PN-S525 (serv.man5) — Sharp Monitor User Guide / Operation Manual

Model
PN-S525 (serv.man5)
Pages
29
Size
4.2 MB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Monitor
File
pn-s525-sm5.pdf
Date

View Sharp PN-S525 (serv.man5) User Guide / Operation Manual online

PN-S525
LCD MONITOR 
 
 
OPERATION GUIDE 
2
E
This guide contains instructions regarding operation, settings, and similar details.
For instructions regarding connection and installation, refer to the included Operation Manual.
Manual Scope
-  Microsoft, Windows and Internet Explorer are registered trademarks of Microsoft Corporation.
-  HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing 
LLC.
-  Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United 
States and/or other countries.
-  This product comes with RICOH Bitmap Fonts produced and sold by RICOH COMPANY, LTD.
-  All other brand and product names are trademarks or registered trademarks of their respective holders.
-  Language of OSD menu used in this manual is English by way of example.
-  Illustrations in this manual may not exactly represent the actual product or display.
-  This manual assumes use in horizontal orientation, except where specifically noted.
Contents
Basic Operation ...............................................................3
Menu Items .......................................................................5
Displaying the menu screen .........................................5
Menu item details .........................................................6
Adjustments for PC screen display ............................10
Initialization (Reset)/Functional Restriction Setting ...11
Controlling the Monitor with a PC (RS-232C) ..............12
PC connection ............................................................12
Communication conditions .........................................12
Communication procedure .........................................12
RS-232C command table ...........................................16
Controlling the Monitor with a PC (LAN) .....................21
Settings to connect to a LAN ......................................21
Controlling with a PC ..................................................23
3
E
Basic Operation

8
1. INPUT (Input mode selection)
The menu is displayed. Press 
 or 
 to select the input 
mode, and press 
 to enter.
*  You can select the input terminal by pressing the input 
switch of the monitor.
Input mode
Video
Audio
PC1 DVI-D
*1
PC1 input terminal
PC audio input 
terminal
PC2 HDMI
*2
PC2 input terminal
PC3 D-SUB
PC3 input terminal
PC4 RGB
*3
PC4 input terminals
AV1 DVI-D
*1
AV1 input terminal
AV audio input 
terminals
AV2 HDMI
*2
AV2 input terminal
AV3 COMPONENT
*3
AV3 input terminals
AV4 S-VIDEO
AV4 input terminal
AV5 VIDEO
AV5 input terminal
*1  Select the terminal for DVI SELECT. (See page 7.)
*2  Select the terminal for HDMI SELECT. (See page 7.) 
Select the terminal for HDMI AUDIO SELECT which is 
used for audio input. (See page 7.)
*3  Select the terminal for BNC SELECT. (See page 7.)
2. MUTE
Turns off the volume temporarily.
Press the MUTE button again to turn the sound back to the 
previous level.
3. MENU
Displays and turns off the menu screen (see page 5).
4. VOL +/- (Volume adjustment)
Pressing 
 or 
 displays the VOLUME menu when the 
menu screen is not displayed.
V O L U M E  
15
Press 
 or 
 to adjust the volume of the sound.
*  If you do not press any buttons for about 4 seconds, the 
VOLUME menu automatically disappears.
5. BRIGHT +/- (Backlight adjustment)
Pressing 
 or 
 displays the BRIGHT menu when the 
menu screen is not displayed.
B R I G H T  
15
Press 
 or 
 to adjust the brightness.
*  If you do not press any buttons for about 4 seconds, the 
BRIGHT menu automatically disappears.
6. SIZE (Screen size selection)
The menu is displayed.
Press 
 or 
 to select the screen size. (See page 4.)
7. DISPLAY
Displays monitor information. Every time you press this button, 
the display changes from INFORMATION 1 →  
INFORMATION 2 → display clear and so on.
INPUT MODE 
SIZE 
COLOR MODE 
BRIGHT 
VOLUME 
ID No. 
MODEL 
S/N 
STATUS 
PC3 D-SUB
WIDE
STD
15
15
0
PN-S525
XXXX-XXXX-XXXX-XXXX








1 9 2 0 x 1 0 8 0  
LAN 
INFORMATION 1 
XXXX/XX/XX XXX
XX:XX:XX
V: 60 Hz    H: 66.3 kHz
RS-232C/LAN SELECT
DHCP CLIENT
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
MONITOR NAME
DATA PORT
MAC ADDRESS
LAN
OFF
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XXXXXXXXXXXX
XXXXX
XX-XX-XX-XX-XX-XX







1 9 2 0 x 1 0 8 0  
LAN 
INFORMATION 2 
V: 60 Hz    H: 66.3 kHz
XX:XX:XX
XXXX/XX/XX XXX
•  The display disappears automatically after about 15 
seconds.
• 
LAN
 is displayed during LAN communication.
•  If 
LAN
 is displayed in red, there is a duplicate IP address.
8. MODE (Color mode selection)
Each time you press this button, the color mode changes in 
the following order:
STD (Standard) → VIVID → sRGB → STD...
•  sRGB applies to PC input only.
  sRGB is international standard of color representation 
specified by IEC (International Electrotechnical 
Commission). Color conversion is made in taking account 
of liquid crystal’s characteristics and represents color tone 
close to its original image.
E
4
Basic Operation
n
Switching the screen size
Even when the screen size is changed, the display may remain the same depending on the input signal.
WIDE
PC input
Displays image so it fills the entire screen.
AV input
An image with a 4:3 aspect ratio is stretched to fill the entire 
screen.
ZOOM 1
PC input
An image with a 4:3 aspect ratio is enlarged to fill the entire screen 
without changing the aspect ratio. The edges of the image may be 
cut off.
AV input
ZOOM 2
PC input
Use this size if ZOOM 1 cuts off the subtitles.
AV input
NORMAL
PC input
Displays image so it fills the screen without changing the aspect 
ratio of the input signals.
AV input
Displays the entire image of the aspect ratio of 4:3 without 
changing the aspect ratio.
Dot by Dot
PC input
Displays the dots of the signals input from the connected PC as 
the corresponding dots on the screen. *
AV input
Displays the dots of the input signals as the corresponding dots on 
the screen.
*:  With a monitor of screen resolution 1600 x 1200 or 1920 x 1200, selecting Dot by Dot displays the NORMAL screen.
TIPS
•  Using this monitor’s screen-size switching or dual-screen display functions to compress or expand the screen for commercial 
or public viewing in establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright 
Law, so please be careful.
•  When “Enlarge” is set, the screen size is fixed to “WIDE” mode.
•  When dual-screen display is selected, the screen size cannot be changed.
•  The appearance of the original video may change if you select a screen size with a different aspect ratio than the original 
image (e.g. TV broadcast or video input from external equipment). 
•  When an ordinary non-wide image (4:3) is viewed with the whole screen using the screen-size switching function of this 
monitor, the edge of the image may be lost or appear distorted. If you wish to respect the creator’s intentions, set the screen 
size to “NORMAL”.
•  When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen 
size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the 
edges of the screen. This is due to the characteristics of the software, and is not a malfunction.
•  Depending on the original image size, black bands may remain at the edges of the screen.
Page of 29
Display

Download Sharp PN-S525 (serv.man5) User Guide / Operation Manual

Here you can view online or download Sharp PN-S525 (serv.man5) User Guide / Operation Manual in pdf. This User Guide / Operation Manual can help you recover, restore, fix, disassemble and repair Sharp PN-S525 (serv.man5) Monitor. Information contained in Sharp PN-S525 (serv.man5) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).