DOWNLOAD Sharp AL-1457 (serv.man26) Service Manual ↓ Size: 120.78 KB | Pages: 5 in PDF or view online for FREE

Model
AL-1457 (serv.man26)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
120.78 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / Loading paper
File
al-1457-sm26.pdf
Date

Sharp AL-1457 (serv.man26) User Manual / Operation Manual ▷ View online

14
Follow the steps below to load paper into the tray.
PAPER
For best results, use only paper recommended by SHARP.
* Do not use non-standard envelopes, and envelopes that have metal clasps, plastic 
snappers, string closures, windows, linings, self-adhesive, patches or synthetic 
materials. Do not use envelopes that are filled with air or envelopes that have 
labels or stamps attached. These will cause physical damage to the unit.
** For paper weighing from 104
g
/m
2
 to 128
g
/m
2
, A4  is the maximum size that can be 
fed through the single bypass or the multi-bypass tray.
• Special papers such as transparency film, labels and envelope must be fed one 
sheet at a time through the single bypass or the multi-bypass tray.
Type of paper 
feeding
Type of media
Size
Weight
Paper tray
Standard paper
A4
A5
B5
Letter
Legal
Invoice
56
g
/m
2
 to 
80
g
/m
2
Single bypass/
Multi-bypass 
tray
Standard paper and 
thick paper
A4
A5
A6
B5
B6
Letter**
Legal
Invoice
52
g
/m
2
 to 
128
g
/m
2
**
Special 
media
Transparency 
film
A4
Letter
Envelope*
International DL
International C5
Commercial 10
Monarch
3
LOADING PAPER
15
3
LOADING THE PAPER TRAY
1
Raise the handle of the paper tray 
and pull the paper tray out until it 
stops.
2
Remove the pressure plate lock. Rotate the pressure plate lock 
in the direction of the arrow to remove it while pressing down 
the pressure plate of the paper tray.
3
Store the pressure plate lock which has been removed in step 2. 
To store the pressure plate lock, rotate the lock to fix it on the 
relevant location.
4
Adjust the paper guides on the paper tray to the copy paper 
width and length. Squeeze the lever of paper guide 
 and slide 
the guide to match with the width of the paper. Move paper 
guide 
 to the appropriate slot as marked on the tray.
Pressure plate lock
A
B
Paper 
guide  B
Paper 
guide  A
16
5
Fan the paper and insert it into the tray. Make sure the edges go 
under the corner hooks.
6
Gently push the paper tray back into the unit.
Do not load paper above the maximum height line (
). Exceeding 
the line will cause a paper misfeed.
After loading paper, to cancel the blinking 
 without restarting 
copying, press the clear (
) key. The 
 in the display will go out 
and the start (
) indicator will light up.
Be sure that paper is free of rips, dust, wrinkles, and curled or bent 
edges.
Make sure all the paper in the stack is the same size and type.
When loading paper, ensure there is no space between the paper and 
the guide, and check if the guide is not set too narrow causing the 
paper to bend. Loading paper in these ways will result in document 
skew or a paper jam.
When not using the unit for an extended period, remove all paper from   
the paper tray and store it in a dry place.  If paper is left in the unit for 
an extended period, the paper will absorb moisture from the air, 
resulting in paper jams.
When adding new paper to the paper tray, remove the old paper 
already contained in the tray. Placing new paper on top of the paper 
already contained in the tray may result in feeding two sheets at one 
time.
17
3
BYPASS FEED (including special paper)
The multi-bypass tray (AL-1457) or the single bypass (AL-1217) can be used to feed 
standard paper, transparency film, labels, envelopes, and other special purpose 
paper. Paper measuring from A6 to A4  and in the weight range of 52
g
/m
2
 to 128
g
/
m
2
 can be used in this tray. (For paper weighing from 104
g
/m
2
 to 128
g
/m
2
, A4 is the 
maximum size.)
The multi-bypass tray (AL-1457)
1
Open the multi-bypass tray and extend the tray.
2
Set the paper guides to the paper width. Insert the paper (print 
face down) all the way into the multi-bypass tray.
The multi-bypass tray (AL-1457) can hold maximum of 50 sheets of 
paper. (Capacity will vary depending on the type of paper loaded.) 
The single bypass (AL-1217) can hold one sheet of paper.
The original image must be smaller than the paper or media for 
copying. If the original image is bigger than the paper or media, this 
may cause smudges on the edges of the copies.
To close the multi-
bypass tray, 
perform step 1 
and then step 2 in 
the illustration and 
push the round 
projections at the 
right of the tray 
until they click.
Print face
Page of 5
Display

Sharp AL-1457 (serv.man26) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp AL-1457 (serv.man26) Service Manual ↓ Size: 120.78 KB | Pages: 5 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp AL-1457 (serv.man26) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AL-1457 (serv.man26) Copying Equipment. Information contained in Sharp AL-1457 (serv.man26) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.