual / Operation Manual 7 223.18 KB
AR-122E (serv.man59) Sect. 2 Loading the Paper User Manual / Operation Manual 4 118.46 KB
AR-122E (serv.man60) Sect.1 Introduction User Manual / Operation Manual 3 136.19 KB
AR-122E (serv.man61) Contents User Manual / Operation Manual 5 133.68 KB
AR-122EN (serv.man9) Please see AR122E Operation Manual User Manual / Operation Manual 5 133.68 KB
AR-122E (serv.man87) Win2K GDI Driver (v2.8A.006)with WHQL Drivers 772.21 KB
AR-122E (serv.man88) WinXP GDI Driver (v2.8A.006)with WHQL Drivers 772.21 KB
AR-122E (serv.man89) WinNT4.0 GDI Driver (v2.8A.006) Drivers 802.74 KB
AR-122E (serv.man90) WinMe GDI Driver (v2.8A.006) Drivers 858.18 KB
AR-122E (serv.man91) Win9X GDI Driver (v2.8A.006) Drivers 889.6 KB
AR-122EN (serv.man28) Win2K GDI Driver (v2.8A.006)with WHQL Drivers 772.21 KB
AR-122EN (serv.man29) WinXP GDI Driver (v2.8A.006)with WHQL Drivers 772.21 KB
AR-122EN (serv.man30) WinNT4.0 GDI Driver (v2.8A.006) Drivers 802.74 KB
AR-122EN (serv.man31) WinMe GDI Driver (v2.8A.006) Drivers 858.18 KB
AR-122EN (serv.man32) Win9X GDI Driver (v2.8A.006) Drivers 889.6 KB
AR-122E (serv.man93) AR122E Driver for Windows Vista. Windows Vista Drivers 6.45 MB
AR-122EN (serv.man33) AR122E Driver for Windows Vista Drivers 6.45 MB
AR-122E (serv.man19) Information of parts change Service Manual / Parts Guide 2 28.25 KB
AR-122E (serv.man20) Information of parts change. Service Manual / Parts Guide 4 30.17 KB
AR-122E (serv.man21) Strength increase of the turn over gate to prevent breakage. Service Manual / Parts Guide 3 58.91 KB
AR-122E (serv.man22) Information of parts change To improve productivity, the L pulley has been changed. Service Manual / Parts Guide 2 20.3 KB
AR-122E (serv.man23) Parts Change 250 sheet tray. Service Manual / Parts Guide 2 22.68 KB
AR-122E (serv.man24) Parts Guide Complete Service Manual / Parts Guide 44 1.62 MB
AR-122E (serv.man25) Back Cover Service Manual / Parts Guide 2 29.38 KB
AR-122E (serv.man26) Index Service Manual / Parts Guide 8 94.24 KB
AR-122E (serv.man27) Sect 29 to 31. DC power supply PWB Service Manual / Parts Guide 5 56.36 KB
AR-122E (serv.man28) Sect 28. MCU PWB contd. Service Manual / Parts Guide 2 28.24 KB
AR-122E (serv.man29) Sect 27 28. Operation MCU PWB Service Manual / Parts Guide 1 23.83 KB
AR-122E (serv.man30) Sect 26. Packing materials accessories Service Manual / Parts Guide 1 94.1 KB
AR-122E (serv.man31) Sect 25. 2ND paper feeding unit(AR157E) Service Manual / Parts Guide 1 76.77 KB
AR-122E (serv.man32) Sect 23 24. Harness 2ND frame unit (AR157E) Service Manual / Parts Guide 1 104.01 KB
AR-122E (serv.man33) Sect 22. 250 sheet tray Service Manual / Parts Guide 1 69.36 KB
AR-122E (serv.man34) Sect 20 21. Socket holder TC case unit Service Manual / Parts Guide 1 60.87 KB
AR-122E (serv.man35) Sect 19. Multi manual paper feeding unit Service Manual / Parts Guide 2 102.26 KB
AR-122E (serv.man36) Sect 18. Single manual paper feeding unit Service Manual / Parts Guide 1 66.82 KB
AR-122E (serv.man37) Sect 16 17. Single multi manual paper feeding cover unit Service Manual / Parts Guide 1 41.44 KB
AR-122E (serv.man38) Sect 15. Drive unit Service Manual / Parts Guide 1 81.11 KB
AR-122E (serv.man39) Sect 14. Fusing unit Service Manual / Parts Guide 2 119.2 KB
AR-122E (serv.man40) Sect 13. Base plate unit 2 Service Manual / Parts Guide 1 135.33 KB
AR-122E (serv.man41) Sect 12. Base plate unit 1 Service Manual / Parts Guide 2 139.43 KB
AR-122E (serv.man42) Sect 11. Middle frame Service Manual / Parts Guide 1 109.8 KB
AR-122E (serv.man43) Sect 9 10 LSU Delivery paper guide unit Service Manual / Parts Guide 1 69.28 KB
AR-122E (serv.man44) Sect 8. Optical frame Service Manual / Parts Guide 1 104.17 KB
AR-122E (serv.man45) Sect 7. Side door unit Service Manual / Parts Guide 1 92.84 KB
AR-122E (serv.man46) Sect 6. Operation panel Service Manual / Parts Guide 1 76.72 KB
AR-122E (serv.man47) Sect 5. RSPF SPF pick up unit(AR157E) Service Manual / Parts Guide 1 62.43 KB
AR-122E (serv.man48) Sect 4. RSPF transport unit(AR157E) Service Manual / Parts Guide 1 103 KB
AR-122E (serv.man49) Sect 3. RSPF Exteriors (AR157E) Service Manual / Parts Guide 2 145.65 KB
AR-122E (serv.man50) Sect 1 2 Exteriors Original Cover Unit Service Manual / Parts Guide 2 85.19 KB
AR-122E (serv.man51) Front Cover Contents Service Manual / Parts Guide 1 31.17 KB
AR-122EN (serv.man3) Information of parts change Service Manual / Parts Guide 2 28.25 KB
AR-122EN (serv.man4) Information of parts change. Service Manual / Parts Guide 4 30.17 KB
AR-122EN (serv.man5) Strength increase of the turn over gate to prevent breakage. Service Manual / Parts Guide 3 58.91 KB
AR-122EN (serv.man6) Information of parts change To improve productivity, the L pulley has been changed. Service Manual / Parts Guide 2 20.3 KB
AR-122EN (serv.man7) Parts Change 250 sheet tray. Service Manual / Parts Guide 2 22.68 KB
AR-122EN (serv.man8) Parts listing Service Manual / Parts Guide 18 904.3 KB
AR-122E (serv.man2) Specifications Service Manual / Specification 3 59 KB
AR-122EN Information of parts guide, OC gasket. Service Manual / Specification 2 294.08 KB
AR-122E (serv.man64) Starting Powder List (This list takes priority over information in Service Manuals). Service Manual / Technical Bulletin 4 66.25 KB
AR-122E (serv.man65) Change in material of turn plate sheet. Service Manual / Technical Bulletin 3 57.76 KB
AR-122E (serv.man66) Manual paper feed roller material change. Service Manual / Technical Bulletin 5 342.3 KB
AR-122E (serv.man67) Parts Changes. Service Manual / Technical Bulletin 2 29.35 KB
AR-122E (serv.man68) Countermeasures against toner scattering in the process unit section. Service Manual / Technical Bulletin 2 62.83 KB
AR-122E (serv.man69) Improvement of the scanner's dust-proof property Service Manual / Technical Bulletin 6 558.43 KB
AR-122E (serv.man70) Supply of the upper heat roller for preventing toner adhesion, as a service part. Service Manual / Technical Bulletin 2 40.18 KB
AR-122E (serv.man71) Change of operation pwb to comply with RoHS. Service Manual / Technical Bulletin 4 98.25 KB
AR-122E (serv.man72) 1. Main motor change, 2 - AC power cord change. Service Manual / Technical Bulletin 3 100.5 KB
AR-122E (serv.man73) 1. Standardising the the MC harness unit, 2. Changing the CD-ROM, 3. Changing the screws to comply with RoHS. Service Manual / Technical Bulletin 6 1.08 MB
AR-122E (serv.man74) 1. Changing the MCU PWB, 2. Changing the shafts to comply with RoHS, 3. Changing the LSU unit to comply with RoHS, 4. Changing ht erollers to comply with RoHS Service Manual / Technical Bulletin 9 403.35 KB
AR-122E (serv.man75) MCU PWB part change info Service Manual / Technical Bulletin 3 79.55 KB
AR-122E (serv.man76) ROM version upgrade...v3.11 Service Manual / Technical Bulletin 1 7.03 KB
AR-122E (serv.man77) Information of parts change, 1 Transport belt change, 2 MFD sensor PWB change, 3 Transport clutch change, 4 DV bearing change, 5 Standardisation of separator pawl, 6 POD PPD1 sensor PWB change. Service Manual / Technical Bulletin 6 342.13 KB
AR-122E (serv.man78) 1. Rear cover change, 2. Scanner motor change, 3. Shape change of the U-turn guide lower Service Manual / Technical Bulletin 3 68.51 KB
AR-122E (serv.man79) Information of parts change. DV Box Unit and Base Tray R. Service Manual / Technical Bulletin 1 10.78 KB
AR-122E (serv.man80) 1 Changing the 250-sheet casstte pawls F and R to cmply with RoHS, 2 Changing the SPF and the RSPF hinges to comply with RoHS. 3 Changing the DMX roller to comply with RoHS. Service Manual / Technical Bulletin 4 107.58 KB
AR-122E (serv.man81) 1 Changing the PPD2 sensor PWB to comply with RoHS. 2 Changing the SPF sensor PWB to comply with RoHS. Service Manual / Technical Bulletin 2 46.22 KB
AR-122E (serv.man82) 1 Standardising the roller r (pick up roler) in the manual paper feeding section. 2 Changing to lead-free operation PWB and IF PWB. 3 Changing the high voltage PWB to comply with RoHS. Service Manual / Technical Bulletin 3 68.66 KB
AR-122E (serv.man83) Information of parts change, OC gasket. Service Manual / Technical Bulletin 2 294.08 KB
AR-122E (serv.man84) 003-Information of parts change. Service Manual / Technical Bulletin 1 81.36 KB
AR-122E (serv.man85) Supply of component parts list for the DV Units Service Manual / Technical Bulletin 2 158.49 KB
AR-122E (serv.man86) Countermeasure against noise when operating the machine Service Manual / Technical Bulletin 2 549.45 KB
AR-122EN (serv.man11) Starting Powder List (This list takes priority over information in Service Manuals). Service Manual / Technical Bulletin 4 66.25 KB
AR-122EN (serv.man12) Change in material of turn plate sheet. Service Manual / Technical Bulletin 3 57.76 KB
AR-122EN (serv.man13) Manual paper feed roller material change. Service Manual / Technical Bulletin 5 342.3 KB
AR-122EN (serv.man14) Parts Changes. Service Manual / Technical Bulletin 2 29.35 KB
AR-122EN (serv.man15) Countermeasures against toner scattering in the process unit section. Service Manual / Technical Bulletin 2 62.83 KB
AR-122EN (serv.man16) Improvement of the scanner's dust-proof property Service Manual / Technical Bulletin 6 558.43 KB
AR-122EN (serv.man17) Supply of the upper heat roller for preventing toner adhesion, as a service part. Service Manual / Technical Bulletin 2 40.18 KB
AR-122EN (serv.man18) Change of operation pwb to comply with RoHS. Service Manual / Technical Bulletin 4 98.25 KB
AR-122EN (serv.man19) 1. Main motor change, 2 - AC power cord change. Service Manual / Technical Bulletin 3 100.5 KB
AR-122EN (serv.man20) 1. Standardising the the MC harness unit, 2. Changing the CD-ROM, 3. Changing the screws to comply with RoHS. Service Manual / Technical Bulletin 6 1.08 MB
AR-122EN (serv.man21) 1. Changing the MCU PWB, 2. Changing the shafts to comply with RoHS, 3. Changing the LSU unit to comply with RoHS, 4. Changing ht erollers to comply with RoHS Service Manual / Technical Bulletin 9 403.34 KB
AR-122EN (serv.man22) ROM version upgrade...v3.11 Service Manual / Technical Bulletin 1 7.04 KB
AR-122EN (serv.man23) Information of parts change. DV Box Unit and Base Tray R. Service Manual / Technical Bulletin 1 10.78 KB
AR-122EN (serv.man24) 1 Changing the 250-sheet casstte pawls F and R to cmply with RoHS, 2 Changing the SPF and the RSPF hinges to comply with RoHS. 3 Changing the DMX roller to comply with RoHS. Service Manual / Technical Bulletin 4 107.58 KB
AR-122EN (serv.man25) 1 Changing the PPD2 sensor PWB to comply with RoHS. 2 Changing the SPF sensor PWB to comply with RoHS. Service Manual / Technical Bulletin 2 46.22 KB
AR-122EN (serv.man26) 1 Standardising the roller r (pick up roler) in the manual paper feeding section. 2 Changing to lead-free operation PWB and IF PWB. 3 Changing the high voltage PWB to comply with RoHS. Service Manual / Technical Bulletin 3 68.66 KB
AR-122EN (serv.man27) 001-Information of parts change. Service Manual / Technical Bulletin 1 81.36 KB
AR-122E (serv.man62) ROM version upgrade v3.11..to prevent L1-00 F5-02 Driver / Update 147.61 KB
AR-122E (serv.man63) MFP Driver -Win9x,Me,NT,2K XP Driver / Update 10.01 MB
AR-122EN (serv.man10) ROM version upgrade v3.11..to prevent L1-00 F5-02 Driver / Update 147.61 KB
AR-122E (serv.man92) Readme for Installation Driver / Update 353 B
AR-122E Handy Guide A122E N 152E N Handy Guide 22 265.56 KB

RANDOM: