DOWNLOAD Sharp AL-1217 (serv.man23) Service Manual ↓ Size: 272.13 KB | Pages: 7 in PDF or view online for FREE

Model
AL-1217 (serv.man23)
Pages
7
Size
272.13 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / Setting up the unit
File
al-1217-sm23.pdf
Date

Sharp AL-1217 (serv.man23) User Manual / Operation Manual ▷ View online

12
CONNECTING THE POWER CORD
1
Ensure that the power switch of 
the unit is in the OFF position. 
Insert the attached power cord 
into the power cord socket at the 
rear of the unit.
2
Plug the other end of the power cord into the nearest outlet.
Power on
Ensure that the power switch of the unit is in the OFF position. Plug the other end of 
the power cord into the nearest outlet. Turn the power switch on the left side of the 
unit to the "ON" position. The start (
) indicator will light up and other indicators 
which show the initial settings of the operation panel will also light up to indicate the 
ready condition. For the initial settings, see the "Initial settings of operation panel" 
described on the next page.
If you use the unit in a country other than the country where the unit was 
purchased, you will need to make sure that your local power supply is 
compatible with your model. If you plug the unit into an incompatible 
power supply, irreparable damage to the unit will result.
Only insert the power cord into a properly grounded wall socket.
Do not use extension cords or power strips.
The unit will enter a power save mode once the set time has elapsed 
without any unit operation. The settings of the power save modes can 
be modified. See "USER PROGRAMS" (p.53).
The unit will return to the initial settings a preset amount of time after 
the end of copy or scanner job. The preset amount of time (auto clear 
time) can be changed. See "USER PROGRAMS" (p.53).
13
2
About the scan head
The scan head lamp remains on constantly when the unit is in the ready condition 
(when the start (
) indicator is illuminated).
The unit adjusts the scan head lamp periodically to maintain copying quality. At this 
time, the scan head moves automatically. This is normal and does not indicate unit 
trouble.
Initial settings of operation panel
When the unit power is on, the operation panel will revert to the initial settings when 
the time set with the "Auto clear time" setting (p.53) elapses after a copy or scanner 
job is finished, or when the clear (
) key is pressed twice.
The initial settings of the operation panel are shown below.
When copying is begun in this state, the settings in the following table are used.
Power off methods
If not used for a certain period of time, the unit will automatically enter auto power 
shut-off mode (p.53) in order to minimise power consumption. In cases where the 
machine will not be used for a long time, turn off the power switch and remove the 
power cord from the outlet.
Copy quantity
1 copy
Exposure adjustment
AUTO
Zoom
100%
Tray
Paper tray
AL-1457
"0" is displayed in the display.
13
2
About the scan head
The scan head lamp remains on constantly when the unit is in the ready condition 
(when the start (
) indicator is illuminated).
The unit adjusts the scan head lamp periodically to maintain copying quality. At this 
time, the scan head moves automatically. This is normal and does not indicate unit 
trouble.
Initial settings of operation panel
When the unit power is on, the operation panel will revert to the initial settings when 
the time set with the "Auto clear time" setting (p.53) elapses after a copy or scanner 
job is finished, or when the clear (
) key is pressed twice.
The initial settings of the operation panel are shown below.
When copying is begun in this state, the settings in the following table are used.
Power off methods
If not used for a certain period of time, the unit will automatically enter auto power 
shut-off mode (p.53) in order to minimise power consumption. In cases where the 
machine will not be used for a long time, turn off the power switch and remove the 
power cord from the outlet.
Copy quantity
1 copy
Exposure adjustment
AUTO
Zoom
100%
Tray
Paper tray
AL-1457
"0" is displayed in the display.
13
2
About the scan head
The scan head lamp remains on constantly when the unit is in the ready condition 
(when the start (
) indicator is illuminated).
The unit adjusts the scan head lamp periodically to maintain copying quality. At this 
time, the scan head moves automatically. This is normal and does not indicate unit 
trouble.
Initial settings of operation panel
When the unit power is on, the operation panel will revert to the initial settings when 
the time set with the "Auto clear time" setting (p.53) elapses after a copy or scanner 
job is finished, or when the clear (
) key is pressed twice.
The initial settings of the operation panel are shown below.
When copying is begun in this state, the settings in the following table are used.
Power off methods
If not used for a certain period of time, the unit will automatically enter auto power 
shut-off mode (p.53) in order to minimise power consumption. In cases where the 
machine will not be used for a long time, turn off the power switch and remove the 
power cord from the outlet.
Copy quantity
1 copy
Exposure adjustment
AUTO
Zoom
100%
Tray
Paper tray
AL-1457
"0" is displayed in the display.
Page of 7
Display

Sharp AL-1217 (serv.man23) User Manual / Operation Manual ▷ Download