DOWNLOAD Sharp PN-V602 (serv.man9) Service Manual ↓ Size: 10.44 MB | Pages: 60 in PDF or view online for FREE

49

E

49

This screen allows you to set the settings necessary when the 

monitor is connected to a LAN.

DHCP CLIENT
If your LAN has a DHCP server and you wish to obtain an

address automatically, change this setting to “ON”. 

To set the address manually, set this to “OFF”.
IP ADDRESS
If the DHCP CLIENT is set to “OFF”, specify an IP address.
SUBNET MASK
If the DHCP CLIENT is set to “OFF”, specify the subnet

mask.
DEFAULT GATEWAY
If the DHCP CLIENT is set to “OFF”, specify the default

gateway. 

If you are not using a default gateway, specify “0.0.0.0”.
DNS SERVER
Specify the DNS server address.

If you are not using a DNS server, specify “0.0.0.0”.
RESET
Clicking [Execute] returns all of the LAN SETUP settings

to the factory-preset values except for the DNS SERVER

setting.

TIPS

•  When manually setting the IP address, the IP address

for secondary monitors connected by RS-232C can be

automatically allocated. (See page 25.)

This screen allows you to specify the security-related settings.

USER NAME / PASSWORD
Sets up a user name and password to restrict access to this 

monitor. 

After entering a user name and password, click [Apply].
ACCEPT IP ADDRESS
You can limit access to this monitor by registering IP 

addresses of PCs that should have access.

To limit access, specify the option “From only specific IP

addresses”. Otherwise, to allow access from any PC, specify

“All IP Addresses”.
IP ADDRESS 1 to 3
If “ACCEPT IP ADDRESS” is set to “From only specific IP

addresses”, enter the IP addresses that you want to allow. 

TIPS

•  The USER NAME and PASSWORD can be up to 8

alphanumeric characters or symbols.  

•  To cancel the user name and/or password after it has been

set, make the box empty and click [Apply].

50

E

50

This screen allows you to specify the general LAN settings.

MONITOR NAME
Specify a name for this monitor as it should appear on the 

Internet Explorer screen.
AUTO LOGOUT TIME
Specify the time (in minutes) to elapse before automatically

disconnecting this monitor from the network. 

Specify in minutes from 1 to 65535. A value of ‘0’ will disable

this function. 
DATA PORT
Specify the TCP port number to use for exchanging data with

the monitor. 

Specify a value from 1025 to 65535.
SEARCH PORT
Specify the port number to use when searching for this 

monitor. 

Specify a value from 1025 to 65535.
INSTALLATION INFORMATION (NAME/LOCATION)
Specify the information to display for this monitor in the 

Internet Explorer window.

TIPS

•  The MONITOR NAME can be up to 16 alphanumeric

characters or symbols. 

•  Enter up to 50 characters in the NAME field in the

INSTALLATION INFORMATION.

•  Enter up to 100 characters in the LOCATION field in the

INSTALLATION INFORMATION.

This screen allows you to configure the e-mail sent periodically

or when the monitor has an error.

The settings depend on the configuration of your LAN. Ask

your LAN administrator for details. 

SMTP SERVER
Specify the SMTP server address for sending e-mail.

*  When using a domain name, make sure to specify the

DNS server as well. (See page 49.)

ORIGINATOR E-MAIL ADDRESS
Specify the e-mail address for this monitor.

This address becomes the e-mail address of the originator.
ORIGINATOR NAME
Specify the name for the originator. 

This name appears in the “Originator Name” field of the

e-mail.
AUTHENTICATION
Specify the authentication method to use when sending 

e-mail.
POP SERVER
If the “AUTHENTICATION” method is “POP before SMTP”,

specify the POP server address. 
ACCOUNT NAME / PASSWORD
If the “AUTHENTICATION” method is “POP before SMTP”,

specify the account name and password to connect to the 

POP server.  

TIPS

•  You can enter up to 64 alphanumeric characters or symbols

for the ORIGINATOR E-MAIL ADDRESS, ORIGINATOR

NAME, ACCOUNT NAME, and PASSWORD.

•  The SMTP SERVER and POP SERVER can be up to 64

characters. 

The following characters can be used: a-z, A-Z, 0-9, - , .

51

E

51

This screen allows you to specify the recipients of the e-mail

sent periodically or when the monitor has an error.

RECIPIENT E-MAIL ADDRESSES
Specify the e-mail addresses to send error notification e-mail

to.
CONDITION
Specify the conditions to send mails. 

When you check PERIODICAL, specify the date and time to

send the mails in the PERIODICAL setting.
CONFIRMATION
Sends test e-mail.

This allows you to confirm that the e-mail settings are

configured properly.
Attach the log file to a TEMPERATURE/HARDWARE error 

e-mail.
When this option is checked, a log is added to the mail which

notifies a temperature or status error.

TIPS

•  The RECIPIENT E-MAIL ADDRESSES can be up to 64

alphanumeric characters or symbols. 

When PERIODICAL for CONDITION of MAIL (RECIPIENT) is

checked, set the date and time to send the mail.

DAY OF THE WEEK
Specify the day of the week to send the periodical mails.
TIME
Specify the time of the day to send the periodical mails.

Caution

•  Do not turn off the main power when you set to send the

periodical mails.

•  Specify the correct date and time. (See page 26.)  

If the date and time settings are incorrect, the periodical 

mail is not sent properly.

•  Regularly confirm that the specified date and time is

correct.

•  When LOW POWER is selected for STANDBY MODE,

periodical mails will not be sent in standby mode.

52

E

52

You can configure settings related to SNMP.

SNMP SETTING
Set whether to enable or disable SNMP.
VERSION
Set the version of the SNMP to be supported.
COMMUNITY NAME 1 to 3
Set the name of the community required for the access.
USER 1 to 3
Set the user name, password, authentication method and 

other options required for access.
TRAP SETTING
Set whether to enable or disable the trap function.

When this function is enabled, a trap will be sent when the

monitor is turned on.
TRAP SETTING OF AUTHENTICATION ERROR
Set whether the trap function sends a notification when

authentication fails.
TRAP ADDRESS & PORT
Set the destination address and port number of the 

notification sent by the trap function.

Caution

•  After you set SNMP, click [Switch the main power of

monitor off and on now.] or turn off the monitor and then

turn it on again with the main power switch. When the

monitor restarts, wait about 30 seconds and then start the

next operation.

•  If the IP address is changed while the SNMP function is

operational, turn off the monitor and then turn it on again 

with the main power switch.

TIPS

•  Depending on the SNMP settings, a short delay may occur

before the SNMP is usable. (About 2 minutes)

•  Up to 16 alphanumeric letters and symbols can be used for

the community name, user name and password.

You can display a specific URL in the URL INFORMATION

field on the INFORMATION screen when an error occurs in

the monitor. (See page 48.)

URL INFORMATION
Enter the URL to display on the INFORMATION screen when

an error occurs on the monitor.

Up to 64 alphanumeric characters or symbols can be used.
CONDITION
Specify the condition to display the URL.
CONFIRMATION
The home page of the specified URL is displayed.

You can check whether the URL you entered is correct.

TIPS

•  It is also possible to specify the message text, such as the

name of a contact or a telephone number, to be displayed 

instead of the linked URL.