Sharp PN-V602 (serv.man6) Service Manual ▷ View online
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-V602 OUTLINE OF THE PRODUCT
1 – 3
1 - 3. DIMENSIONAL DRAWINGS
■ PN-V602
When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method.
SHARP recommends using M6 screws and tighten the screws.
Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in serious personal injuries as
well as damage to the product. The screw and hole should come together with over 5/16 inch (8 mm) length of thread. Use a bracket which has been
well as damage to the product. The screw and hole should come together with over 5/16 inch (8 mm) length of thread. Use a bracket which has been
approved for UL1678 standard, and which can endure at least 4 times or more the weight of the monitor.
■ PN-ZR01
Unit: inch [mm]
52-5/8 [1335.9]
Opening width (52-5/16 [1329.4])
Opening height
(2
9
-7/16 [747.7])
2
9
-11/16 [754.2]
7-7/8 [200]
5-7/8
[149.3]
52-5/8 [1335.9]
3-5/8
[92.3]
7-7/8
[200]
7-7/8
[200]
*1
3-15/16
[100]
3-15/16
[100]
VESA
holes
holes
3
3
42
34
34.2
38.8
18.8
2
9
.71
19
11
130
6
34.4
29
1.4
46.4
31
Remote control
sens
sens
(Unit: mm)
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-V602 OUTLINE OF THE PRODUCT
1 – 4
1 - 4. COMPATIBLE SIGNAL TIMING (PC)
*
1
Displays a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down to panel size then displayed.
*
2
Available when the PN-ZB02 (optional) is attached.
*
All are compliant only with non-interlaced.
*
Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input.
*
The frequency values for the Sun are reference values.
Screen resolution
Hsync
Vsync
Dot frequency
Digital
Analog
(D-SUB/RGB
*2
)
DVI
*2
HDMI
VESA
640 x 480
31.5kHz
60Hz
25.175MHz
Yes
Yes
Yes
37.9kHz
72Hz 31.5MHz Yes
Yes
Yes
37.5kHz
75Hz 31.5MHz Yes
Yes
Yes
800 x 600
35.1kHz
56Hz
36.0MHz
---
---
Yes
37.9kHz
60Hz 40.0MHz Yes
Yes
Yes
48.1kHz
72Hz 50.0MHz Yes
Yes
Yes
46.9kHz
75Hz 49.5MHz Yes
Yes
Yes
848 x 480
31.0kHz
60Hz
33.75MHz
Yes
---
Yes
1024 x 768
48.4kHz
60Hz
65.0MHz
Yes
Yes
Yes
56.5kHz
70Hz 75.0MHz Yes
Yes
Yes
60.0kHz
75Hz 78.75MHz Yes
Yes
Yes
1152 x 864
*1
67.5kHz
75Hz 108.0MHz Yes
Yes
Yes
1280 x 768
47.8kHz
60Hz
79.5MHz
Yes
---
Yes
60.3kHz
75Hz 102.25MHz Yes
---
Yes
1280 x 800
*1
49.7kHz
60Hz
83.5MHz
Yes
Yes
Yes
1280 x 960
*1
60.0kHz
60Hz 108.0MHz Yes
Yes
Yes
1280 x 1024
*1
64.0kHz
60Hz 108.0MHz Yes
Yes
Yes
80.0kHz
75Hz 135.0MHz Yes
Yes
Yes
1360 x 768
47.7kHz
60Hz
85.5MHz
Yes
Yes
Yes
1400 x 1050
*1
65.3kHz
60Hz 121.75MHz Yes
Yes
Yes
1440 x 900
*1
55.9kHz
60Hz
106.5MHz
Yes
---
Yes
1600 x 1200
*1
75.0kHz
60Hz 162.0MHz Yes
Yes
Yes
1680 x 1050
*1
65.3kHz
60Hz 146.25MHz Yes
Yes
Yes
Wide
1280 x 720
44.7kHz
60Hz
74.4MHz
Yes
Yes
Yes
1366 x 768
47.7kHz
60Hz
85.383MHz
Yes
Yes
Yes
1920 x 1080
*1
66.3kHz
60Hz 148.5MHz Yes
Yes
Yes
67.5kHz
US TEXT
720 x 400
31.5kHz
70Hz
28.3MHz
Yes
Yes
Yes
Sun 1024
x
768
48.3kHz
60Hz
64.13MHz ---
---
Yes
53.6kHz
66Hz 70.4MHz ---
---
Yes
56.6kHz
70Hz 74.25MHz ---
---
Yes
1152 x 900
*1
61.8kHz
66Hz 94.88MHz ---
---
Yes
71.8kHz 76.2Hz
108.23MHz
---
---
Yes
1280 x 1024
*1
71.7kHz
67.2Hz
117.01MHz ---
---
Yes
81.1kHz
76Hz 134.99MHz ---
---
Yes
1600 x 1000
*1
68.6kHz 66Hz
135.76MHz
---
---
Yes
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-V602 OUTLINE OF THE PRODUCT
1 – 5
1 - 5. COMPATIBLE SIGNAL TIMING (AV)
*
1
Displays a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down to panel size then displayed.
*
2
Available when the PN-ZB02 (optional) is attached.
1 - 6. POWER MANAGEMENT
This monitor conforms to VESA DPMS and DVI DMPM. Both your video
card and computer must support the same standard in order for the
monitor’s power management function to work.
DPMS: DISPLAY POWER MANAGEMENT SIGNALING
DMPM: DIGITAL MONITOR POWER MANAGEMENT
*
1
When PN-ZR01 (optional), or PN-ZB02 (optional) is not
connected.
*
2
When “AUTO INPUT CHANGE” is set to “OFF”.
1 - 7. POWER LIMITED
Set to ensure maximum power consumption.
3Refer to page 1 - 1 "1 - 1. OUTLINE".
1 - 8. DDC (PLUG AND PLAY)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and com-
puters. Information about resolution and other parameters is exchanged
between the two. This function can be used if the computer supports
between the two. This function can be used if the computer supports
DDC and it has been configured to detect plug-and-play monitors.
There are several types of DDC, depending on the communication
method used. This monitor supports DDC2B.
method used. This monitor supports DDC2B.
1 - 9.
SUPPLIED ACCESSORIES (PN-V602)
Screen resolution
Frequency
DVI-D
*2
HDMI
Component
*2
1920 x 1080p
*1
24Hz
---
Yes
---
50Hz
Yes
Yes
Yes
59.94Hz
Yes
Yes
Yes
60Hz
Yes
Yes
Yes
1920 x 1080i
*1
50Hz
Yes
Yes
Yes
59.94Hz
Yes
Yes
Yes
60Hz
Yes
Yes
Yes
1280 x 720p
50Hz
Yes
Yes
Yes
59.94Hz
Yes
Yes
Yes
60Hz
Yes
Yes
Yes
720 x 576p
50Hz
Yes
Yes
Yes
720 x 480p
59.94Hz
Yes
Yes
Yes
60Hz
Yes
Yes
Yes
640 x 480p (VGA)
59.94Hz
Yes
Yes
---
60Hz
Yes
Yes
---
720 (1440) x 576
50Hz
---
Yes
Yes
720 (1440) x 480i
59.94Hz
---
Yes
Yes
60Hz
---
Yes
Yes
DPMS
Screen
Power
consumption
*
Hsync
Vsync
ON STATE
Display
510W
Yes
Yes
STANDBY
No
display
1.0W
*2
No
Yes
SUSPEND
Yes
No
OFF STATE
No
No
DMPM
Screen
Power
consumption
*
Monitor ON
Display
510W
Active OFF
No display
1.0W
*2
MODE
Power consumption
MODE2
195 W
MODE1
310 W
OFF
510 W
Power cord: 1
CD-ROM (Utility Disk for Windows): 1
Setup manual: 1
Protection cover: 4
Handle screw (short): 4
Handle screw (short): 4
Bezel sheet (long/short): 2 each
Bezel sheet attachment instructions: 1
Cable clamp: 2
* Sharp Corporation holds authorship rights to the Utility Disk
program. Do not reproduce it without permission.
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-V602 OUTLINE OF THE PRODUCT
1 – 6
1 - 10. LAYOUT OF TERMINAL PINS
■ PC/AV DVI-D INPUT TERMINAL PINS
■ RS-232C INPUT TERMINAL PINS
■ RS-232C OUTPUT TERMINAL PINS
■ PC D-SUB INPUT TERMINAL PINS
■ PC/AV DVI-D OUTPUT TERMINAL PINS
■ PC/AV HDMI INPUT TERMINAL PINS
No.
Function
No.
Function
1
TMDS data 2-
13
N.C.
2
TMDS data 2+
14
+5V
3
TMDS data 2/4 shield
15
GND
4
N.C.
16
Hot-plug detection
5
N.C.
17
TMDS data 0-
6
DDC clock
18
TMDS data 0+
7
DDC data
19
TMDS data 0/5 shield
8
N.C.
20
N.C.
9
TMDS data 1-
21
N.C.
10
TMDS data 1+
22
TMDS clock shield
11
TMDS data 1/3 shield
23
TMDS clock+
12
N.C.
24
TMDS clock-
No.
Function
No.
Function
1
N.C.
6
N.C.
2
Transmitted data
7
N.C.
3
Received data
8
N.C.
4
N.C.
9
N.C.
5
GND
No.
Function
No.
Function
1
N.C.
6
N.C.
2
Received data
7
N.C.
3
Transmitted data
8
N.C.
4
N.C.
9
N.C.
5
GND
(DVI-D 24 PIN)
(D-SUB 9 PIN)
(D-sub 9 PIN)
No.
Function
No.
Function
1
Red video signal input
9
+5V
2
Green video signal input
10
GND
3
Blue video signal input
11
N.C.
4
N.C.
12
DDC data
5
GND
13
Hsync signal input
6
GND for red video signal
14
Vsync signal input
7
GND for green video signal
15
DDC clock
8
GND for blue video signal
No.
Function
No.
Function
1
TMDS data 2-
13
N.C.
2
TMDS data 2+
14
+5V
3
TMDS data 2/4 shield
15
GND
4
N.C.
16
Hot-plug detection
5
N.C.
17
TMDS data 0-
6
DDC clock
18
TMDS data 0+
7
DDC data
19
TMDS data 0/5 shield
8
N.C.
20
N.C.
9
TMDS data 1-
21
N.C.
10
TMDS data 1+
22
TMDS clock shield
11
TMDS data 1/3 shield
23
TMDS clock+
12
N.C.
24
TMDS clock-
No.
Function
No.
Function
1
TMDS data 2+
11
TMDS clock shield
2
TMDS data 2 shield
12
TMDS clock-
3
TMDS data 2-
13
CEC
4
TMDS data 1+
14
N.C.
5
TMDS data 1 shield
15
SCL
6
TMDS data 1-
16
SDA
7
TMDS data 0+
17
DDC/CEC GND
8
TMDS data 0 shield
18
+5V
9
TMDS data 0-
19
Hot-plug detection
10
TMDS clock+
(Mini D-SUB 15 PIN)
(DVI-D 24 PIN)
(HDMI CONNECTOR)
TM
Click on the first or last page to see other PN-V602 (serv.man6) service manuals if exist.