Sharp PN-L802B Handy Guide ▷ View online
PN-L802B Installation Guidelines <Rev1.0> February 2012
CONFIDENTIAL
Carrying Package
8
Precautions for carrying 1
Carrying the display with wheeled platform needs at least
4 people. Hold each side of display with 2, and hold front
and rear sides with 2.
- Please carry package with a pallet by forklift or hand-lift.
- If you can’t use those machineries, please remove the display from package and carry it with wheeled platform.
（
Removing display needs at least 6 people, and carrying with wheeled platform needs at least 4 people.)
Please do not carry this display with portrait orientation.
Please carry it with landscape orientation.
×
Please do not carry
this display with
portrait orientation.
Wheeled platform
Width
(mm)
Height
(mm)
Depth
(mm)
Weight
(kg)
Package
468
1,452
2,100
About 140
Only main body
135
1,157
1,880
About 102
Please carry package with forklift or hand-lift.
＜
Caution＞
An accompanying stand is for temporary use
until this display is installed properly. The
temporary stand can’t be used for permanent use.
until this display is installed properly. The
temporary stand can’t be used for permanent use.
Hand -lift
＜
Main body size＞
PN-L802B Installation Guidelines <Rev1.0> February 2012
CONFIDENTIAL
Edge of
the body
Entrance
location
Package
Main body
Depth
Width
Depth
Width
45°
0
1,900 1,900 1,500
1,500
150
1,900 2,000 1,500
1,700
250
1,900 2,100 1,500
1,800
Using elevator
9
Precautions for carrying 2
The space to carry in
Enough space in an elevator is necessary to carry the display with it.
Caution : Please do not hit package or the main body to the entrance or
bottom of elevator.
※
In case the arrangement angle is 0°,
the same size frontage with carrier is necessary. 【mm】
Following to the image and the list below, please check the angle
and the size of an elevator in case there isn’t enough depth.
and the size of an elevator in case there isn’t enough depth.
Depth
: The depth of an elevator
Width
: The width of an elevator
Frontage
: The size of frontage of an
elevator
Entrance location : The distance between the side
of an elevator and the frontage
Arrangement angle: The angle of the main body to
arrange it in an elevator
The main body
Width
Depth
Angle of the main body
Frontage
Location of entrance
PN-L802B Installation Guidelines <Rev1.0> February 2012
CONFIDENTIAL
The space to carry in
10
Precautions for carrying 3
1. The space to carry in
Please carry the main body with wheeled platform to the installation place.
The following space is necessary to pass through with wheeled platform
（
wheeled platform size : Width : 300mm or less, Height : 150mm or less）
2. The space of corners
When there is a corner on the carrying course, more
than 1,200mm/1,000mm width(Package/only the
main body) is necessary.
Caution : Please do not hit the side of package to the corner.
wall
wall
wall
The main body
wall
wall
Ceiling
wheeled platform
Width
Height
Package
500mm or more
1,650mm or more
Only the main body
300mm or more
1,400mm or more
Space
Package
1,200mm or more
Only the main body
1,000mm or more
Package : 1,200mm
Only the main body : 1,000mm
Only the main body : 1,000mm
Package : 1,650mm
Only the main body : 1,400mm
Only the main body : 1,400mm
Package : 500mm
Only the main body : 300mm
（Width of wheeled platform ）
Only the main body : 300mm
（Width of wheeled platform ）
Package : 1,200mm
Only the main body : 1,000mm
Only the main body : 1,000mm
wall
PN-L802B Installation Guidelines <Rev1.0> February 2012
CONFIDENTIAL
Precautions for attachment
-Please take attention to the following items for using screw holes on the back of IDP.
1) Please use at least 4 mounting screws to fix the display.
2) Please use symmetrical screw holes across the centre line.
*It can cause malfunction or deformation of the display in case of using screw holes asymmetrically.
3)Please use a mounting bracket having less than or equal to 7.5mm hole diameter.
*Oversize of hole diameter can cause unfastening of the captive nut by the mounting screw.
4)Please use screws which is correct length written in the operation material of display.
*Over length of screw can cause unfastening of the captive nut by the mounting screw.
5)Please certainly take some kind of measures to prevent the screws loosening.
(For example : using screws with washer)
6) Please tighten screws hard within 3N*m strength.
(Tightening torque: 3N*m )
1) Please use at least 4 mounting screws to fix the display.
2) Please use symmetrical screw holes across the centre line.
*It can cause malfunction or deformation of the display in case of using screw holes asymmetrically.
3)Please use a mounting bracket having less than or equal to 7.5mm hole diameter.
*Oversize of hole diameter can cause unfastening of the captive nut by the mounting screw.
4)Please use screws which is correct length written in the operation material of display.
*Over length of screw can cause unfastening of the captive nut by the mounting screw.
5)Please certainly take some kind of measures to prevent the screws loosening.
(For example : using screws with washer)
6) Please tighten screws hard within 3N*m strength.
(Tightening torque: 3N*m )
- Please attach this product to brackets which SHARP recommend.
VESA compliant Mounting bracket for display (M6 screw)
VESA compliant screw holes
Screw holes
Length of screw : 8mm-10mm
Hole diameter for mounting bracket
(less than or equal to 7.5mm)
(less than or equal to 7.5mm)
Screw (M6)
Mounting bracket
Rear cover of display
Captive nut for
fixing
fixing
11
Click on the first or last page to see other PN-L802B service manuals if exist.