Sharp AL-1622 (serv.man20) Service Manual ▷ View online
AL-1611/AL-1622
GENERAL
1 – 1
[ 1 ] GENERAL
1. GENERAL
This model is a digital personal copier produced with key words of
"Comfort able copy, Clear copy, Easy copy" providing high copy perfor-
mances and copy productivity.
mances and copy productivity.
2. TARGET USER COPY VOLUME: MONTHLY
AVERAGE
2000~3000 sheets
3. MAIN FEATURES
A. HIGH-SPEED LASER COPYING
• First-copy time is only 7.4 seconds (normal mode).
• Copying speed is 16 copies/min., which adapts to business use,
allowing improvement of working efficiency.
B. HIGH-QUALITY DIGITAL IMAGE
• High-quality copying at 600 dpi is performed.
• In addition to the automatic exposure mode, the manual exposure
can be adjusted in five steps.
• The photo mode copying function allows clear copying of delicate
halftone original images such as monochrome photos and color pho-
tos. Photo mode is adjustable in five steps.
C. SUBSTANTIAL COPYING FEATURES
• Zoom copying from 50% to 200% in 1% increments can be per-
formed.
• Continuous copying of maximum 99 sheets can also be performed.
• Toner save mode reduces toner consumption by approximately 10%.
• User programs allow setting/modification of functions for customer
needs.
D. SCAN ONCE/ PRINT MANY
• The copier is equipped with a 1-page memory buffer. This memory
allows the copier to scan an original 1 time only and make up to 99
copies. This feature allows for improved workflow, reduced operating
copies. This feature allows for improved workflow, reduced operating
noise from the copier and reduced wear and tear on the scanning
mechanism, which provides for a higher reliability.
E. ENVIRONMENTALLY FRIENDLY DESIGN
• Paper output tray is housed in the copier for space saving.
• Preheat mode and auto power shut-off mode are provided to reduce
power consumption in standby mode.
4. COPIER INSTALLATION
Do not install your copier in areas that are:
• damp, humid, or very dusty
• exposed to direct sunlight
• poorly ventilated
• subject to extreme temperature or humidity changes, e.g., near an air
conditioner or heater.
• Be sure to allow the required space around the machine for servicing
and proper ventilation.
4" (10 cm)
AL-1611/AL-1622
SPECIFICATIONS
2 – 1
[ 2 ] SPECIFICATIONS
1. COPY MODE
A. Type
B. Machine composition
C. Copy speed
(1) Scan One Print many
(2) Continuous copy speed (Sheets/min)
D. First copy time
(1) Basic speed
E. Document
(1) SPF (AL-1622 only)
F. Paper feed
(1) Paper feed section of the copier
(2) Manual paper feed section
G. Job speed
Condition: With SPF
H. Multi copy
I. Warmup time
*
May vary depending on the surrounding temperature
Type
Desk-top
AR-1611
16-CPM standard model
AR-1622
16-CPM (with SPF)
Not available
Condition: Copy speed in the normal copy from all the paper feed ports
including the manual paper feed port.
Paper size
Normal
Enlargement
(200%)
Reduction
(50%)
AB
system
A3
9
9
9
B4
10
10
10
A4
16
16
14
A4R
12
12
12
B5
16
16
16
First copy time
7.2sec (A4, 1st tray/with OC)
Max.
document size
document size
A3
Document
reference position
reference position
Left side center
Detection (Platen) AR-1611
None
AR-1622
Available
Detection size
A3, B4, A4, A4R, B5, B5R, A5
Document load
capacity
capacity
30 sheets (56 ~ 90g/m
2
equivalent)
Document
size (Max. ~ Min.)
size (Max. ~ Min.)
A3 ~ A5
Document
replacement
speed
replacement
speed
16 sheets/min (A4 normal copy)
Document set
/Paper feed direc-
tion
/Paper feed direc-
tion
Face up, Center reference, Paper feed from the
top
top
Document weight
56 ~ 90g/m
2
Document size
detection
detection
On the document feed tray
Document mixture Copy mode: Not Available
Copy size
(Max. ~ Min.)
(Max. ~ Min.)
A3 ~ A6
Paper feed
system
system
AR-1611
1 cassette + Multi manual paper
feed
feed
AR-1622
2 cassette + Multi manual paper
feed
feed
Paper feed
capacity
capacity
AR-1611
250 x 1(paper feed tray) + 100
(Multi bypass feed tray)
(Multi bypass feed tray)
AR-1622
250 x 2(Paper feed tray) + 100
(Multi bypass feed tray)
(Multi bypass feed tray)
Remaining
quantity detection
quantity detection
Cassette
section
section
Empty detection available, size
detection by key input
detection by key input
Manual tray
Only empty detection available
Paper feed size
A3, B4, A4, A4R, B5, B5R, A5
(For A5 only No. 1 tray available.)
(For A5 only No. 1 tray available.)
Side front
Front
Paper feed
capacity
capacity
250 sheets (56 ~ 80g/m
2
equivalent)
Detection
Paper empty detection available, size detection
(by key input)
(by key input)
Weight
56 ~ 80g/m
2
Special paper
Recycled paper
Paper feed size
A3 ~ A6
Paper feed
capacity
capacity
100 sheets
Detection
Size detection not available, paper empty detec-
tion available
tion available
Weight
56 ~ 128g/m
2
Special paper
Recycled paper, OHP film, labels
Paper feed
Single except for recycled paper
S-S (1st step)
100% (document replacement rate)
Max. number of
multi copy
multi copy
99 sheets
Warmup time
Approx. 35 sec
*
Pre-heat
Available
AL-1611/AL-1622
SPECIFICATIONS
2 – 2
J. Copy magnification ratio
K. Print density
L. Void width
M. Paper exit/finishing
N. Additional functions
F
: Available
×
: Not available
*
: By the document size set key
O. Other specifications
P. Package form
Q. External view
R. Power source
S. Power consumption
*
EnergyStar standard (The 2nd level conformity)
T. Digital performance
Fixed magnification ratio
50, 70, 81, 86, 100, 115, 122, 141, 200%
Zooming
50 ~ 200%
Independent zooming
(vertical)
(vertical)
Available (50 ~ 200%)
Independent zooming
(horizontal)
(horizontal)
Available (50 ~ 200%)
Density mode
Auto/Manual/Photo
No. of manual adjustment
5 steps (Manual/Photo)
Toner save mode
Set by the user program
Void area
Lead edge 1 ~ 4mm, rear edge 4mm or less
(Duplex 4mm or less), both sides 4mm or less
(Duplex 4mm or less), both sides 4mm or less
Image loss
Max. 4mm in total of lead edge and rear edge,
max. 4mm in total of right and left edges (Normal
copy)
max. 4mm in total of right and left edges (Normal
copy)
Paper exit section capacity Face down 250 sheets
Job separator
None
Full detection
Available (Job separator upper step)
Offset function
None
Staple function
None
APS
*
F
Available for only AL-1622
×
(AL-1611)
AMS
*
F
(AMS not available by flowing in
during use of SPF)
during use of SPF)
Duplex
×
Document count
×
Sorter
×
Independent zooming
F
Vertical/Horizontal: 50 ~ 200%
1 set 2 copy
F
Enlargement inhibited, inhibited
during the use of SPF
during the use of SPF
Binding margin
×
Edge erase
×
Black-white reversion
F
Whole surface only
2 in 1, 4 in 1
×
Rotation copy
×
Memory copy
F
Pre-heat function
F
Conditions set by the user program
Auto power shut off function
×
Conditions set by the user program
Auto tray switching
F
Available for only AL-1622
×
(AL-1611)
Message display
×
User program
F
Total counter
F
Photoconductor
type
type
OPC (Organic Photo Conductor)
Photoconductor
drum dia.
drum dia.
30mm
Copy lamp
Xenon lamp
Developing
system
system
Dry 2-component magnetic brush development
Charging system
Saw teeth charging
Transfer system
(+) DC corotron
Separation
system
system
(
−
) DC corotron
Fusing system
Heat roller
Cleaning system
Contact blade
Body
Body/Accessaries
E x tern al d im e n -
sions (W
sions (W
×
D
×
H)
590
×
531
×
470mm (AL-1611)
590
×
531
×
650mm (AL-1622)
Occupying area
(W
(W
×
D)
590
×
531mm (When the manual tray is installed.)
Weight
About 32kg (AL-1611)
About 40kg (AL-1622)
About 40kg (AL-1622)
Voltage
AC120V, 220V, 230V, 240V
±
15%
Frequency
50/60Hz common
Max. power
consumption
consumption
About 1.3KWh
Pre-heat
About 60Wh
Auto power shut
off
off
0wh.
Resolution
Reading
400 dpi
Writing
600 dpi
Gradation
Reading
256 gradations
Writing
Binary
AL-1611/AL-1622
CONSUMABLE PARTS
3 – 1
[ 3 ] CONSUMABLE PARTS
1. SUPPLY SYSTEM TABLE
A. Europe
Note: Maintenance parts other than mentioned above must be ordered through the parts department using the proper part number.
2. ENVIRONMENT CONDITIONS
A. Transport condition
(1) Transport conditions
(2) Storage conditions (packed conditions)
B. Use conditions
C. Life (packed conditions)
Photoconductor drum (36 months from the production month)
Developer, toner (24 months from the production month)
No.
Name
Content
Life
Product name
Package
Remark
1
Developer cartridge (Black)
Toner/developer cartridge
×
1
Toner: Net
weight
300g
Developer: Net weight 395g
Vinyl bag
×
1
9K
AL-161TD
4
Life setting by A4 5%
documents
documents
2
Drum cartridge
Drum cartridge
30K
AL-160DR
4
Temperature
Humidity (%)
Temperature
Humidity (%)
Humidity (%)
Temperature
Use envi-
ronment
conditions
ronment
conditions
