DOWNLOAD Sharp PN-V602 (serv.man9) Service Manual ↓ Size: 10.44 MB | Pages: 60 in PDF or view online for FREE

4

E

Attention: If you want to dispose of this equipment, please do not use the ordinary dustbin!
Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper

treatment, recovery and recycling of used electrical and electronic equipment.

Following the implementation by member states, private households within the EU states may return their used electrical and

electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take

back your old product free of charge if you purchase a similar new one. 
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand

according to local requirements.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and

recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due 

to inappropriate waste handling.

If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.  
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t

purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.sens.ch.

If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the

costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection

facilities.
For Spain: Please contact the established collection system or your local authority for take-back of your used products.

If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal.

Attention: Your product is marked with this symbol. It means that used electrical and electronic products 

should not be mixed with general household waste. There is a separate collection system for these products.

EU ONLY

The battery supplied with this product contains traces of Lead.

For EU:

The crossed-out wheeled bin implies that used batteries should not be put to the general household

waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in

accordance with legislation. Please contact your local authority for details on the collection and recycling 

schemes.

For Switzerland:

The used battery is to be returned to the selling point.

For other non-EU countries:

Please contact your local authority for correct method of disposal of the used battery.

EU ONLY

“BATTERY DISPOSAL”

THIS PRODUCT CONTAINS A LITHIUM PRIMARY (MANGANESS DIOXIDE) MEMORY BACK-UP BATTERY THAT

MUST BE DISPOSED OF PROPERLY. PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORIZED SERVICE

REPRESENTATIVE FOR ASSISTANCE IN DISPOSING OF THIS BATTERY.

U.S.A. AND CANADA ONLY

5

E

Thank you for your purchase of a SHARP LCD product. To ensure safety and many years of trouble-free operation of your

product, please read the Safety Precautions carefully before using this product.

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly

handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can 

result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing,

operating and cleaning the product. To ensure your safety and prolong the service life of your LCD product, please read the

following precautions carefully before using the product.

  1.  Read instructions — All operating instructions must be read and understood before the product is operated.
 2.   Keep this manual in a safe place — These safety and operating instructions must be kept in a safe place for future

reference.

 3.  Observe warnings — All warnings on the product and in the instructions must be observed closely.

 4.  Follow instructions — All operating instructions must be followed.

 5.   Cleaning — Unplug the power cord from the AC outlet before cleaning the product. Use a dry cloth to clean the product. Do

not use liquid cleaners or aerosol cleaners.

 6.   Attachments — Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result

in accidents.

 7.   Water and moisture — Do not use the product near water. Do not install the product in a place where water may splash onto

it. Be careful of equipment which drains water such as an air-conditioner.

 8.  Ventilation — The vents and other openings in the cabinet are designed for ventilation.

    Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life

of the product. Do not place the product on a sofa, rug or other similar surface, since they can block ventilation openings.

Do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the

manufacturer’s instructions are followed.

 9.   Power cord protection — The power cords must be routed properly to prevent people from stepping on them or objects from

resting on them.

10.   The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with

impact. Be careful not to be injured by broken glass pieces in case the LCD panel breaks.

11.  Overloading — Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.

12.   Entering of objects and liquids — Never insert an object into the product through vents or openings. High voltage flows in

the product, and inserting an object can cause electric shock and/or short internal parts.

   For the same reason, do not spill water or liquid on the product.

13.   Servicing — Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other

dangerous conditions. Request a qualified service person to perform servicing.

14.   Repair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service

person to perform repairs. 

a.  When the power cord or plug is damaged. 

b.  When a liquid was spilled on the product or when objects have fallen into the product. 

c.  When the product has been exposed to rain or water. 

d.  When the product does not operate properly as described in the operating instructions. 

  Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls

not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified

technician.

   e.  When the product has been dropped or damaged. 

   f.   When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product

needs servicing.

15.   Replacement parts — In case the product needs replacement parts, make sure that the service person uses replacement

parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of

unauthorized parts can result in fire, electric shock and/or other danger.

16.  Safety checks — Upon completion of service or repair work, request the service technician to

    perform safety checks to ensure that the product is in proper operating condition.

17.   Wall mounting — When mounting the product on a wall, be sure to install the product according to the method

recommended by the manufacturer.

18.   Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating

products (including amplifiers).

6

E

19.  Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment,

    dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below:

   • Use the specified batteries only.

   • Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries according to the instructions in the

compartment.

   • Do not mix old and new batteries.

   • Do not mix batteries of different types. Voltage specifications of batteries of the same shape may vary.

   • Replace an exhausted battery with a new one promptly.

   • If you will not use the remote control for a long time, remove the batteries.

   • If leaked battery fluid gets on your skin or clothing, rinse immediately and thoroughly. If it gets into your eye, bathe your

eye well rather than rubbing and seek medical treatment immediately. Leaked battery fluid that gets into your eye or your

clothing may cause a skin irritation or damage your eye.

20.   Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury,

severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and 

missile launch control in a weapon system.

21.   Do not stay in contact with the parts of the product that become hot for long periods of time. Doing so may result in  

low-temperature burns.

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be 

required to take adequate counter measures.

To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: PC/AV DVI-D output

terminal, PC/AV DVI-D input terminal, PC/AV HDMI input terminal, PC D-SUB input terminal, PC RGB input terminals, and

RS-232C input/output terminals.

If a monitor is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries,

particularly to children, can be avoided by taking simple precautions such as:

• Using fixing devices like wall mount brackets recommended by the manufacturer.

• Only using furniture that can safely support the monitor.

• Ensuring the monitor is not overhanging the edge of the supporting furniture.

• Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the

monitor to a suitable support.

• Not standing the monitors on cloth or other materials placed between the monitor and supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the monitor or its controls.

- Don’t allow children to climb on or play with the monitor.

- Don’t place the monitor on furniture that can easily be used as steps, such as a chest of drawers.

- Remember that children can become excited while watching a program, especially on a “larger than life” monitor. Care

should be taken to place or install the monitor where it cannot be pushed, pulled over, or knocked down.

- Care should be taken to route all cords and cables connected to the monitor so that they cannot be pulled or grabbed by

curious children.

7

E

- The TFT color LCD panel used in this monitor is made with

the application of high precision technology. However, there 

may be minute points on the screen where pixels never light 

or are permanently lit. Also, if the screen is viewed from 

an acute angle there may be uneven colors or brightness. 

Please note that these are not malfunctions but common 

phenomena of LCDs and will not affect the performance of

the monitor.

- Do not display a still picture for a long period, as this could

cause a residual image.

- Never rub or tap the monitor with hard objects.
- Please understand that SHARP CORPORATION bears no

responsibility for errors made during use by the customer or 

a third party, nor for any other malfunctions or damage to this 

product arising during use, except where indemnity liability is 

recognized under law.

- This monitor and its accessories may be upgraded without

advance notice.

- Do not use the monitor where there is a lot of dust, where

humidity is high, or where the monitor may come into contact 

with oil or steam, as this could lead to fire.

- Ensure that the monitor does not come into contact with

water or other fluids. Ensure that no objects such as paper

clips or pins enter the monitor as this could lead to fire or

electric shock.

- Do not place the monitor on top of unstable objects or in

unsafe places. Do not allow the monitor to receive strong

shocks or to strongly vibrate. Causing the monitor to fall or

topple over may damage it.

- Do not use the monitor near heating equipment or in places

where there is likelihood of high temperature, as this may 

lead to generation of excessive heat and outbreak of fire.

- Do not use the monitor in places where it may be exposed to

direct sunlight.

- If the monitor is installed in a location exposed to sunlight

such as next to a window, measures to reduce ultraviolet and 

infrared radiation and temperature measures are required.

For details, consult your dealer.

- Please be sure to constantly remove dust and garbage that

has attached to the ventilation opening. If dust collects in the 

ventilation opening, it may lead to excessive heat, outbreak 

of fire, or malfunction.  

As a standard, clean the inside of the monitor once every 

year. If dust collects inside the monitor, it may lead to 

excessive heat, outbreak of fire, or malfunction. Please

request a cleaning of the inside of the monitor from an

authorized SHARP servicing dealer or service center.

- Images cannot be rotated on this monitor. 

When using in vertical orientation, you will need to prepare

appropriately orientated content in advance.

- The AC outlet shall be installed near the equipment and shall

be easily accessible.

- Use only the power cord supplied with the monitor.
- Do not damage the power cord nor place heavy objects on

it, stretch it or over bend it. Also, do not add extension cords. 

Damage to the cord may result in fire or electric shock.

- Do not use the power cord with a power tap. 

Adding an extension cord may lead to fire as a result of

overheating.

- Do not remove or insert the power plug with wet hands.

Doing so could result in electric shock.

- Unplug the power cord if it is not used for a long time.
- Do not attempt to repair the power cord if it is broken

or malfunctioning. Refer the servicing to the service 

representative.

- Microsoft, Windows and Internet Explorer are registered

trademarks of Microsoft Corporation.

- HDMI, the HDMI Logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing LLC.

- Adobe, Acrobat, and Reader are either registered trademarks

or trademarks of Adobe Systems Incorporated in the United 

States and/or other countries.

- This product comes with RICOH Bitmap Fonts produced and

sold by RICOH COMPANY, LTD.

- All other brand and product names are trademarks or

registered trademarks of their respective holders.

- Language of OSD menu used in this manual is English by

way of example.

- Illustrations in this manual may not exactly represent the

actual product or display.

- This manual assumes use in landscape orientation, except

where specifically noted.

- This manual assumes that this product will be used with

the remote control unit buttons, except where specifically

noted. Operation by using the buttons on the rear side of the 

product will perform the same functions.

 * For operation with the remote control unit, the PN-ZR01

control kit (optional) is required.

●  The LED backlight in this product has a limited lifetime.

 * If the screen gets dark or does not turn on, it may be

necessary to replace the LED backlight. This LED

backlight is exclusive to this product and must be replaced 

by an authorized Sharp servicing dealer or service center.

 * Please contact your local Sharp servicing dealer or

service center for assistance.

●  The fan in this product has a limited lifetime.