Sharp AL-1555 (serv.man26) User Manual / Operation Manual ▷ View online
59
7
4
Gently install the TD cartridge. To install the TD cartridge, see
"INSTALLING THE TD CARTRIDGE" (p.10).
"INSTALLING THE TD CARTRIDGE" (p.10).
5
Close the front cover and then the side cover by pressing the
round projections near the side cover open button. The drum
replacement required (
round projections near the side cover open button. The drum
replacement required (
) indicator will go out and the start
(
) indicator will light up.
CLEANING THE UNIT
Proper care is essential in order to get clean, sharp copies. Be sure to take a few
minutes to regularly clean the unit.
minutes to regularly clean the unit.
Cabinet
Wipe the cabinet with a soft, clean cloth.
Original table and the back side of the original cover/SPF/
RSPF
RSPF
Stains on the glass, scanning window (AL-1255/AL-1456/AL-1555), cover or SPF/
RSPF roller will also be copied. Wipe the glass, scanning window, cover and SPF/
RSPF roller with a soft, clean cloth. If necessary, dampen the cloth with a glass
cleaner.
RSPF roller will also be copied. Wipe the glass, scanning window, cover and SPF/
RSPF roller with a soft, clean cloth. If necessary, dampen the cloth with a glass
cleaner.
When closing the covers, be sure to close the front cover securely and
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.
• Before cleaning, be sure to turn the power switch off and remove the
power cord from the outlet.
• Do not use thinner, benzene or other volatile cleaning agents. Doing
so may cause deformation, discoloration, deterioration or malfunction.
Original table/scanning window
Original cover/SPF/RSPF
SPF/RSPF roller
Scanning window
60
Transfer charger
If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean
the charger using the following procedure.
the charger using the following procedure.
1
Turn the power switch off. (p.12)
2
Ensure that the multi-bypass tray is open (AL-1555) and then
open the side cover while pressing the side cover open button.
open the side cover while pressing the side cover open button.
3
Take the charger cleaner out by holding the tab. Set the charger
cleaner onto the right end of the transfer charger, gently slide
the cleaner to the left end, and then remove it. Repeat this
operation two or three times.
cleaner onto the right end of the transfer charger, gently slide
the cleaner to the left end, and then remove it. Repeat this
operation two or three times.
4
Return the charger cleaner
to its original position.
Close the side cover by
pressing the round
projections near the side
cover open button.
to its original position.
Close the side cover by
pressing the round
projections near the side
cover open button.
5
Turn the power switch on. (p.12)
Slide the charger cleaner from the right end to the left end along
the groove of the transfer charger. If the cleaner is stopped on
the way, smudges on copies may occur.
the groove of the transfer charger. If the cleaner is stopped on
the way, smudges on copies may occur.
60
Transfer charger
If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean
the charger using the following procedure.
the charger using the following procedure.
1
Turn the power switch off. (p.12)
2
Ensure that the multi-bypass tray is open (AL-1555) and then
open the side cover while pressing the side cover open button.
open the side cover while pressing the side cover open button.
3
Take the charger cleaner out by holding the tab. Set the charger
cleaner onto the right end of the transfer charger, gently slide
the cleaner to the left end, and then remove it. Repeat this
operation two or three times.
cleaner onto the right end of the transfer charger, gently slide
the cleaner to the left end, and then remove it. Repeat this
operation two or three times.
4
Return the charger cleaner
to its original position.
Close the side cover by
pressing the round
projections near the side
cover open button.
to its original position.
Close the side cover by
pressing the round
projections near the side
cover open button.
5
Turn the power switch on. (p.12)
Slide the charger cleaner from the right end to the left end along
the groove of the transfer charger. If the cleaner is stopped on
the way, smudges on copies may occur.
the groove of the transfer charger. If the cleaner is stopped on
the way, smudges on copies may occur.
60
Transfer charger
If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean
the charger using the following procedure.
the charger using the following procedure.
1
Turn the power switch off. (p.12)
2
Ensure that the multi-bypass tray is open (AL-1555) and then
open the side cover while pressing the side cover open button.
open the side cover while pressing the side cover open button.
3
Take the charger cleaner out by holding the tab. Set the charger
cleaner onto the right end of the transfer charger, gently slide
the cleaner to the left end, and then remove it. Repeat this
operation two or three times.
cleaner onto the right end of the transfer charger, gently slide
the cleaner to the left end, and then remove it. Repeat this
operation two or three times.
4
Return the charger cleaner
to its original position.
Close the side cover by
pressing the round
projections near the side
cover open button.
to its original position.
Close the side cover by
pressing the round
projections near the side
cover open button.
5
Turn the power switch on. (p.12)
Slide the charger cleaner from the right end to the left end along
the groove of the transfer charger. If the cleaner is stopped on
the way, smudges on copies may occur.
the groove of the transfer charger. If the cleaner is stopped on
the way, smudges on copies may occur.
Display