DOWNLOAD Sharp AL-1611 (serv.man11) Service Manual ↓ Size: 61.76 KB | Pages: 2 in PDF or view online for FREE

Model
AL-1611 (serv.man11)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
61.76 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / User program
File
al-1611-sm11.pdf
Date

Sharp AL-1611 (serv.man11) Service Manual ▷ View online

AL-1611/AL-1622
USER PROGRAM
9 – 1
[ 9 ] USER PROGRAM
The user programs allow the parameters of certain functions to be set, changed, or canceled as desired.
1. LIST OF USER PROGRAMS
This copier has the following user programs.
Program name
Program
No
Description
Default
Parameters
Auto clear time
1
Sets the auto clear time. The copier returns to the initial settings
when the auto clear time elapses after the last copy is made.
60sec
0 (OFF)
1 (30sec)
2 (60sec)
3 (90sec)
4 (120sec)
5 (10sec)
Preheat mode
2
Sets the time that elapses before the copier enters the preheat
mode after any operation is made.
30sec
0 (OFF)
1 (30sec)
2 (60sec)
3 (90sec)
4 (120sec)
Auto power shut-off
timer 
3
Sets the time that elapses before the copier enters the auto power
shut-off mode after any operation is made.
30min
1 (30min)
2 (60min)
3 (90min)
4 (120min)
5 (240min)
Stream feeding mode
*
4
Enables or disables the stream feeding mode when an optional
SPF or RSPF is installed.
OFF
0 (OFF)
1 (ON)
Auto power shut-off 
setting
5
Enables or disables the auto power shut-off mode.
ON
0 (OFF)
1 (ON)
Border line for 2 in 1 or 
4 in 1
*
6
Enables or disables the border line which is printed in 2 in 1 or 4 in
1 copying when an electronic sorting kit and an SPF or RSPF are
installed.
OFF
0 (OFF)
1 (ON)
Rotation copy
*
7
Enables or disables rotation of original images.
ON
0 (OFF)
1 (ON)
Auto paper select mode
8
Enables or disables the auto paper selection.
ON
0 (OFF)
1 (ON)
Auto tray switching
9
Enables or disables the automatic tray switching which occurs
when paper in a tray runs out.  (This switching cannot switch to the
bypass tray.)
ON
0 (OFF)
1 (ON)
Auditing mode
10
Enables or disables the auditing mode, which controls access to
copier.
OFF
0 (OFF)
1 (ON)
Account number entry
11
Registers accounts for auditing mode.
Account number change
12
Changes account numbers for auditing mode.
Account number deletion
13
Deletes accounts for auditing mode.
Number of copies 
per account
14
Displays the total number of copies made against account num-
bers.
Resetting account
15
Resets all audit accounts or resets any desired individual account.
Erase width adjustment
*
16
Sets the amount of the edge erase and center erase areas.
10mm [1/2"]
0 (0mm [0"])
1 (5mm [1/4"])
2 (10mm [1/2"])
3 (15mm [3/4"])
4 (20mm [1"])
Layout in 2 in 1 copy
*
17
Selects a pattern for 2 in 1 copying.
Pattern 1
1 (Pattern 1)
2 (Pattern 2)
Patern A
Patern B
AL-1611/AL-1622
USER PROGRAM
9 – 2
*
These programs do not affect the copier functions unless certain optional equipment is installed.
2. SETTING THE USER PROGRAMS
1) Press and hold the light key for more than 5 seconds until all the
alarm indicators ( 
, and 
) blink and “- -” appears
in the copy quantity display.
2) Enter a program number using the numeric keys.
•  The selected program number will blink in the copy quantity dis-
play.
•  If a mistake is made in steps 2) to 4), press the CLEAR key. The
copier will return to step 2).
For example, to change the setting of the auto power shut-off timer,
press key 3.
3) Press the START key.
•  For programs 1 to 9 and 16 to 19, the entered program number
will be steadily lit on the left side of the copy quantity display and
the currently selected parameter number for the program will
blink on the right side.
•  For programs 10 to 15 (programs for auditing accounts), the dis-
play varies with the program number.
4) Select the desired parameter using the numeric keys.
•  The entered parameter number will blink on the right side of the
copy quantity display.
•  The parameters are shown in the table below.
For example, to change the setting of the auto power shut-off timer to
60 min., press key 2.
**
In European countries, the default setting of the preheat mode is 1
(30 sec.). For other programs, factory-default settings in these
countries are same to those shown above with an asterisk (
*
).
Note: If you select “0” (OFF) in a program, the corresponding function
will be disabled.
5) Press the START key.
•  The right-hand number in the copy quantity display will be
6) To continue with other user programs, press the PRESS key and
then repeat steps 2 to 5. To exit the user program mode, press the
light key.
•  All the alarm indicators will go out.
3. TONER CARTRIDGE LIFE
To find out the approximate quantity of toner remaining, follow the pro-
cedure below.
1) Press and hold the light key for more than 5 seconds until all the
alarm indicators ( 
, and 
) blink and “- -” appears
in the copy quantity display.
2) Press and hold the copy ratio display key for more than 5 seconds.
•  The approximate quantity of toner remaining will be indicated as
a percent in the copy quantity display. (“100”, “75”, “50”, “25”,
“10” or “LO” is displayed. When “LO” is displayed, the toner is
down to less than 10%.)
3) Press the light key.
•  All the alarm indicators will go out.
Layout in 4 in 1 copy
*
18
Selects a pattern for 4 in 1 copying.
Pattern 1
1 (Pattern 1)
2 (Pattern 2)
3 (Pattern 3)
4 (Pattern 4)
Offset of paper 
output tray
*
19
Enables or disables the offset function of the paper output tray. The
offset function can be specified respectively for the upper and lower
areas separated by an optional job separator tray kit.
Upper ON, 
Lower ON
0 (Upper OFF, Lower OFF)
1 (Upper ON, Lower On)
2 (Upper ON, Lower OFF)
3 (Upper OFF, Lower On)
Image rotation in 
duplex copying
*
20
Enables or disables image rotation  (180°) of the front side in one-
sided to two-sided copying or two-sided to one-sided copying.
OFF
0 (OFF)
1 (ON)
Location of the margin
*
22
Selects the location of the expanded margin.
Left
1 (Left)
2 (Top)
Program name
Program
No
Description
Default
Parameters
Patern A
Patern B
Patern C
Patern D
Display

Sharp AL-1611 (serv.man11) Service Manual ▷ Download

  • DOWNLOAD Sharp AL-1611 (serv.man11) Service Manual ↓ Size: 61.76 KB | Pages: 2 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp AL-1611 (serv.man11) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AL-1611 (serv.man11) Copying Equipment. Information contained in Sharp AL-1611 (serv.man11) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.