DOWNLOAD Sharp AL-1456 (serv.man5) Service Manual ↓ Size: 336 KB | Pages: 7 in PDF or view online for FREE

Model
AL-1456 (serv.man5)
Pages
7
Size
336 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / External views and internal structures
File
al-1456-sm5.pdf
Date

Sharp AL-1456 (serv.man5) Service Manual ▷ View online

AL-1555 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 1
[4] EXTERNAL VIEWS AND INTERNAL STRUCTURES
1. Appearance
*1 SPF only  *2 RSPF only
2. Internal
1
Original cover
2
Side cover
3
Bypass tray
4
Bypass tray guides
5
Side cover open button
6
Front cover
7
Paper tray
8
Operation panel
9
Original table
10
Document feeder tray
11
SPF exit area *1 / RSPF exit area *2
12
Original guides
13
Feeding roller cover
14
USB interface
15
Parallel interface
16
Paper output tray
17
Paper output tray extension
18
Power switch
19
Handle
20
Power cord
Interface
SPF/RSPF
8
6
7
9
11
12
13
10
2
1
14
15
4
3
5
16
17
18
19
20
Single bypass
4
1
TD cartridge lock release button
2
TD cartridge
3
Drum cartridge
4
Drum cartridge handle
5
Fusing unit release lever
6
Charger cleaner
7
Transfer charger
5
7
6
1
2
4
3
AL-1555 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 2
3. Operation panel
*1. Photoreceptor Cartridge Replacement indicator
After making 17,000 copies, the indicator will be “ON”, and after
1,000 copier more are made, the indicator starts blinking and
machine will hard-stop (after current job) until a new cartridge is
installed. End life of photoreceptor cartridge displays 3-digits x 2-
line (total 6-digits) by pressing CLEAR key for five seconds in user
simulation.
*2. Toner Developer Cartridge Replacement
When toner density is lower than a specified level, the TONER
DEVELOPER CARTRIDGE REPLACEMENT indicator lights up to
warn the user. If the Toner Developer Cartridge is not replaced in
that time, the Ready Lamp changes to blinking and then start to
supply the toner after around 10 copies. (Cartridge replacement
lamp continues to light.) If toner density is not back to specific level
after two minutes, the READY indicator goes out and Toner Devel-
oper indicator starts blinking, and the copier stops.
*3. Indicators on the operation panel
The ON LINE indicator and the start (
) indicator indicate the
state of the printer or scanner.
Start indicator
(AL-1555)
A5
A4
A4
B5
A4
A5
141
86
70
1
Duplex Mode select key and indicator
(RSPF only)
2
Exposure mode selector key and indicators
Use to sequentially select the exposure modes: AUTO, MANUAL or 
PHOTO. Selected mode is shown by a lit indicator.
3
Light and dark keys and exposure indicators
Use to adjust the MANUAL or PHOTO exposure level.
Selected exposure level is shown by a lit indicator.
Use to start and terminate user program setting.
4
Alarm indicators
Drum replacement required indicator *1
Misfeed indicator
TD cartridge replacement required indicator *2
5
SPF/RSPF indicator
6
SPF misfeed indicator
7
Copy ratio selector key and copy ratio indicators
Use to sequentially select preset reduction/enlargement copy ratios.
Selected copy ratio is shown by a lit indicator.
8
Copy ratio display (%) key
9
Display
Displays the specified copy quantity, zoom copy ratio, user program 
code, and error code.
10 SCANNER key and indicator *3, *4
11 ON LINE key / indicator
Lights up when the machine is used as a printer and scanner. *3
12 Power save indicator
Lights up when the copier is in a power save mode.
13 Paper feed location indicators
Light up to show the selected paper feed station.
14 Tray select key
Use to select a paper feed station (paper tray or bypass tray).
15 Zoom keys / indicator
Use to select any reduction or enlargement copy ratio from 25% to 
400% in 1% increments.
16 Copy quantity keys
• Use to select the desired copy quantity (1 to 99).
• Use to make user program entries.
17 Clear key
• Press to clear the display, or press during a copy run to terminate
copying.
• Press and hold down during standby to display the total number of
copies made to date.
18 Print key and ready indicator
• Copying is possible when the indicator is on.
• Use to set a user program.
• Press to start copying
On:
Indicates the unit is ready for copying or scanning is 
being performed.
Blinking: Indicates that an interrupt print job is in progress, or that 
the unit is initializing (the cover has been opened and 
closed or the power turned off and on).
Off:
Indicates copying or scanning is being performed or the 
unit is in the auto power shut-off mode.
Power save indicator
Start indicator
ON LINE indicator
SCANNER indicator
AL-1555 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 3
ON LINE indicator
The ON LINE key is pressed and on line and off line are changed.
Power save indicator
Scanner indicator
*4. Using the SCANNER key to begin scanning
This scanning method can only be used if the Button Manager has
been installed using the installer. To scan using this method, you
must first complete the settings in Button Manager in your com-
puter. For more information on Button Manager, see the online
manual or the help file for Button Manager.
Note:
• Scanning is not possible during a copy job.
• If the unit is used to begin a scan job during a print job using the
parallel interface connection or the USB interface connection,
the scan job will be stored and scanning will begin when the print
job is completed.
• When scanning an original that has been placed in the SPF/
RSPF, only one original can be placed unless you are using
Sharpdesk. 
1) Press the SCANNER (
) key.
The unit enters scan mode.
2) Place the original you wish to scan on the original table/SPF/
RSPF.
For the procedure for placing the original, see "ORIGINAL
PLACEMENT".
3) Press the right copy quantity key to display the number of the
application that you wish to use for scanning.
The application numbers are initially as follows.
The application numbers are initially as follows.
4) Press the start (
) key.
The selected application launches and scanning begins.
On:
Indicates the unit is ready for printing or scanning is 
being performed. (On line)
Blinking: Printing or data is being received from a computer.
Off:
Copying is being performed. (Off line)
On:
Indicates the unit is in a power save mode.
On:
The SCANNER (
) key has been pressed and the unit 
is in scanner mode.
Blinking: A scan job is being executed from the computer, or scan 
data is stored in the unit's memory.
Off:
The unit is in the copy mode.
Application 
number
Application launched
SC1
Sharpdesk (if installed)
SC2
E-mail (your standard e-mail program in the 
Windows OS you are using)
SC3
Fax (if a fax program is installed)
SC4
OCR (if an OCR program is installed)
SC5
Microsoft Word (if installed)
SC6
Any application set in Button Manager
AL-1555 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 4
4. Motors and solenoids
3
9
2
13
8
12
10
4
1
5
7
11
6
No.
Part name
Control signal
Function / Operation
1
Main motor
MM
Drives the copier.
2
Scanner motor
MRMT
Drives the optical mirror base (scanner unit).
3
Toner motor
TM
Supplies toner.
4
Cooling fan motor
VFM
Cools the optical section.
5
Resist roller solenoid
RRS
Resist roller rotation control solenoid
6
Paper feed solenoid
CPFS1
Cassette Paper feed solenoid 1
7
Multi paper feed solenoid
MPFS
Multi manual pages feed solenoid 
8
SPF motor
SPFM
Drives the single pass feeder
9
Duplex motor
DMT
Devices the duplex paper transport section
10
Original feed solenoid
SPUS
Original feed solenoid
11
Paper feed solenoid
CPFS2
Cassette Paper feed solenoid 2
12
SRRC
Original resist roller solenoid
13
SPFS
Original paper feed solenoid
Page of 7
Display

Sharp AL-1456 (serv.man5) Service Manual ▷ Download

  • DOWNLOAD Sharp AL-1456 (serv.man5) Service Manual ↓ Size: 336 KB | Pages: 7 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp AL-1456 (serv.man5) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AL-1456 (serv.man5) Copying Equipment. Information contained in Sharp AL-1456 (serv.man5) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.