DOWNLOAD Sharp PN-V602 (serv.man9) Service Manual ↓ Size: 10.44 MB | Pages: 60 in PDF or view online for FREE

7

E

- The TFT color LCD panel used in this monitor is made with

the application of high precision technology. However, there 

may be minute points on the screen where pixels never light 

or are permanently lit. Also, if the screen is viewed from 

an acute angle there may be uneven colors or brightness. 

Please note that these are not malfunctions but common 

phenomena of LCDs and will not affect the performance of

the monitor.

- Do not display a still picture for a long period, as this could

cause a residual image.

- Never rub or tap the monitor with hard objects.
- Please understand that SHARP CORPORATION bears no

responsibility for errors made during use by the customer or 

a third party, nor for any other malfunctions or damage to this 

product arising during use, except where indemnity liability is 

recognized under law.

- This monitor and its accessories may be upgraded without

advance notice.

- Do not use the monitor where there is a lot of dust, where

humidity is high, or where the monitor may come into contact 

with oil or steam, as this could lead to fire.

- Ensure that the monitor does not come into contact with

water or other fluids. Ensure that no objects such as paper

clips or pins enter the monitor as this could lead to fire or

electric shock.

- Do not place the monitor on top of unstable objects or in

unsafe places. Do not allow the monitor to receive strong

shocks or to strongly vibrate. Causing the monitor to fall or

topple over may damage it.

- Do not use the monitor near heating equipment or in places

where there is likelihood of high temperature, as this may 

lead to generation of excessive heat and outbreak of fire.

- Do not use the monitor in places where it may be exposed to

direct sunlight.

- If the monitor is installed in a location exposed to sunlight

such as next to a window, measures to reduce ultraviolet and 

infrared radiation and temperature measures are required.

For details, consult your dealer.

- Please be sure to constantly remove dust and garbage that

has attached to the ventilation opening. If dust collects in the 

ventilation opening, it may lead to excessive heat, outbreak 

of fire, or malfunction.  

As a standard, clean the inside of the monitor once every 

year. If dust collects inside the monitor, it may lead to 

excessive heat, outbreak of fire, or malfunction. Please

request a cleaning of the inside of the monitor from an

authorized SHARP servicing dealer or service center.

- Images cannot be rotated on this monitor. 

When using in vertical orientation, you will need to prepare

appropriately orientated content in advance.

- The AC outlet shall be installed near the equipment and shall

be easily accessible.

- Use only the power cord supplied with the monitor.
- Do not damage the power cord nor place heavy objects on

it, stretch it or over bend it. Also, do not add extension cords. 

Damage to the cord may result in fire or electric shock.

- Do not use the power cord with a power tap. 

Adding an extension cord may lead to fire as a result of

overheating.

- Do not remove or insert the power plug with wet hands.

Doing so could result in electric shock.

- Unplug the power cord if it is not used for a long time.
- Do not attempt to repair the power cord if it is broken

or malfunctioning. Refer the servicing to the service 

representative.

- Microsoft, Windows and Internet Explorer are registered

trademarks of Microsoft Corporation.

- HDMI, the HDMI Logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing LLC.

- Adobe, Acrobat, and Reader are either registered trademarks

or trademarks of Adobe Systems Incorporated in the United 

States and/or other countries.

- This product comes with RICOH Bitmap Fonts produced and

sold by RICOH COMPANY, LTD.

- All other brand and product names are trademarks or

registered trademarks of their respective holders.

- Language of OSD menu used in this manual is English by

way of example.

- Illustrations in this manual may not exactly represent the

actual product or display.

- This manual assumes use in landscape orientation, except

where specifically noted.

- This manual assumes that this product will be used with

the remote control unit buttons, except where specifically

noted. Operation by using the buttons on the rear side of the 

product will perform the same functions.

 * For operation with the remote control unit, the PN-ZR01

control kit (optional) is required.

●  The LED backlight in this product has a limited lifetime.

 * If the screen gets dark or does not turn on, it may be

necessary to replace the LED backlight. This LED

backlight is exclusive to this product and must be replaced 

by an authorized Sharp servicing dealer or service center.

 * Please contact your local Sharp servicing dealer or

service center for assistance.

●  The fan in this product has a limited lifetime.

8

E

•  This product is for use indoors.

•  A mounting bracket compliant with VESA specifications is

required.

•  Since the monitor is heavy, consult your dealer before

installing, removing or moving the monitor.

•  Mounting the monitor on the wall requires special expertise

and the work must be performed by an authorized SHARP

dealer. You should never attempt to perform any of this 

work yourself. Our company will bear no responsibility 

for accidents or injuries caused by improper mounting or

mishandling.

•  Use the monitor perpendicular to a level surface. If

necessary, the monitor may be tilted up to 20 degrees

upward or downward.

•  When mounting the monitor horizontally, the optional fan

cover (PN-ZR31) is required. For details along with the

horizontal mounting conditions, consult your dealer.

•  This monitor should be used at an ambient temperature

between 32°F (0°C) and 104°F (40°C).

•  Be careful of high temperatures in the surrounding area. 

When installing the monitor inside a housing, or if the

ambient temperature may be outside of the range of 32ºF

(0ºC) to 104ºF (40ºC), install a fan or take other measures

to keep the ambient temperature within the required range.

•  Temperature condition may change when using the monitor

together with the optional equipments recommended by

SHARP. In such cases, please check the temperature 

condition specified by the optional equipments.

•  Do not block any ventilation openings. If the temperature

inside the monitor rises, this could lead to a malfunction.

•  Do not place the monitor on a device which generates heat.

•  Adhere to the following when installing the monitor in its

portrait orientation. Failing to adhere to the following may

cause malfunctions. 

- To install in landscape orientation, rotate the monitor 90

degrees to the right.

- Set the MONITOR on the SETUP menu to PORTRAIT.

(See page 24.)

- Be sure to secure the power cord (supplied) to the cable

clamp attachment with the supplied cable clamp.  

Make sure that the power cord (supplied) does not supply

power to the terminal when being secured and do not 

over bend the power cord (supplied).

Cable clamp

Power cord (Supplied)

Cable clamp

attachment

•  When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.

•  Be sure to use a wall-mount bracket designed or designated for mounting the monitor.

•  This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials

such as plaster / thin plastic board / wood before starting installation.  

This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. 

Install by the most suitable method for the material and the structure.

•  To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than

the thickness of the mounting bracket.

•  When moving the monitor, be sure to hold it with either both handles or the 4 corners on the bottom of the unit. Do not hold

the LCD panel. This may cause product damage, failure, or injury.

•  When performing an installation where the monitor is stacked, please install it such that load is not placed on the monitor

frame.

•  After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.

•  Do not use any screw holes other than VESA holes for installation.

9

E

If any component should be missing, please contact your dealer.


 Liquid Crystal Display Monitor: 1



 Cable clamp: 2



 Power cord: 1



 CD-ROM (Utility Disk for Windows): 1



 Setup manual: 1



 Protection cover: 4



 Handle screw (short): 4



 Bezel sheet (long/short): 2 each



 Bezel sheet attachment instructions: 1

*  Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.

*  For environmental protection!

 Do not dispose of batteries in household waste. Follow the disposal instructions for your area.

Multiple monitor connection .......................................13

Installing the batteries ................................................15
Remote control operation range .................................15

Turning on the main power.........................................17
Turning power on/off ..................................................17
Disabling power on/off operations ..............................17

Displaying the menu screen .......................................22
Menu item details .......................................................23
Adjustments for PC screen display ............................30

PC connection ............................................................32
Communication conditions .........................................32
Communication procedure .........................................32
Setting of the GAMMA user data ................................36
RS-232C command table ...........................................37

Settings to connect to a LAN ......................................45
Controlling with a PC ..................................................47

10

E

n

n

Additional input/output terminals are available by attaching 

the PN-ZB02 interface expansion board (optional).

This section is used to connect optional hardware for 

function expansion. Offering this attachment location 

is not a guarantee that future compatible hardware 

attachments will be released.

This terminal is provided for possible future (optional)

function expansion. Offering of this terminal is not a 

guarantee that future expanded functionality will be 

provided.

Caution

•  Consult your SHARP dealer for attachment/detachment of

optional parts.

•  Do not block the fan cover.

•  Do not open the expansion terminal cover by yourself. 

There are high voltage parts inside the cover which may 

cause an electric shock.