Sharp AL-1622 (serv.man11) Service Manual ▷ View online
AL-1611/AL-1622
SIMULATIONS
8 – 9
26
50
Black-white reversion func-
tion setup
tion setup
The current setup of black-white reversion is displayed with the following num-
bers. After entering the set value, press the start key to store the set value.
bers. After entering the set value, press the start key to store the set value.
0
0 ~ 1
51
Sort/Group copy temporary
stop function setup
stop function setup
<Not Used>
Used to set whether temporary stop for every 250-sheet print (150-sheet print
when the job separator is installed) is made or not during copying with the
sort/group function. The current setup is displayed with the following numbers.
After entering the set value, press the start key to store the set value.
when the job separator is installed) is made or not during copying with the
sort/group function. The current setup is displayed with the following numbers.
After entering the set value, press the start key to store the set value.
1
0 ~ 1
30
1
Machine sensor operation
check
check
Used to check the sensors in the machine transport system with LED on the
operation panel.
operation panel.
41
2
OC document sensor adjust-
ment
<Not Used>
ment
<Not Used>
Used to read the document sensor input value with paper and perform the
sensor detection level adjustment. For the adjustment procedure of the docu-
ment sensor input value, refer to the previous descriptions.
sensor detection level adjustment. For the adjustment procedure of the docu-
ment sensor input value, refer to the previous descriptions.
3
Document sensor light
reception level display
reception level display
<Not Used>
Used to display the light reception level and the detection level of the docu-
ment sensor. (The sensor level adjusted with SIM 41-2 is displayed.)
ment sensor. (The sensor level adjusted with SIM 41-2 is displayed.)
42
1
Developing counter clear
Used to clear the Developing counter.
*
2
43
1
Fusing temperature setting
Used to display the current setting of the fusing temperature at right. After
selecting the fusing temperature with the magnification ratio display key, press
the start key, and the set value is stored. The set range is 155 ~ 180°C. Use
the magnification ratio key to adjust the value by 5°C.
selecting the fusing temperature with the magnification ratio display key, press
the start key, and the set value is stored. The set range is 155 ~ 180°C. Use
the magnification ratio key to adjust the value by 5°C.
170
155 ~ 180
46
1
Copy density level adjust-
ment
ment
After completion of warmup, shading is performed and the currently set copy
density level is displayed. For the adjustment procedure, refer to the previous
descriptions.
density level is displayed. For the adjustment procedure, refer to the previous
descriptions.
48
1 ~ 99
Main
code
code
Sub
code
Contents
Details of operation
Initial
value
value
Set range
Key operation/Display
0: Black-white reversion function enabled
1: Black-white reversion function disabled
Key operation/Display
0: Does not stop.
1: Stops.
Display
<Lighting at sensor ON>
Paper entry sensor: Machine position JAM LED
Paper exit sensor: JAM LED
Paper exit sensor: JAM LED
No. 2 cassette transport sensor: No. 2 cassette position LED
Key operation
Display
Light reception/Detection
level select: Magnification
ratio display key
level select: Magnification
ratio display key
Sensor select: Auto
magnification ratio select
key
magnification ratio select
key
Display at the 3rd digit
"A": Light reception level display
"b": Document detection level display
Sensor A: A3 (11 x 17) document size LED
Sensor A: A3 (11 x 17) document size LED
Sensor B: A4 (8 1/2 x 14) document size LED
Sensor C: A4R (8 1/2 x 11) document size
LED
Sensor D: B4 (8 1/2 x 5 1/2) document size
LED
LED
Sensor D: B4 (8 1/2 x 5 1/2) document size
LED
Key operation
Fusing temperature select: Magnification ratio display key
Key operation
Display
Mode select:
Exposure mode select key
Exposure mode select key
Copy density level:
Copy quantity keys
Copy quantity keys
<LED lighting at each mode selection>
Auto mode: AUTO LED
Manual mode: MANUAL LED
Manual mode: MANUAL LED
Photo mode: PHOTO LED
Toner save mode: MANUAL + PHOTO LED
AETS mode: AUTO + PHOTO LED
AETS mode: AUTO + PHOTO LED
AL-1611/AL-1622
SIMULATIONS
8 – 10
*
2: Display after clearing each counter
000 (0.75 sec)
3
Blank (0.35 sec)
3
000 (0.75 sec)
3
Blank (1.0 sec)
3
Repetition
48
1
Main scanning (front/rear)
direction magnification ratio
adjustment
(Copy/OC-SPF common)
direction magnification ratio
adjustment
(Copy/OC-SPF common)
After completion of warmup, shading is performed and the currently set main
scanning (front/rear) direction magnification ratio adjustment and the OC
mode document center off adjustment are performed. For the adjustment pro-
cedure, refer to the previous descriptions.
scanning (front/rear) direction magnification ratio adjustment and the OC
mode document center off adjustment are performed. For the adjustment pro-
cedure, refer to the previous descriptions.
55
1 ~ 99
2
OC mode sub scanning
direction magnification ratio
adjustment in copying
direction magnification ratio
adjustment in copying
After completion of warmup, shading is performed and the currently set OC
mode sub scanning direction magnification ratio adjustment in copying is per-
formed. For the adjustment procedure, refer to the previous descriptions.
mode sub scanning direction magnification ratio adjustment in copying is per-
formed. For the adjustment procedure, refer to the previous descriptions.
50
1 ~ 99
5
SPF mode sub scanning
direction magnification ratio
adjustment incopying
direction magnification ratio
adjustment incopying
<Only AL-1622>
After completion of warmup, shading is performed and the currently set SPF
mode sub scanning direction magnification ratio adjustment in copying is per-
formed. For the adjustment procedure, refer to the previous descriptions.
mode sub scanning direction magnification ratio adjustment in copying is per-
formed. For the adjustment procedure, refer to the previous descriptions.
33
1 ~ 99
50
1
Copy image position adjust-
ment
ment
After completion of warmup, shading is performed and the currently set value
is displayed. For the adjustment procedure, refer to the previous descriptions.
is displayed. For the adjustment procedure, refer to the previous descriptions.
55
77
18
48
40
18
18
55
1 ~ 99
10
Paper off center adjustment
After completion of warmup, shading is performed and the currently set off
center adjustment of each paper feed port is displayed. For the adjustment
procedure, refer to the previous descriptions.
center adjustment of each paper feed port is displayed. For the adjustment
procedure, refer to the previous descriptions.
50
1 ~ 99
13
OC mode document off
center adjustment
center adjustment
After completion of warmup, shading is performed and the currently set off
center adjustment value for the document in OC reading is displayed. For the
adjustment procedure, refer to the previous descriptions.
center adjustment value for the document in OC reading is displayed. For the
adjustment procedure, refer to the previous descriptions.
55
1 ~ 99
Main
code
code
Sub
code
Contents
Details of operation
Initial
value
value
Set range
Key operation
Display
Adjustment mode select:
Magnification ratio display
key
Manual main scanning
direction magnification ratio
adjustment Set value: Copy
quantity keys
Magnification ratio display
key
Manual main scanning
direction magnification ratio
adjustment Set value: Copy
quantity keys
Auto magnification ratio adjustment:
AUTO LED
Manual magnification ratio adjustment:
MANUAL LED
OC mode document center off adjustment:
PHOTO LED
Key operation
OC mode sub scanning direction magnification ratio in copying:
Copy quantity keys
Key operation
Display
Adjustment mode select:
Exposure mode select key
Set value:
Copy quantity keys
Auto: SPF mode sub scanning direction
magnification ratio in copying
magnification ratio in copying
Key operation
Display
Adjustment mode
select:
Exposure mode select key
Set value:
Copy quantity keys
Auto: Copy lead edge adjustment
Manual: SPF lead edge adjustment
<Not Used>
<Not Used>
Photo: Main cassette lead edge void
adjustment
adjustment
Auto + Manual: Left edge void adjustment
Auto + Photo: Rear edge void adjustment
Auto + Photo: Rear edge void adjustment
Auto + Manual + Photo: Option cassette
lead edge void adjustment
lead edge void adjustment
Manual + Photo: Multi bypass tray lead
edge void adjustment
Exposure 1: Print start position adjustment
edge void adjustment
Exposure 1: Print start position adjustment
Key operation
Display
Paper feed port tray select:
Tray select key
Off center adjustment value:
numeric keys
Main cassette:
Main cassette select LED
Manual paper feed:
Manual feed select LED
No. 2 cassette:
No. 2 cassette select LED
<Only AL-1622>
<Only AL-1622>
Key operation
Off center adjustment value: Copy quantity keys
AL-1611/AL-1622
SIMULATIONS
8 – 11
Main
code
code
Sub
code
Contents
Details of operation
Initial
value
value
Set range
50
16
SPF mode document off
center adjustment
center adjustment
<Only AL-1622>
After completion of warmup, shading is performed and the currently set off
center adjustment value for the document in SPF reading is displayed. For the
adjustment procedure, refer to the previous descriptions.
center adjustment value for the document in SPF reading is displayed. For the
adjustment procedure, refer to the previous descriptions.
61
1 ~ 99
18
Duplex memory reverse
position adjustment
position adjustment
<Not Used>
After completion of warmup, shading is performed and currently set value is
displayed
displayed
58
1 ~ 99
19
Duplex rear edge void
adjustment
adjustment
<Not Used>
After completion of warmup, shading is performed and currently set value is
displayed.
displayed.
37
52
70
70
1 ~ 99
51
2
Resist amount adjustment
After completion of warmup, shading is performed and the currently set resist
amount adjustment value is displayed.
amount adjustment value is displayed.
50
1
50
1 ~ 99
53
8
SPF scan position auto
adjustment
adjustment
<Only AL-1622>
9
SPF white level value
display
display
<Only AL-1622>
The mirror unit is shifted to the SPF scan position, and the white adjustment
reference level which serves as the reference for white adjustment is dis-
played on the display section for 30 sec.
This simulation must be executed with the SPF cover closed.
reference level which serves as the reference for white adjustment is dis-
played on the display section for 30 sec.
This simulation must be executed with the SPF cover closed.
63
1
Shading data check
The copy lamp is shifted to the shading position and it is lighted with the refer-
ence voltage at AD conversion fixed (Vref- = 0.5V, Vref+ = 4.5V). The level of
one pixel at the center at that time is displayed.
ence voltage at AD conversion fixed (Vref- = 0.5V, Vref+ = 4.5V). The level of
one pixel at the center at that time is displayed.
7
White correction start/pixel
position auto adjustment
position auto adjustment
<Only AL-1622>
64
1
Self print mode
67
14
Printer Flash ROMData
Download
Download
<Not Used>
The machine enters the version up mode of the printer control PWB flash
ROM. For details, refer to the later.
ROM. For details, refer to the later.
Key operation
Off center adjustment value: Copy quantity keys
Key operation
Memory reverse position adjustment value: Copy quantity keys
Key operation
Display
Adjustment mode select:
Exposure mode select key
Set value:
Copy quantity keys
Auto: SPF/R-SPF rear edge void
Manual: R-SPF off center
Photo: R-SPF lead edge void
Photo: R-SPF lead edge void
Key operation
Display
Resist amount adjustment:
Copy quantity keys
Adjustment mode select:
Exposure mode select key
Copy quantity keys
Adjustment mode select:
Exposure mode select key
Auto: Main cassette
Manual: 2nd tray
Photo: Manual feed tray
Manual: 2nd tray
Photo: Manual feed tray
Display
Display section: Shading data
AL-1611/AL-1622
SIMULATIONS
8 – 11
Main
code
code
Sub
code
Contents
Details of operation
Initial
value
value
Set range
50
16
SPF mode document off
center adjustment
center adjustment
<Only AL-1622>
After completion of warmup, shading is performed and the currently set off
center adjustment value for the document in SPF reading is displayed. For the
adjustment procedure, refer to the previous descriptions.
center adjustment value for the document in SPF reading is displayed. For the
adjustment procedure, refer to the previous descriptions.
61
1 ~ 99
18
Duplex memory reverse
position adjustment
position adjustment
<Not Used>
After completion of warmup, shading is performed and currently set value is
displayed
displayed
58
1 ~ 99
19
Duplex rear edge void
adjustment
adjustment
<Not Used>
After completion of warmup, shading is performed and currently set value is
displayed.
displayed.
37
52
70
70
1 ~ 99
51
2
Resist amount adjustment
After completion of warmup, shading is performed and the currently set resist
amount adjustment value is displayed.
amount adjustment value is displayed.
50
1
50
1 ~ 99
53
8
SPF scan position auto
adjustment
adjustment
<Only AL-1622>
9
SPF white level value
display
display
<Only AL-1622>
The mirror unit is shifted to the SPF scan position, and the white adjustment
reference level which serves as the reference for white adjustment is dis-
played on the display section for 30 sec.
This simulation must be executed with the SPF cover closed.
reference level which serves as the reference for white adjustment is dis-
played on the display section for 30 sec.
This simulation must be executed with the SPF cover closed.
63
1
Shading data check
The copy lamp is shifted to the shading position and it is lighted with the refer-
ence voltage at AD conversion fixed (Vref- = 0.5V, Vref+ = 4.5V). The level of
one pixel at the center at that time is displayed.
ence voltage at AD conversion fixed (Vref- = 0.5V, Vref+ = 4.5V). The level of
one pixel at the center at that time is displayed.
7
White correction start/pixel
position auto adjustment
position auto adjustment
<Only AL-1622>
64
1
Self print mode
67
14
Printer Flash ROMData
Download
Download
<Not Used>
The machine enters the version up mode of the printer control PWB flash
ROM. For details, refer to the later.
ROM. For details, refer to the later.
Key operation
Off center adjustment value: Copy quantity keys
Key operation
Memory reverse position adjustment value: Copy quantity keys
Key operation
Display
Adjustment mode select:
Exposure mode select key
Set value:
Copy quantity keys
Auto: SPF/R-SPF rear edge void
Manual: R-SPF off center
Photo: R-SPF lead edge void
Photo: R-SPF lead edge void
Key operation
Display
Resist amount adjustment:
Copy quantity keys
Adjustment mode select:
Exposure mode select key
Copy quantity keys
Adjustment mode select:
Exposure mode select key
Auto: Main cassette
Manual: 2nd tray
Photo: Manual feed tray
Manual: 2nd tray
Photo: Manual feed tray
Display
Display section: Shading data