Sharp PN-U473 Handy Guide ▷ View online
CONFIDENTIAL
PN-U423/U473/U553 Installation Guidelines <Rev1.1> March 2014
8
Precautions for vibration, inclination, voltage, residual images and expansion
-This information display is not designed for the usage in any
places which have strong vibrations, such as inside motor
vehicles.
places which have strong vibrations, such as inside motor
vehicles.
-If the monitors will be used in the place which has the possibility
of even small vibration like railway station’s platform, shock
absorber must be considered.
of even small vibration like railway station’s platform, shock
absorber must be considered.
About vibration
About inclination
-Installing with inclination more than 20 degrees is impossible.
-Installing horizontally is impossible.
-Unable to install this product horizontally
About power supply and voltage
-Please use certainly the attached or designated power cord.
Attached power cord is three pin for 100V level.
Attached power cord is three pin for 100V level.
For 200V(50/60Hz) level, provided service parts
(QACCJA104WJPZ) (with change)
About residual images
-When a still image is being displayed for a long period, image
retention might occur.
retention might occur.
-Image retention can be removed by displaying motion images
or turning off the monitor. However, the longer the still image is
being displayed, the harder to remove the image retention,
therefore, the solutions mentioned above should be taken
periodically.
or turning off the monitor. However, the longer the still image is
being displayed, the harder to remove the image retention,
therefore, the solutions mentioned above should be taken
periodically.
About expansion
-When using acrylic or polycarbonate protection panel, please be
aware of expansion due to heat or moisture absorption.
aware of expansion due to heat or moisture absorption.
Acrylic protection panel can expand about 0.4%(about 5.0 mm in
“55” inch, 4.3 mm in “47” inch, 3.9 mm in “42” inch) when
absorbing the moisture.
“55” inch, 4.3 mm in “47” inch, 3.9 mm in “42” inch) when
absorbing the moisture.
Please fix the protection panel not to strain it by expansion.
CONFIDENTIAL
PN-U423/U473/U553 Installation Guidelines <Rev1.1> March 2014
9
*You can’t switch between LAN and RS-232C by command.
When installing , please choose LAN or RS-232C on OSD menu
in advance.
Precautions for connection
About RS-232C / LAN
-Personal computer can control some function(ex. power
on/off) with RS-232C or LAN. Please connect RS-232C or
LAN in advance when installing the displays in height
location and so on. It helps when maintaining the displays.
on/off) with RS-232C or LAN. Please connect RS-232C or
LAN in advance when installing the displays in height
location and so on. It helps when maintaining the displays.
*
About cable
- In analog connection by D-sub15, image quality is
potentially influenced by a video board or cable. And it needs
all displays adjustment when installing.
potentially influenced by a video board or cable. And it needs
all displays adjustment when installing.
-Please recommend digital connection(ex. HDMI, DVI,
DisplayPort connection) when customers want high quality
images. Image quality is potentially influenced by a video
board or cable. Therefore, please check the image quality
with connection in advance.
DisplayPort connection) when customers want high quality
images. Image quality is potentially influenced by a video
board or cable. Therefore, please check the image quality
with connection in advance.
-when extending the cable with optical cable, it may occur not
to read in EDID accurately. If not read in EDID accurately,
monitors cannot display accurately. Therefore, please check
the image quality with connection in advance when using
these devices.
to read in EDID accurately. If not read in EDID accurately,
monitors cannot display accurately. Therefore, please check
the image quality with connection in advance when using
these devices.
About peripheral equipment
-When using the image recorder(ex. Personal computer, DVD
player) or peripheral equipment(ex. distributor, video switching
unit), please check the operation with connection in advance.
player) or peripheral equipment(ex. distributor, video switching
unit), please check the operation with connection in advance.
About DVI-D output terminal
-It is possible to output the images of DVI-I(digital signal)
input to external device via DVI-D output terminal.
input to external device via DVI-D output terminal.
-When outputting the encoded images by HDCP, please use
the external device with HDCP
the external device with HDCP
- It is possible to connect the monitors and display the same
images via DVI input/output terminal(up to 5).
images via DVI input/output terminal(up to 5).
CONFIDENTIAL
PN-U423/U473/U553 Installation Guidelines <Rev1.1> March 2014
10
Precautions for space between displays
(multi-display)
About thermal influence
-In particular, when monitors are installed one above the
other, the temperature raise of topside monitor cause of the
exhaust heat from downside monitor.
Regarding the countermeasure against temperature, Please
keep the clearance in P.3.
In fact, when installing multi-display, it is hard to keep the
clearance in P.3. Therefore, please keep the temperature
requirements to do the countermeasures as below.
other, the temperature raise of topside monitor cause of the
exhaust heat from downside monitor.
Regarding the countermeasure against temperature, Please
keep the clearance in P.3.
In fact, when installing multi-display, it is hard to keep the
clearance in P.3. Therefore, please keep the temperature
requirements to do the countermeasures as below.
1) Reduce the surrounding temperature(using an air-
conditioner)
conditioner)
2)Get down the brightness(when a brightness gets down, a
power consumption and heat gets down)
power consumption and heat gets down)
3)Keep much clearance between the monitors
4)Flow the air forcibly between monitors
It is effective to use the spot cooler or fan in the back(when
the monitors catch the wind, they are easily attached the
dust).
It is effective to use the spot cooler or fan in the back(when
the monitors catch the wind, they are easily attached the
dust).
About expansion
The cabinet and frame of the information display is expanded
due to heat.
due to heat.
It is necessary to reserve enough space when aligning
multiple displays.
multiple displays.
If the space between displays is small, the weight is loaded
to LCD panel by heat expansion.
to LCD panel by heat expansion.
It is necessary to increase the gap when Installing more large
display. (Standard about 5 mm)
display. (Standard about 5 mm)
Hiding the gap between the bezels
Black tape
Please be sure the wind as much as
possible so as to pass through, not
choked .
possible so as to pass through, not
choked .
If the gap between displays spoils appearance (e. g. back of
the display can been seen through), please hide it by affixing
black tape at the rear.
the display can been seen through), please hide it by affixing
black tape at the rear.
Note: DO NOT seal the “exhalation fan and intake-nozzle” by
black tape.
black tape.
Please attach the tape before connecting cables.
It is necessary to check the tape periodically to make sure
that the tape isn’t detached from the display as time goes by.
that the tape isn’t detached from the display as time goes by.
monitor
CONFIDENTIAL
PN-U423/U473/U553 Installation Guidelines <Rev1.1> March 2014
before
after
11
Precautions for space between displays
(Case Study)
Please reserve enough space between
display and stick blind sheet up on the wall.
display and stick blind sheet up on the wall.
Please reserve enough space on all sides.
Adding a cooling fan to
exhaust the a warm air.
exhaust the a warm air.
Build a slit at the front to
inhale the cold air
inhale the cold air
into the rear.
More space
Click on the first or last page to see other PN-U473 service manuals if exist.