Sharp Electronics (UK) Ltd., Document Systems Support
1. Model Name
When jam occurs in the fusing unit section, the turn over gate is opened to remove the
jammed paper. At that time, if the jammed paper is forcedly removed, the rear side of the turn
over gate may break.
If the turn over gate breaks, jam occurs frequently around the turn over gate.
To increase strength of the turn over gate for breakage prevention, stiffening ribs have been
added to the F and R sides of the turn over gate.
Executed from the middle of production in December, 2006
Strength increase of the turn over gate to prevent
17 September 2007
1 of 3