DOWNLOAD Sharp PN-S525 Service Manual ↓ Size: 195.51 KB | Pages: 2 in PDF or view online for FREE

Model
PN-S525
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
195.51 KB
Type
PDF
Document
Handy Guide
Brand
Device
Monitor / Service information
File
pn-s525.pdf
Date

Sharp PN-S525 Handy Guide ▷ View online

Preparation for despatch 
After the unit has been tested and confirmed as working, you need to load the model specific 
application – Service Tool 
If you are unfamiliar with the application or have not yet installed the program, please refer to the 
operation manual provided with the “Service Tool” application. 
Only if you have replaced the I/F PWB or the EEPROM, you will need to re-write ALL data (O). 
 
 
Write the “Firmware” to the display 
Run – Main Firmware 
 
If the unit has an OPTION BOARD fitted, write the “PN-ZBxx Firmware” 
Run – PN-ZBxx Firmware 
 
For PN-L units, write the “Touch Panel Firmware” to the display 
Run – TouchPanel FIrmware 
 
Reset the unit 
Check the service manual and perform a factory reset 
 
Write the “Usage Time” of the display 
Run – Usage Time 
 
For PN-V units, reset the “Bright Reset” settings on the unit 
Run – Panel Data Reset 
 
If required, write the “White balance” settings for the display (O) 
Run – White Balance 
 
For PN-L units If required, write the “Gamma” settings for the display (O) 
Run – Gamma 
 
If required, write the “Serial Number” of the display (O) 
Run – Serial Number 
 
If required, write the “Monitor Temperature” of the display (O) 
Run – Temp Watch 
 
If required perform “Flicker Adjustment” (O) 
Run – Flicker Adjustment 
 
Preparation for despatch 
After the unit has been tested and confirmed as working, you need to load the model specific 
application – Service Tool 
If you are unfamiliar with the application or have not yet installed the program, please refer to the 
operation manual provided with the “Service Tool” application. 
Only if you have replaced the I/F PWB or the EEPROM, you will need to re-write ALL data (O). 
 
 
Write the “Firmware” to the display 
Run – Main Firmware 
 
If the unit has an OPTION BOARD fitted, write the “PN-ZBxx Firmware” 
Run – PN-ZBxx Firmware 
 
For PN-L units, write the “Touch Panel Firmware” to the display 
Run – TouchPanel FIrmware 
 
Reset the unit 
Check the service manual and perform a factory reset 
 
Write the “Usage Time” of the display 
Run – Usage Time 
 
For PN-V units, reset the “Bright Reset” settings on the unit 
Run – Panel Data Reset 
 
If required, write the “White balance” settings for the display (O) 
Run – White Balance 
 
For PN-L units If required, write the “Gamma” settings for the display (O) 
Run – Gamma 
 
If required, write the “Serial Number” of the display (O) 
Run – Serial Number 
 
If required, write the “Monitor Temperature” of the display (O) 
Run – Temp Watch 
 
If required perform “Flicker Adjustment” (O) 
Run – Flicker Adjustment 
 
Preparation for despatch 
After the unit has been tested and confirmed as working, you need to load the model specific 
application – Service Tool 
If you are unfamiliar with the application or have not yet installed the program, please refer to the 
operation manual provided with the “Service Tool” application. 
Only if you have replaced the I/F PWB or the EEPROM, you will need to re-write ALL data (O). 
 
 
Write the “Firmware” to the display 
Run – Main Firmware 
 
If the unit has an OPTION BOARD fitted, write the “PN-ZBxx Firmware” 
Run – PN-ZBxx Firmware 
 
For PN-L units, write the “Touch Panel Firmware” to the display 
Run – TouchPanel FIrmware 
 
Reset the unit 
Check the service manual and perform a factory reset 
 
Write the “Usage Time” of the display 
Run – Usage Time 
 
For PN-V units, reset the “Bright Reset” settings on the unit 
Run – Panel Data Reset 
 
If required, write the “White balance” settings for the display (O) 
Run – White Balance 
 
For PN-L units If required, write the “Gamma” settings for the display (O) 
Run – Gamma 
 
If required, write the “Serial Number” of the display (O) 
Run – Serial Number 
 
If required, write the “Monitor Temperature” of the display (O) 
Run – Temp Watch 
 
If required perform “Flicker Adjustment” (O) 
Run – Flicker Adjustment 
 
Preparation for despatch 
After the unit has been tested and confirmed as working, you need to load the model specific 
application – Service Tool 
If you are unfamiliar with the application or have not yet installed the program, please refer to the 
operation manual provided with the “Service Tool” application. 
Only if you have replaced the I/F PWB or the EEPROM, you will need to re-write ALL data (O). 
 
 
Write the “Firmware” to the display 
Run – Main Firmware 
 
If the unit has an OPTION BOARD fitted, write the “PN-ZBxx Firmware” 
Run – PN-ZBxx Firmware 
 
For PN-L units, write the “Touch Panel Firmware” to the display 
Run – TouchPanel FIrmware 
 
Reset the unit 
Check the service manual and perform a factory reset 
 
Write the “Usage Time” of the display 
Run – Usage Time 
 
For PN-V units, reset the “Bright Reset” settings on the unit 
Run – Panel Data Reset 
 
If required, write the “White balance” settings for the display (O) 
Run – White Balance 
 
For PN-L units If required, write the “Gamma” settings for the display (O) 
Run – Gamma 
 
If required, write the “Serial Number” of the display (O) 
Run – Serial Number 
 
If required, write the “Monitor Temperature” of the display (O) 
Run – Temp Watch 
 
If required perform “Flicker Adjustment” (O) 
Run – Flicker Adjustment 
 
Display

Sharp PN-S525 Handy Guide ▷ Download

  • DOWNLOAD Sharp PN-S525 Service Manual ↓ Size: 195.51 KB | Pages: 2 in PDF or view online for FREE
  • Here you can View online or download the Handy Guide for the Sharp PN-S525 in PDF for free, which will help you to disassemble, recover, fix and repair Sharp PN-S525 Monitor. Information contained in Sharp PN-S525 Handy Guide (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.