DOWNLOAD Sharp PN-L603A (serv.man7) Service Manual ↓ Size: 419.02 KB | Pages: 9 in PDF or view online for FREE

Model
PN-L603A (serv.man7)
Pages
9
Size
419.02 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Monitor / Panel Setting Tool
File
pn-l603a-sm7.pdf
Date

Sharp PN-L603A (serv.man7) User Manual / Operation Manual ▷ View online

4
E
Setting up the PC
Install
Caution
•  This can only be done by a user with administrator authority.
•  If an older version of the touch panel settings tool is installed, remove (uninstall) the old version before installing the touch 
panel settings tool. (See page 8.)
•  Do not touch the touch panel when connecting the USB cable.
  If you touch the touch panel, it will lead to a malfunction. In this case, disconnect and then reconnect the USB cable.
1.  Start your PC.
2.  Exit all applications that are running.
3.  Connect the USB cable.
After it has been connected, the touch panel will be automatically recognized.
 
To the USB terminal
of the PC
USB cable
USB 1 port*
USB 2 port*
*  To use a touch panel with a computer connected to the bottom, connect to the USB 1 port. 
To use a touch panel with a computer connected to the side, connect to the USB 2 port. 
(Factory setting. Can be changed in TOUCH INPUT SELECT in the SETUP menu.)
4.  Insert the supplied CD-ROM into the CD-ROM drive of your PC.
5.  Open the CD-ROM drive in “Computer”.
6.  Double-click the “TouchPanel” folder, and then double-click the “Windows” folder.
7.  Double-click “Setup.exe”.
  When the “User Account Control” screen appears, click “Yes” (or “Allow”).
8.  Select the language for installation, and click “Yes”.
Follow the on-screen instructions to install the driver.
•  If the “Windows Security” screen appears, click “Install” (or “Install this driver software anyway”).
•  If the “Software Installation” screen appears, click “Continue Anyway”.
•  If the “SHARP Touch Panel Settings Tool Files in Use” screen appears, click “Continue”.
9.  When the installation finished screen appears, click “Close”.
This completes the installation of the touch panel settings tool.
Each time the PC is started, the touch panel settings tool will start automatically to enable the touch panel to be used.
The first time you use the touch panel, perform calibration (position adjustment). (See page 6.)
5
E
Touch Panel Settings
The touch panel settings tool starts automatically. An icon (
) appears on the taskbar.
Caution
•  When using the touch panel, set the “SIZE” of the monitor to “WIDE”, “NORMAL”, or “Dot by Dot”. 
The touch panel cannot be used when the “SIZE” is set to “ZOOM1” or “ZOOM2”.
How to configure settings
1.  Click the touch panel settings tool icon (
) on the taskbar.
2.  Click a menu to change a setting.
•  Current Resolution 
: The current screen resolution appears.
•  Calibration 
: See page 6.
•  Properties 
: See page 6.
•  Hardware Information  :  Select to view operating conditions. (For service technicians.)
•  Version Information 
: Shows the version of this software.
•  Exit 
: Exit this software.
6
E
Calibration
Calibration is used to perform position alignment so that the mouse cursor moves to the correct position when the screen is 
touched.
Adjust
Calibration can be performed. Follow the on-screen instructions.
Reset
The calibration settings will be deleted.
Properties
Settings for the touch action can be configured.
n
Double Click Range Setting (Mouse Mode)
Set how much the position can shift between the first touch and the second touch and still be recognized as a double-click.  
To return the setting to the default setting, click “Default”.
TIPS
•  Changing this setting also changes the effective double-click range when the mouse is used.
n
Double Click Speed Setting (Mouse Mode)
Set the time that is recognized as a double-click. When a second touch occurs within the set time after the first touch, it is 
recognized as a double-click.
Speed Setting (Auto)
The inside of the frame can be touched twice (double-clicked) to set the speed automatically based on the interval between the 
touches.
Set Manually
The speed can be set manually from “Slow” (about 1 second) to “Fast” (about 0.3 seconds).
Test
When the inside of the frame is double-clicked by touching it twice, the screen changes. If the screen does not change, repeat 
the setting.
Default
Click to restore the default setting.
TIPS
•  Changing this setting also changes the mouse double-click speed of Windows.
•  Depending on the application software, changing the setting may not have any effect (for example, if the setting is set 
separately in the application).
Touch Panel Settings
7
E
Touch Panel Settings
n
Right-click Setting (Mouse Mode)
Recognize press and hold as right click
Set whether touching the screen continuously is used as a mouse right-click.
Press and Hold Duration
Set the time that is recognized as a mouse right-click.
Press and Hold Effective Range
Set the effective range for determination that the screen is being touched continuously.
n
Operation Setting
Touch Operation Mode
Select the touch mode (Mouse Mode or Multi-Touch Mode).
•  Mouse Mode 
: Touch information is output as mouse information.
•  Multi-Touch Mode : Touch information is output as digitizer information.
Page of 9
Display

Sharp PN-L603A (serv.man7) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp PN-L603A (serv.man7) Service Manual ↓ Size: 419.02 KB | Pages: 9 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp PN-L603A (serv.man7) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp PN-L603A (serv.man7) Monitor. Information contained in Sharp PN-L603A (serv.man7) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.