Sharp AL-1457D (serv.man10) User Manual / Operation Manual ▷ View online
MATERIAL SAFETY DATA SHEET
Page: 3/4
Date Revised: Jul. 31. 2002
Date Issued : Jun. 1. 1998
MSDS No. F-30831
MSDS No. F-30831
9.PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Physical State : Solid
Form : Powder
Color : Black
Odor : odorless
Ph : Not applicable
Boiling / Melting Point
Boiling / Melting Point
: Not applicable
Flash Point(°C)
: Not applicable
lgnition Point(°C )
: No data
Explosion Properties
: No data
Density(g/cm³) : 5.4 (bulk density : 2.09)
Solubility in Water
Solubility in Water
: Negligible
10.STABILITY AND REACTIVITY
Stability : Stable
Hazardous Reactions
Hazardous Reactions
: Dust explosion, like most finely divided organic powders.
Conditions to Avoid
: Electric discharge, throwing into fire.
Materials to Avoid
: Oxidizing Materials
Hazardous Decomposition Products
: CO, CO
2
and NO
X
Further Information
: None
11.TOXICOLOGICAL INFORMATION
Acute Toxicity
Ingestion(oral) :
LD
50
> 2000mg/kg (Rats)
Inhalation :
No
data
Dermal : LD
50
>2000mg/kg(Rats)
Eye irritation
: Not an irritant (Rabbits)
Skin irritation
: Not an irritant (Rabbits)
Skin sensitizer
: No sensitization
Mutagenicity : Negative (Ames Test)
Carcinogenicity : In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human carcinogen).
This classification is given to chemicals for which there is inadequate human evidence, but sufficient
animal evidence on which to base an opinion of carcinogenicity. The classification is based upon the
development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels
that induce particle overload of the lung. Studies performed in animal models other than rats did not
show any association between carbon black and lung tumors. Moreover, a two-year cancer bioassay
using a typical toner preparation containing carbon black demonstrated no association between toner
exposure and tumor development in rats.
animal evidence on which to base an opinion of carcinogenicity. The classification is based upon the
development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels
that induce particle overload of the lung. Studies performed in animal models other than rats did not
show any association between carbon black and lung tumors. Moreover, a two-year cancer bioassay
using a typical toner preparation containing carbon black demonstrated no association between toner
exposure and tumor development in rats.
Chronic Effect
: In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate degree of lung
fibrosis was observed in 92% of the rats in the high concentration (16mg/m
3
) exposure group, and a
minimal to mild degree of fibrosis was noted in 22% of the animals in the middle (4mg/m
3
) exposure
group, but no pulmonary change was reported in the lowest (1mg/m
3
) exposure group, the most relevant
level to potential human exposures.
12.ECOLOGICAL INFORMATION
No data are available.
MATERIAL SAFETY DATA SHEET
Page: 4/4
Date Revised: Jul. 31. 2002
Date Issued : Jun. 1. 1998
MSDS No. F-30831
13.DISPOSAL CONSIDERATIONS
Waste from Residues
: Waste material may be dumped or incinerated under conditions which meet all federal,
state and local environmental regulations.
Contaminated Packaging : Waste may be disposed or incinerated under conditions which meet all federal, state and
local environmental regulations.
14.TRANSPORT INFORMATION
UN Classification
: None
Not classified as hazardous for transport.
15.REGULATORY INFORMATION
US Information
TSCA(Toxic Substances Control Act)
:
All chemical substances in this product comply with all applicable rules or order under TSCA.
SARA(Superfund Amendments and Reauthorization Act) Title III
302 Extreme Hazardous Substance : None
311/312 Hazard Classification
311/312 Hazard Classification
: None
EU Information
1999/45/EC and 67/548/EEC
Symbol & Indication
: Not required
R-Phrase
: Not required
76/769/EEC
: All chemical substances in this product comply with all applicable rules
or order under 76/769/EEC.
or order under 76/769/EEC.
16.OTHER INFORMATION
NFPA Rating (USA)
: Health=1
Flammability=1
Reactivity=0
WHMIS Legislation (Canada)
: This product is not a controlled product.
References
IARC(1996) : IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans, Vol. 65,
Printing Process And Printing Inks, Carbon Black and Some Nitro Compounds, Lyon, pp.149-261
H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie, P.Morrow, U.Mohr,
S.Takenaka, and R.Mermelstein(1991) Pulmonary Response to Toner upon Chronic Inhalation Exposure in Rats.
Fundamental and Applied Toxicology 17, pp.280-299.
S.Takenaka, and R.Mermelstein(1991) Pulmonary Response to Toner upon Chronic Inhalation Exposure in Rats.
Fundamental and Applied Toxicology 17, pp.280-299.
The information on this data sheet represents our current data and best opinion as to the proper use in handling of this
product under normal conditions. However, all materials may present unknown hazards and should be used with caution.
Although certain hazards are described herein, we do not guarantee that these are the only hazards which exist.
The CE mark logo label is affixed on an equipment in case that the directives described in the above sentence are
applicable to the product. (This sentence is not applicable in any country where the above directives are not required.)
applicable to the product. (This sentence is not applicable in any country where the above directives are not required.)
Required in Appendix ZB of BS 7002 (En 60 950) – United Kingdom
MAINS PLUG WIRING INSTRUCTIONS
The mains lead of this equipment is already fitted with a mains plug which is either a non-
rewireable (moulded) or a rewireable type. Should the fuse need to be replaced, a BSI or
ASTA approved fuse to BS1362 marked
rewireable (moulded) or a rewireable type. Should the fuse need to be replaced, a BSI or
ASTA approved fuse to BS1362 marked
or
and of the same rating as the one
removed from the plus must be used.
Always refit the fuse cover after replacing the fuse on the moulded plug. Never use the
plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug
supplied either cut-off the moulded plug (If this type is fitted) or remove by undoing the
screws if a rewireable plug is fitted and fit an appropriate type observing the wiring code
below.
Always refit the fuse cover after replacing the fuse on the moulded plug. Never use the
plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug
supplied either cut-off the moulded plug (If this type is fitted) or remove by undoing the
screws if a rewireable plug is fitted and fit an appropriate type observing the wiring code
below.
DANGER: The fuse should be removed from the cut-off plug and the plug destroyed
immediately and disposed of in a safe manner. Under no circumstances shold the cut-off
plug be inserted elsewhere into a 13A socket outlet as a serious electric shock may occur.
immediately and disposed of in a safe manner. Under no circumstances shold the cut-off
plug be inserted elsewhere into a 13A socket outlet as a serious electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT: The wires in this mains lead are coloured in accordance with the following
code:
IMPORTANT: The wires in this mains lead are coloured in accordance with the following
code:
GREEN-AND-YELLOW:
Earth
BLUE:
Neutral
BROWN:
Live
As the colours of the wires in this mains lead may not correspond with coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in
the plug which is marked with the letter E, or by the safety earth symbol
identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in
the plug which is marked with the letter E, or by the safety earth symbol
, or coloured
green or green-and-yellow.
The wire which is coloured BLUE must be connected to the terminal which is marked with
the letter N or coloured black.
The wire which is coloured BLUE must be connected to the terminal which is marked with
the letter N or coloured black.
Printed in France
TINSE1176TSZZ
SHARP CORPORATION
