Sharp AL-1000 / AL-1010 (serv.man10) Service Manual ▷ View online
(4) Remove the PPD1 sensor PWB.
(5) Remove the E-ring and remove the manual paper feed
transport roller.
(6) Remove the cassette detection switch.
(7) Remove the multi cover.
3)
1)
2)
Wire treatment
3)
3)
4)
1)
2)
1)
2)
3)
3)
Wire treatment
1)
Multi cover
AL-1000/1010
8-13
Multi unit
(1) Remove the screw and remove the multi upper cover.
(2) Remove the screw and remove the side door detection
unit.
(3) Remove three screws and remove the multi paper feed
upper frame.
(4) Remove two screws and remove the multi feed bracket unit
from the multi paper feed upper frame.
2)
1)
1)
2)
Red
Orange
Back
Wire treatment
1)
2)
1)
2)
2)
1)
1)
AL-1000/1010
8-14
(5) Remove three E-rings and remove the manual paper feed
roller B9.
(6) Remove the pick-up roller.
(7) Cut the binding band and remove the multi paper feed
solenoid.
C. Assembly procedure
For assembly, reverse the disassembly procedure.
D. Pressure plate holder attachment
(1) Attach the pressure plate holder so that the resin section is
not covered with the seal M1-N.
2)
1)
1)
1)
3)
L
O C
K
T
O
K
2)
1)
1)
2)
3)
Multi paper feed
solnoid
solnoid
Pressure plate
holder
holder
Seal M1-N
Attachment
reference
reference
Attachment
reference
reference
AL-1000/1010
8-15
7. Rear frame section
A. List
No.
Part name Ref.
page
1
Mirror motor
8-16
2
Main motor
8-16
3
Exhaust fan motor
8-16
B. Disassembly procedure
(1) Remove three screws and remove the rear cabinet.
(2) Remove two screws, the harness, and the mirror motor.
(3) Remove two screws and one harness, and remove the
main motor.
(4) Remove two screws and one connector, and remove the
exhaust fan motor.
C. Assembly procedure
For assembly, reverse the disassembly procedure.
1)
2)
1)
1)
2)
1)
2)
3)
3)
2)
1)
3)
1)
AL-1000/1010
8-16
Click on the first or last page to see other AL-1000 / AL-1010 (serv.man10) service manuals if exist.