AL-1217 (serv.man23). Setting up the unit — Sharp Copying Equipment User Guide / Operation Manual

Model
AL-1217 (serv.man23)
Pages
7
Size
272.13 KB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Copying Equipment / Setting up the unit
File
al-1217-sm23.pdf
Date

View Sharp AL-1217 (serv.man23) User Guide / Operation Manual online

7
2
Follow the installation procedure below to use the unit properly.
SETUP PROCEDURE
When using the unit for the first time, setup the unit following the procedure shown 
below.
*
1
The multi-bypass tray is only included with the AL-1457.
*
2
If you are only using the unit for copying, skip this step.
If the unit does not function properly during setup or use, or if a function 
cannot be used, see "TROUBLESHOOTING THE UNIT" (p.59).
1 Open the package, and make sure that all the accessories are 
supplied with the unit. (p.8)
2 Remove the protective materials. (p.9)
3 Install the TD cartridge. (p.10)
4 Load the paper in the paper tray (p.15) or the multi-bypass 
tray*
1
.
 
(p.17)
5 Connect the power cord. (p.12)
8 Now, you can copy (p.46), print (p.33), or scan (p.35) your 
7 Connect the interface cable*
2
 (p.45) and turn on the unit. (p.12)
6 Install the software.*
2
 (p.19)
2
SETTING UP THE UNIT
8
CHECKING PACKED COMPONENTS AND 
ACCESSORIES
Open the carton and check if the following components and accessories are 
included.
If anything is not included or is damaged, contact your authorised service 
representative.
PREPARING THE UNIT FOR INSTALLATION
1
Be sure to hold the handles on 
both sides of the unit to unpack 
the unit and carry it to the 
installation location.
Drum cartridge 
(installed in unit)
Operation manual
Power cord
Software CD-ROM
TD cartridge
9
2
2
Remove all pieces of tape shown in the illustration below. Then 
open the original cover/SPF and remove protective materials. 
After that, take out the bag containing the power cord and TD 
cartridge.
3
Release the scan head locking switch.
The scan head locking switch is under the original table.
If the switch is locked (
)
, the unit will not operate. Unlock the switch (
as shown below.
AL-1217
AL-1457
Lock
Unlock
Grasp here and turn in 
the direction of the arrow.
10
INSTALLING THE TD CARTRIDGE
1
Open the multi-bypass tray 
(AL-1457, p.17
), and then 
open the side cover.
2
Remove the CAUTION tape from the front cover and remove the 
two protective pins from the fusing unit by pulling the strings 
upward one at a time.
3
Push gently on both sides of the 
front cover to open the cover.
4
Remove the TD cartridge from the bag. Remove the protective 
paper. Hold the cartridge on both sides and shake it 
horizontally four or five times. Hold the tab of the protective 
cover and pull the tab to your side to remove the cover.
CAUTION tape
Protective pins
4 or 5 times
Page of 7
Display

Download Sharp AL-1217 (serv.man23) User Guide / Operation Manual

Here you can view online or download Sharp AL-1217 (serv.man23) User Guide / Operation Manual in pdf. This User Guide / Operation Manual can help you recover, restore, fix, disassemble and repair Sharp AL-1217 (serv.man23) Copying Equipment. Information contained in Sharp AL-1217 (serv.man23) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).