Sharp AL-1045 (serv.man20) User Manual / Operation Manual ▷ View online
39
4
2
Place the original you wish to scan on the original table/SPF/RSPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT"
(p.47).
(p.47).
3
Press the right copy quantity key to
display the number of the application that
you wish to use for scanning.
display the number of the application that
you wish to use for scanning.
The application numbers are initially as follows.
To check the settings, see "Scan Parameter Setting Dialog Box" (p.36) and
then open the settings window of the Button Manager.
then open the settings window of the Button Manager.
Application
number
Application launched
SC1
Sharpdesk (Full colour) (if installed)
SC2
Sharpdesk (Monochrome) (if installed)
SC3
E-mail (your standard e-mail program in the
Windows OS you are using)
Windows OS you are using)
SC4
Fax (if a fax program is installed)
SC5
OCR (if an OCR program is installed)
SC6
Microsoft Word (if installed)
40
4
Press the start (
) key.
Scanning will start and the scanned data will be transfered to the
application.
application.
Opening the scanner driver and scanning from your computer
Follow the steps below to open the scanner driver setup screen. As an example, this
instruction is given using Sharpdesk as an image capture application.
instruction is given using Sharpdesk as an image capture application.
•
If the following screen appears, select
Button Manager and click "OK". Button
Manager starts and the application
associated with Button Manager starts. If
you want only Button Manager to start in
this case, set up Button Manager for use in
Windows as explained in "Setting up the
Button Manager" (p.34).
Button Manager and click "OK". Button
Manager starts and the application
associated with Button Manager starts. If
you want only Button Manager to start in
this case, set up Button Manager for use in
Windows as explained in "Setting up the
Button Manager" (p.34).
•
If step 4 is performed with the "Show TWAIN setting screen when
scanning" checkbox selected in the Scan Parameter Setting
Dialog Box (p.36), the TWAIN settings screen (p.40) will
automatically appear. Check the settings, and then press the
start (
Dialog Box (p.36), the TWAIN settings screen (p.40) will
automatically appear. Check the settings, and then press the
start (
)key again or click the "Scan" button in the TWAIN
setting screen to start scanning. The scanned data will be
transferred to the application.
transferred to the application.
•
Scanning is not possible during a copy and print job.
•
The method for starting the scanner driver differs depending on the type
of application. Refer to the manual or the help file of your application.
•
When using the scanner driver to scan an original that has been placed
in the SPF/RSPF. If you perform a pre-scan (see the online manual or
the help file for the scanner driver), the original in the SPF/RSPF will be
output to the exit area after scanning. To scan the original after the pre-
scan, place the original in the SPF/RSPF once again.
SHARP AL-XXXX
41
4
Using the SHARP TWAIN
1
Place the original you wish to scan on the original table/SPF/RSPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT"
(p.47).
(p.47).
2
After starting Sharpdesk, click the
"File" menu and select "Select
Scanner".
"File" menu and select "Select
Scanner".
3
Select "SHARP Personal MFP
Series", and click the "Select"
button.
Series", and click the "Select"
button.
4
Select "Acquire Image" from
the "File" menu, or click the
"Acquire" button (
the "File" menu, or click the
"Acquire" button (
) .
5
Set the configuration for scanning (refer to the online manual
and help file), and click the "Scan" button.
and help file), and click the "Scan" button.
Scan is started.
If you use more than one scanning device, select the scanner
you want to use through the application. The method for
accessing the "Select Scanner" option, depends upon the
application. For more information, see the online manual or the
help file of your application.
you want to use through the application. The method for
accessing the "Select Scanner" option, depends upon the
application. For more information, see the online manual or the
help file of your application.
Click here
Click here
42
Scanning with the "Scanner and Camera Wizard" in Windows XP
Windows XP includes as a standard feature an image scanning function. The
procedure for scanning with the "Scanner and Camera Wizard" is explained here.
procedure for scanning with the "Scanner and Camera Wizard" is explained here.
1
Click the "start" button , select "Control
Panel", and click "Printers and Other
Hardware", and then click "Scanners
and Cameras" in the start menu. Click
the "SHARP AL-xxxx" (where xxxx is
the model name of your unit) icon and
click "Get picture" in "Imaging Tasks".
Panel", and click "Printers and Other
Hardware", and then click "Scanners
and Cameras" in the start menu. Click
the "SHARP AL-xxxx" (where xxxx is
the model name of your unit) icon and
click "Get picture" in "Imaging Tasks".
2
The "Scanner and Camera Wizard"
appears. Click "Next" and establish the
basic settings for scanning.
appears. Click "Next" and establish the
basic settings for scanning.
For information on the settings, see the
Windows XP help file. After completing each
setting, click "Next".
Windows XP help file. After completing each
setting, click "Next".
3
Select a name, format, and folder for the
scanned image.
scanned image.
For information on the image name, file format,
and folder, see the Windows XP help file.
and folder, see the Windows XP help file.
4
Scanning begins. When scanning ends,
select the next task you wish to perform.
select the next task you wish to perform.
For information on each selection, see the
Windows XP help file. To quit the "Scanner and
Camera Wizard", select "Nothing. I’m finished
working with these pictures." and click "Next".
Windows XP help file. To quit the "Scanner and
Camera Wizard", select "Nothing. I’m finished
working with these pictures." and click "Next".
5
Click "Finish" in the screen that appears.
The "Scanner and Camera Wizard" closes and the scanned image is saved.
To cancel scanning, click the "Cancel" button in the screen that is
displayed.
displayed.
Click on the first or last page to see other AL-1045 (serv.man20) service manuals if exist.