Sharp AL-2060 (serv.man2) Service Manual ▷ View online
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 10
14) Remove the pulleys on the both sides and remove the paper
exit roller. (AL-2020/2035/2040)
15) Disengage the pawl, and remove the roller knob.
16) Disengage the pawl, and shift the pulley and the bearing.
17) Remove the paper exit roller, and remove the belt, the pulley,
and the bearing.
18) Remove the harness guide.
19) Remove two screws and remove the toner motor.
20) Remove three screws, and remove the DUP motor unit and the
belt.
4)
2)
1)
3)
1)
2)
3)
4)
1)
2)
1)
2)
1)
1)
2)
3)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 11
21) Remove five screws and the grounding wire, and remove the
main drive unit.
22) Remove the parts as shown below, and remove the pressure
release solenoid and the paper feed solenoid.
23) Remove four screws, and remove the paper guide unit.
(AL-2020/2035/2040)
24) Remove four screws, and remove the lower paper guide unit.
(AL-2050/2060)
[Note for installation]
Fit the lower paper guide hole (a) with the shifter gear hole (b)
so that the black resin (c) of the shifter unit can be checked.
so that the black resin (c) of the shifter unit can be checked.
1)
2)
1)
1)
1)
CAUTION:Attach the gears securely
3)
3)
1)
1)
2)
2)
4)
4)
2)
1)
1)
1)
1)
1)
1)
1)
2)
a
b
c
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 12
25) Put the lower paper guide unit upside down, remove two
screws, and remove the shifter motor. (AL-2050/2060)
26) Remove the screw, and remove the grounding plate and the
gear. (AL-2050/2060)
27) Remove the E-ring, the gear, and the bearing, and remove the
shifter roller. (AL-2050/2060)
28) Disengage the pawl, and remove the pulley.
29) Shift and remove the shifter unit. (AL-2050/2060)
30) Remove four screws, and remove the LSU unit.
[Note for assembling the LSU]
When installing the LSU, turn the LSU clockwise and fix with
screws in order to provide an attachment backlash in the proper
direction.
screws in order to provide an attachment backlash in the proper
direction.
Observe the following sequence of fixing screws.
1)
2)
1)
2)
3)
1)
2)
3)
3)
4)
1)
1)
1)
2)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 13
31) Remove the screw, slide the left cabinet to the left to detach it.
Remove each pawl, and remove the paper exit tray.
32) Remove two screws and remove the fusing connector.
33) Remove five screws and the connector, and lift the intermediate
frame unit to remove.
34) Remove the screw and the E-ring, and remove the PS semi-cir-
cular earth plate and the PS roller unit.
35) Remove the E-ring and remove the spring clutch from the PS
roller unit.
36) Remove three screws and remove the TC front paper guide.
5)
1)
2)
3)
4)
2)
2)
3)
4)
1)
5)
4)
4)
1)
2)
3)
PS roller unit
PS semi-circuler
earth plate
5)
4)
4)
1)
2)
3)
PS semi-circular
earth plate
earth plate
Use grease of
Floil FG40H
only to apply to
this section.
Floil FG40H
only to apply to
this section.
1)
2)
Click on the first or last page to see other AL-2060 (serv.man2) service manuals if exist.