DOWNLOAD Sharp AL-1217 (serv.man11) Service Manual ↓ Size: 2.22 MB | Pages: 21 in PDF or view online for FREE

Model
AL-1217 (serv.man11)
Pages
21
Size
2.22 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Disassembly and assembly
File
al-1217-sm11.pdf
Date

Sharp AL-1217 (serv.man11) Service Manual ▷ View online

AL-1226  DISASSEMBLY AND ASSEMBLY  8 - 5
4. Fusing section
A. List
B. Disassembly procedure
1) Remove the connectors (3 pcs.) of the rear cabinet.
2) Open the side cover, remove two screws, and remove the fusing
unit.
3) Cut the binding band, remove the screw, and remove the ther-
mistor.
4) Remove the screw and remove the U-turn guide.
Pressure roller section disassembly
5) Remove the three screws, remove the fusing cover lower on the
right side, and open the heat roller section.
6) Remove the screw and remove the PPD2 sensor.
No.
Part name Ref.
1
Thermistor
2
PPD2 sensor
3
Heater lamp
4
Pressure roller
5
Heat roller
1)
2)
3)
2)
1)
2)
3)
Thermistor
1)
2)
1)
5)
5)
6)
6)
4)
3)
2)
1)
2)
PPD2 sensor
AL-1226  DISASSEMBLY AND ASSEMBLY  8 - 6
7) Remove the plate spring on the right and remove the heater lamp.
8) Remove the spring and remove the separation pawls (3 pcs.).
9) Remove the E-ring and remove the reverse gate.
10) Remove the pressure release levers on the right and the left sides.
11) Remove the pressure roller, the pressure bearing, and the spring.
Note: Apply grease to the sections specified with an asterisk (*).
Heat roller disassembly
(Continued from procedure (4).)
5) Remove screws, remove the fusing cover, and open the heat roller
section.
1)
2)
Heater lamp
3)
1)
2)
2)
1)
3)
1)
1)
1)
2)
2)
1)
3)
3)
Pressure roller
1)
2)
2)
3)
3)
AL-1226  DISASSEMBLY AND ASSEMBLY  8 - 7
6) Remove the C-ring and the fusing bearing, and remove the heat
roller.
7) Remove the parts from the heat roller.
Note: Apply grease to the sections specified with *.
8) Remove two screws and remove the thermo unit.
C. Assembly procedure
For assembly, reverse the disassembly procedure.
5. Tray paper feed/transport section
A. List
B. Disassembly procedure
1) Remove two screws, and remove the hinge guide R.
2) Disconnect three positions of the connectors.
3) Remove six screws, and remove the scanner unit.
4) Remove the fan duct.
4) Remove each connector and three screws, and remove the MCU
PWB.
1)
2)
3)
Heat roller
1)
3)
1)
2)
3)
No.
Part name Ref.
1
PPD1 sensor PWB
2
LSU unit
3
Intermediate frame unit
4
Paper feed roller
2)
1)
2)
2)
2)
2)
2)
3)
1)
1)
1)
1)
1)
1)
2)
2)
2)
3)
AL-1226  DISASSEMBLY AND ASSEMBLY  8 - 8
5) Remove the PWB insulation mylar and remove the paper transport
detection sensor (PPD2).
6) Remove two screws and remove the toner motor.
7) Remove two springs and open the intermediate frame unit.
8) Remove the pulleys on the both sides and remove the paper exit
roller.
2)
1)
3)
1)
2)
1)
2)
4)
2)
1)
3)
Page of 21
Display

Click on the first or last page to see other AL-1217 (serv.man11) service manuals if exist.