DOWNLOAD Sharp PN-V602 (serv.man7) Service Manual ↓ Size: 11.26 MB | Pages: 49 in PDF or view online for FREE

PN-V602　HARDWARE DESCRIPTIONS

 8 – 5

■ MAIN COMPLETE PARTS AND FUNCTION

■ MAIN COMPLETE PARTS AND FUNCTION

■ I/O SIGNAL

*

1

The setting of terminals needs to be configured in the terminal selection menu.

■ MAIN COMPLETE PARTS AND FUNCTION

IC4,IC5,IC12,IC13,IC18,IC19,IC23,IC24,IC25,
IC30,IC31,IC39

iW7032S

(LED Drv IC)
 Controls PWM the LED.

IC1,IC2,IC3,IC6,IC9,IC10,IC14,IC15,IC16,
IC17,IC20,IC21,IC22,IC26,IC27,IC28,IC29,

IC32,IC33,IC34,IC35,IC36,IC37,IC38

BD9306AFVM

(DC/DC) 
Boosted from 24V, and generates the LED 

applying voltage.

IC7,IC8

TC74VHC138FT

(Decoder)

IC11

SN74LVC244APW R

(BUFFER)

D101

SML-022ML8T

LED

SW101, SW102, 
SW103, SW104, 

SW105, SW106, 

SW107

SKRPABE010

Switch

PC signal

Digital video input terminal (DVI-compliant)

DVI-D terminal 

*1

Digital video output terminal (for daisy chaining)

DVI-D terminal

Analog video input terminal

BNC x 5 

*1

AV signal

Digital video input terminal

DVI-D terminal

Composite video input terminal

BNC x 1

Component video input terminal

BNC x 3 

*1

S terminal

S terminal

Audio signal

Audio input terminal for AV devices

RCA (R) (L) x 2

Speaker output

Support for 6

Ω speaker

Speaker terminal

IC201

SiI9135ACTU

HDCP compliant DVI receiver.

IC302, IC305

SiI9134CTU

DVI transmitter, used to transmit video data from extension side to main side.

IC204

R1EX24002ASAS0A

I

2

C compliant EEPROM, stores EDID data for HDMI. 

Write-protect can be released from service menu.

IC401

MCF52258AG80

Microcontroller for LAN control.

Once this microcontroller is replaced, the firmware/ MAC address is cleared.

Since the MAC address is not allowed to be written on the occasion of ser-
vice, it is not established as a service part.

IC402

CS18LV20483EIR55

SRAM, used as RAM for the microcontroller of LAN control.

IC403

RTL8201EL-GR

Ethernet PHYCEIVER

IC408

SC16IS750IPW

I

2

C · EUART, used for communication with the main scaler.

IC502

STA333W

Digital audio amplifier with the expansion board connected.

IC203, IC304

S-1132B33-M5T1G

Regulator, generates various kinds of voltages.

IC205, IC306

PQ018ENAZ1PH

IC501

PQ1LA335

PN-V602　HARDWARE DESCRIPTIONS

 8 – 6

■ I/O SIGNAL

■ MAIN COMPLETE PARTS AND FUNCTION

Control Signal

Control Kit control input/output terminal

3pin connector (The harness for connecting I/F board is connected on the 
PWB.)

IC103

R5F21324CNSP

Micro computer (micom) Communicate with the micom on the I/F board, and 

send the illumination sensor ADC value and remote control data.

IC105

GP1USC31XP

Photoreceiver for remote controller. 

Receive the signal from the remote controller.

IC106

GA1A2S100LY

Illumination sensor. 

Receive the light around the Control Kit (PN-ZR01).

IC101

TC7SH14FU

Schmitt trigger inverter

IC102

PQ1X301M2ZPH

Regulator. 

Generate the ADC reference voltage of micom and illumination sensor.

PN-V602　HARDWARE DESCRIPTIONS

 8 – 7

This model employs the local dimming system which controls the brightness individually by dividing the LED’s into 16 x 12 lighting areas for saving

energy and improving the contrast. The difference from the conventional models is as explained below.

In the conventional systems as shown in Fig. 2-2a, video signals are transmitted in the path of the main PWB 

3 LCD-TCON PWB 3 LED. The back-

light is turned ON/OFF by the main PWB.

In the local dimming system as shown in Fig. 2-2b, video signals are transmitted to the LED-TCON PWB, then divided into the two paths; one for con-
trol of LED lighting according images, and the other for displaying images. The LED-TCON controls the LED driver, and controls the brightness of

each area deliberately, lighting LED's at the proper brightness. At the same time, the corrected images according to the LED lighting are transmitted

to the LCD-TCON. The both operations work together to display proper images. The LED-TCON PWB and the LED driver PWB are the great factors
of the improvement in this model.

LCD-TCON 

LED power
[+LED driver]

LCD 

LED 

Main PWB

LCD-

TCON 

LCD 

LED 

LED-

TCON 

Main PWB

[Panel side]

[Backlight side]

LED

driver

PN-V602　HARDWARE DESCRIPTIONS

 8 – 8

LCD data

Error notification

LCD-

TCON

LED-

TCON

PWB

PWB

LCD data

LCD panel

LED backlight

LED data

LED data

Area control technology

Lights the necessary areas 
at the proper brightness.

Main I/F 

PWB

Control signal

LED image (LED backlight)

LCD module

Output image (LED module)

LCD image (LED panel)

Input image

Image data

Image data

LED 

driver 

PWB