Sharp PN-R603 (serv.man5) Service Manual ▷ View online
PN-R903/R703/R603 OUTLINE OF THE PRODUCT
1 – 1
CHAPTER 1. OUTLINE OF THE PRODUCT
1. SPECIFICATIONS
1 - 1. OUTLINE
Model
PN-R903
PN-R703
PN-R603
LCD component
90” Class [90-1/16 inch (228.7cm)
diagonal]
TFT LCD
diagonal]
TFT LCD
70" Class [69-1/2 inch
(176.6cm)diagonal]
TFT LCD
(176.6cm)diagonal]
TFT LCD
60” Class [60-1/16 inch
(152.5cm) diagonal]
TFT LCD
(152.5cm) diagonal]
TFT LCD
Max. resolution (pixels)
1920 x 1080
Max. colors
Approx. 1.06 billion colors
Pixel pitch (H) x (V)
1.038 mm x 1.038 mm
0.802mm x 0.802mm
0.692 mm x 0.692 mm
Viewing angle
176° right/left/up/down (contrast ratio>10)
Screen active area inch (mm)
78-7/16 x 44-1/8
(1993.0 x 1121.0)
(1993.0 x 1121.0)
60-9/16 x 34-1/16
(1538.9 x 865.6)
(1538.9 x 865.6)
52-5/16 x 29-7/16
(1329.1 x 747.6)
(1329.1 x 747.6)
Computer input signal
n
Digital (DVI 1.0 standard-compliant)
n
Analog RGB (0.7 Vp-p) [75
]
n
DisplayPort 1.1
Sync signal
n
Horizontal/vertical separate (TTL: positive/negative)
n
Sync-on-green
*1
n
Composite sync (TTL: positive/negative)
*1
Video color system
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play
VESA DDC2B
Power management
n
VESA DPMS
n
DVI DMPM
Input terminals
PC/AV
n
HDMI x 2
n
Mini D-SUB 15 pin, 3 rows x 1
PC
n
DisplayPort x 1
n
DVI-I 29 pin (HDCP compatible) x 1
Audio
n
3.5 mm mini stereo jack x 1
Serial (RS-232C)
n
D-SUB 9 pin x 1
Output terminals
PC
n
DisplayPort x 1
n
DVI-D 24 pin (HDCP compatible) x 1
Audio
n
3.5 mm mini stereo jack x 1
Serial (RS-232C)
n
D-SUB 9 pin x 1
LAN terminal
10 BASE-T/100 BASE-TX
Speaker output
10 W + 10 W
Power requirement
AC100 V - 240 V,
7.5 A,
50/60 Hz
7.5 A,
50/60 Hz
AC 100 - 240 V,
3.0 - 1.2 A,
50/60Hz
3.0 - 1.2 A,
50/60Hz
AC100 V - 240 V,
2.3 A - 1.0A,
50/60 Hz
2.3 A - 1.0A,
50/60 Hz
Operating temperature
*2
32°F to 104°F (0°C to 40°C)
Operating humidity
20% to 80% (no condensation)
Power consumption (maximum/input signal waiting
mode
mode
*3
/standby mode
*4
)
660 W/1.4 W/1.4 W
270 W (1.4 W / 1.4 W)
200W/1.4 W/1.4 W
Dimensions (excluding protrusions) inch (mm)
Approx. 80-7/8 (W) x
4-13/16 (D) x 47-1/8 (H) (2055 x
122 x 1197)
4-13/16 (D) x 47-1/8 (H) (2055 x
122 x 1197)
Approx. 62-1/8 (W) x
1-9/16 (D) x36-1/16 (H)
(1578 x 39.4 x 916)
1-9/16 (D) x36-1/16 (H)
(1578 x 39.4 x 916)
Approx. 54-1/4 (W) x
1-9/16 (D) x 31-1/4 (H)
(1,378 x 39.4 x 794)
1-9/16 (D) x 31-1/4 (H)
(1,378 x 39.4 x 794)
Weight lbs. (kg)
Approx. 165.3 (75)
(excluding the temporary stand
used in the packagefor transporta-
tion)
(excluding the temporary stand
used in the packagefor transporta-
tion)
Approx. 94.8 (43)
Approx. 70.5 (32)
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-R903/R703/R603 OUTLINE OF THE PRODUCT
1 – 2
*
1
D-Sub input terminal only
*
2
Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such
cases, please check the temperature condition specified by the optional equipments.
cases, please check the temperature condition specified by the optional equipments.
3
When AUTO INPUT CHANGE is set to OFF.
*
*
4
When “STANDBY MODE” is set to “STANDARD”. When “STANDBY MODE” is set to “LOW POWER”: 0.5W
1 - 2. DIMENSIONAL DRAWINGS
■ PN-R903
■ PN-R603
■ PN-R703
*
Note that the values shown are approximate values.
When mounting the monitor, be sure to use a wall-mount bracket.
SHARP recommends using M6 screws and tighten the screws.
Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting inserious personal injuries as
well as damage to the product. The screw and hole should come together with over 5/16 inch(8 mm) length of thread. Use a bracket which has
been approved for UL1678 standard, and which can endure at least 4 times or more the weight of the monitor.
Don’t use the impact driver.
SHARP recommends using M6 screws and tighten the screws.
Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting inserious personal injuries as
well as damage to the product. The screw and hole should come together with over 5/16 inch(8 mm) length of thread. Use a bracket which has
been approved for UL1678 standard, and which can endure at least 4 times or more the weight of the monitor.
Don’t use the impact driver.
36-1/16 [916]
62-1/8 [1578]
1-9/16
[39.4]
[39.4]
7
/16
[1
1.2]
7
-7
/8
[200]
7-7/8
[200]
[200]
7-7/8
[200]
[200]
Unit: inch [mm]
VESA holes *
Opening width(60-11/16 [1541])
Opening height (34-1/2 [
8
77
])
3-15/16
[100]
3-15/16
[100]
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-R903/R703/R603 OUTLINE OF THE PRODUCT
1 – 3
1 - 3. COMPATIBLE SIGNAL TIMING (PC)
*
1
Displays a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down to panel size then displayed.
*
All are compliant only with non-interlaced.
*
Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input.
*
The frequency values for the Sun are reference values.
Screen resolution
Hsync
Vsync
Dot frequency
Digital
Analog
(D-SUB/RGB)
DVI-I
HDMI
DisplayPort
VESA
640 x 480
31.5kHz
60Hz
25.175MHz
Yes
Yes
Yes
Yes
37.9kHz
72Hz 31.5MHz Yes
Yes
Yes
Yes
37.5kHz
75Hz 31.5MHz Yes
Yes
Yes
Yes
800 x 600
35.1kHz
56Hz
36.0MHz
---
---
Yes
37.9kHz
60Hz 40.0MHz Yes
Yes
Yes
Yes
48.1kHz
72Hz 50.0MHz Yes
Yes
Yes
Yes
46.9kHz
75Hz 49.5MHz Yes
Yes
Yes
Yes
848 x 480
31.0kHz
60Hz
33.75MHz
Yes
---
Yes
1024 x 768
48.4kHz
60Hz
65.0MHz
Yes
Yes
Yes
Yes
56.5kHz
70Hz 75.0MHz Yes
Yes
Yes
Yes
60.0kHz
75Hz 78.75MHz Yes
Yes
Yes
Yes
1152 x 864
67.5kHz
75Hz
108.0MHz
Yes
Yes
Yes
Yes
1280 x 768
47.8kHz
60Hz
79.5MHz
Yes
---
Yes
Yes
60.3kHz
75Hz 102.25MHz Yes
---
Yes
Yes
1280 x 800
49.7kHz
60Hz
83.5MHz
Yes
Yes
Yes
Yes
1280 x 960
60.0kHz
60Hz
108.0MHz
Yes
Yes
Yes
Yes
1280 x 1024
64.0kHz
60Hz
108.0MHz
Yes
Yes
Yes
Yes
80.0kHz
75Hz 135.0MHz Yes
Yes
Yes
Yes
1360 x 768
47.7kHz
60Hz
85.5MHz
Yes
Yes
Yes
Yes
1400 x 1050
65.3kHz
60Hz
121.75MHz
Yes
Yes
Yes
Yes
1440 x 900
55.9kHz
60Hz
106.5MHz
Yes
---
Yes
Yes
1600 x 1200
*1
75.0kHz
60Hz 162.0MHz Yes
Yes
Yes
Yes
1680 x 1050
65.3kHz
60Hz
146.25MHz
Yes
Yes
Yes
Yes
1920 x 1200
*1
74.0kHz
60Hz
154.0MHz
Yes
Yes
Yes
Yes
Wide
1280 x 720
44.7kHz
60Hz
74.4MHz
Yes
Yes
Yes
Yes
1920 x 1080
66.3kHz
60Hz
148.5MHz
Yes
Yes
Yes
Yes
67.5kHz
US TEXT
720 x 400
31.5kHz
70Hz
28.3MHz
Yes
Yes
Yes
Yes
Sun 1024
x
768
48.3kHz
60Hz
64.13MHz ---
---
---
Yes
53.6kHz
66Hz 70.4MHz
---
---
---
Yes
56.6kHz
70Hz 74.25MHz
---
---
---
Yes
1152 x 900
61.8kHz
66Hz
94.88MHz
---
---
---
Yes
71.8kHz 76.2Hz
108.23MHz
---
---
---
Yes
1280 x 1024
71.7kHz
67.2Hz
117.01MHz
---
---
---
Yes
81.1kHz
76Hz 134.99MHz
---
---
---
Yes
1600 x 1000
68.6kHz
66Hz
135.76MHz
---
---
---
Yes
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-R903/R703/R603 OUTLINE OF THE PRODUCT
1 – 4
1 - 4. COMPATIBLE SIGNAL TIMING (AV)
1 - 5. POWER MANAGEMENT
This monitor conforms to VESA DPMS and DVI DMPM. Both your video
card and computer must support the same standard in order for the
monitor’s power management function to work.
card and computer must support the same standard in order for the
monitor’s power management function to work.
DPMS: DISPLAY POWER MANAGEMENT SIGNALING
DMPM: DIGITAL MONITOR POWER MANAGEMENT
*
1
When “AUTO INPUT CHANGE” is set to “OFF”.
1 - 6. POWER LIMITER(PN-R903)
Set to ensure maximum power consumption.
1 - 7. DDC (PLUG AND PLAY)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and com-
puters. Information about resolution and other parameters is exchanged
between the two. This function can be used if the computer supports
DDC and it has been configured to detect plug-and-play monitors.
There are several types of DDC, depending on the communication
method used. This monitor supports DDC2B.
DDC is a signal standard for plug and play between monitors and com-
puters. Information about resolution and other parameters is exchanged
between the two. This function can be used if the computer supports
DDC and it has been configured to detect plug-and-play monitors.
There are several types of DDC, depending on the communication
method used. This monitor supports DDC2B.
Screen resolution
Frequency
HDMI
Component
1920 x 1080p
24Hz
Yes
---
50Hz
Yes
Yes
59.94Hz
Yes
Yes
60Hz
Yes
Yes
1920 x 1080i
50Hz
Yes
Yes
59.94Hz
Yes
Yes
60Hz
Yes
Yes
1280 x 720p
50Hz
Yes
Yes
59.94Hz
Yes
Yes
60Hz
Yes
Yes
720 x 576p
50Hz
Yes
Yes
720 x 480p
59.94Hz
Yes
Yes
60Hz
Yes
Yes
640 x 480p (VGA)
59.94Hz
Yes
---
60Hz
Yes
---
720 (1440) x 576i
50Hz
Yes
Yes
720 (1440) x 480i
59.94Hz
Yes
Yes
60Hz
Yes
Yes
DPMS
Screen
Power
consumption
Hsync
Vsync
ON STATE
Display
PN-R903: 660W
PN-R703:270W
PN-R603: 200W
PN-R703:270W
PN-R603: 200W
Yes
Yes
STANDBY
No
display
1.4W
*1
No
Yes
SUSPEND
Yes
No
OFF STATE
No
No
DMPM
Screen
Power
consumption
Monitor ON
Display
PN-R903: 660W
PN-R703:270W
PN-R603: 200W
PN-R703:270W
PN-R603: 200W
Active OFF
No display
1.4W
*1
MODE
PN-R903
MODE2
340W
MODE1
410W
OFF
660W