DOWNLOAD Sharp PN-V602 (serv.man9) Service Manual ↓ Size: 10.44 MB | Pages: 60 in PDF or view online for FREE

IMPORTANT:

To aid reporting in case of loss or theft, please record the 

product’s model and serial numbers in the space provided. 

The numbers are located in the rear of the product.

Model No.:

Serial No.:

U.S.A. ONLY

The wires in this mains lead are coloured in accordance with the following code:

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the 
terminals in your plug proceed as follows:

• The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the

letter 

E or by the safety earth   or coloured green or green-and-yellow.

• The wire which is coloured BLUE must be connected to the terminal which is marked with the letter

N or coloured black.

• The wire which is coloured BROWN must be connected to the terminal which is marked with the letter

L or coloured red.

Ensure that your equipment is connected correctly. If you are in any doubt consult a qualified electrician.

Authorised representative responsible for the European Union Community Market

SHARP ELECTRONICS (Europe) GmbH

Sonninstraße 3, D-20097 Hamburg

3

E

WARNING:  TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

CAUTION:   TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER. 

NO USER-SERVICEABLE PARTS

INSIDE. 

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within

an equilateral triangle, is intended to alert the

user to the presence of uninsulated “dangerous 

voltage” within the product’s enclosure that may 

be of sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within a triangle is 

intended to alert the user to the presence of 

important operating and maintenance (servicing)

instructions in the literature accompanying the 

product.

 

FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the

manufacturer could void the user’s authority to operate this equipment.

This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. 

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required

to correct the interference at his own expense.

This product utilizes a CR coin Lithium battery which contains a Perchlorate material.

Special handling for this material may apply, 

California residents, See www.dtsc.ca.gov/hazardouswaste/perchlorate/ 

Others, consult local environmental officers.

U.S.A. ONLY

4

E

Attention: If you want to dispose of this equipment, please do not use the ordinary dustbin!
Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper

treatment, recovery and recycling of used electrical and electronic equipment.

Following the implementation by member states, private households within the EU states may return their used electrical and

electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take

back your old product free of charge if you purchase a similar new one. 
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand

according to local requirements.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and

recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due 

to inappropriate waste handling.

If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.  
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t

purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.sens.ch.

If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the

costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection

facilities.
For Spain: Please contact the established collection system or your local authority for take-back of your used products.

If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal.

Attention: Your product is marked with this symbol. It means that used electrical and electronic products 

should not be mixed with general household waste. There is a separate collection system for these products.

EU ONLY

The battery supplied with this product contains traces of Lead.

For EU:

The crossed-out wheeled bin implies that used batteries should not be put to the general household

waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in

accordance with legislation. Please contact your local authority for details on the collection and recycling 

schemes.

For Switzerland:

The used battery is to be returned to the selling point.

For other non-EU countries:

Please contact your local authority for correct method of disposal of the used battery.

EU ONLY

“BATTERY DISPOSAL”

THIS PRODUCT CONTAINS A LITHIUM PRIMARY (MANGANESS DIOXIDE) MEMORY BACK-UP BATTERY THAT

MUST BE DISPOSED OF PROPERLY. PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORIZED SERVICE

REPRESENTATIVE FOR ASSISTANCE IN DISPOSING OF THIS BATTERY.

U.S.A. AND CANADA ONLY

5

E

Thank you for your purchase of a SHARP LCD product. To ensure safety and many years of trouble-free operation of your

product, please read the Safety Precautions carefully before using this product.

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly

handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can 

result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing,

operating and cleaning the product. To ensure your safety and prolong the service life of your LCD product, please read the

following precautions carefully before using the product.

  1.  Read instructions — All operating instructions must be read and understood before the product is operated.
 2.   Keep this manual in a safe place — These safety and operating instructions must be kept in a safe place for future

reference.

 3.  Observe warnings — All warnings on the product and in the instructions must be observed closely.

 4.  Follow instructions — All operating instructions must be followed.

 5.   Cleaning — Unplug the power cord from the AC outlet before cleaning the product. Use a dry cloth to clean the product. Do

not use liquid cleaners or aerosol cleaners.

 6.   Attachments — Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result

in accidents.

 7.   Water and moisture — Do not use the product near water. Do not install the product in a place where water may splash onto

it. Be careful of equipment which drains water such as an air-conditioner.

 8.  Ventilation — The vents and other openings in the cabinet are designed for ventilation.

    Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life

of the product. Do not place the product on a sofa, rug or other similar surface, since they can block ventilation openings.

Do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the

manufacturer’s instructions are followed.

 9.   Power cord protection — The power cords must be routed properly to prevent people from stepping on them or objects from

resting on them.

10.   The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with

impact. Be careful not to be injured by broken glass pieces in case the LCD panel breaks.

11.  Overloading — Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.

12.   Entering of objects and liquids — Never insert an object into the product through vents or openings. High voltage flows in

the product, and inserting an object can cause electric shock and/or short internal parts.

   For the same reason, do not spill water or liquid on the product.

13.   Servicing — Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other

dangerous conditions. Request a qualified service person to perform servicing.

14.   Repair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service

person to perform repairs. 

a.  When the power cord or plug is damaged. 

b.  When a liquid was spilled on the product or when objects have fallen into the product. 

c.  When the product has been exposed to rain or water. 

d.  When the product does not operate properly as described in the operating instructions. 

  Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls

not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified

technician.

   e.  When the product has been dropped or damaged. 

   f.   When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product

needs servicing.

15.   Replacement parts — In case the product needs replacement parts, make sure that the service person uses replacement

parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of

unauthorized parts can result in fire, electric shock and/or other danger.

16.  Safety checks — Upon completion of service or repair work, request the service technician to

    perform safety checks to ensure that the product is in proper operating condition.

17.   Wall mounting — When mounting the product on a wall, be sure to install the product according to the method

recommended by the manufacturer.

18.   Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating

products (including amplifiers).