Sharp PN-G655E (serv.man5) User Manual / Operation Manual ▷ View online
ENGLISH
E
31
OPTION menu
Function
Command Direction
Parameter
Reply
Control/Response contents
*
DATE/TIME SETTING
DATE
WR
AABBCCDDEE
AABBCCDDEE
AA: Year, BB: Month, CC: Day, DD: Time, EE: Minute
Yes
SCHEDULE
SC01-
SC08
SC08
WR
ABCDEFFGGH
ABCDEFFGGH
Schedule of a specified number
A: Schedule
0 = Not effective, 1 = Effective
B: Power
0 = OFF, 1 = ON
C: Day of the week 1 0 = Only once, 1 = Every week, 2 = Every day
D: Day of the week 2 0 = Sunday, 1 = Monday through 6 = Saturday,
D: Day of the week 2 0 = Sunday, 1 = Monday through 6 = Saturday,
9 = Not exist
E: Day of the week 3 0 = Sunday, 1 = Monday through 6 = Saturday,
9 = Not exist
F: Time
00-23
G: Minute
00-59
H: Input
0 = Not specified, 1 = PC1/AV1, 2 = PC2,
3 = PC3/AV2, 4 = AV3
3 = PC3/AV2, 4 = AV3
Yes
DVI SELECT
DVSL
WR
0-1
0-1 0: PC (DIGITAL), 1: AV (DIGITAL)
Yes
BNC SELECT
BNSL
WR
0-1
0-1 0: PC (ANALOG), 1: AV (COMPONENT)
Yes
QUICK SHOOT (PC)
QSPC
WR
0-1
0-1 0: OFF, 1: ON
Yes
QUICK SHOOT (AV)
QSAV
WR
0-1
0-1 0: OFF, 1: ON
Yes
COLOR SYSTEM
CSYS
WR
0-5
0-5 0: AUTO, 1: PAL, 2: PAL-60, 3: SECAM, 4: NTSC3.58, 5: NTSC4.43
Yes
AUDIO OUTPUT
AOUT
WR
0-1
0-1 0: VARIABLE, 1: FIXED
Yes
INPUT
RESOLUTION
(PC)
RESOLUTION
(PC)
RESOLUTION
CHECK
CHECK
PXCK
R
- Returns current resolution in the form of hhh, vvv.
No
PIXEL SETTING
(PC2, PC3)
(PC2, PC3)
PXSL
WR
1
1 V: 768) 1360 x 768
2
2 V: 768) 1280 x 768
3
3 V: 768) 1024 x 768
5
5 V: 480) 848 x 480
6
6 V: 480) 640 x 480
INPUT
RESOLUTION
(AV)
RESOLUTION
(AV)
RESOLUTION
CHECK
CHECK
RESO
R
- 480i, 480p, 1080i, 720p, 1080p, VGA, etc.
No
SELF ADJUST
AADJ
WR
0-1
0-1 0: OFF, 1: ON
Yes
POWER MANAGEMENT
PMNG
WR
0-1
0-1 0: OFF, 1: ON
Yes
ENLARGE menu (When the input mode is PC)
Function
Command Direction
Parameter
Reply
Control/Response contents
*
ENLARGE MODE
EMAG
WR
0-4
0-4 0: OFF, 1: 2 x 2, 2: 3 x 3, 3: 4 x 4, 4: 5 x 5
No
BEZEL WIDTH
WIDTH OF THE
SHORTER SIDE
SHORTER SIDE
BEZH
WR
0-100
0-100
WIDTH OF THE
LONGER SIDE
LONGER SIDE
BEZV
WR
0-100
0-100
IMAGE POSITION (2 x 2)
EPOS
WR
0-3
0-3 See page 21.
IMAGE POSITION (3 x 3)
EPOS
WR
0-8
0-8
IMAGE POSITION (4 x 4)
EPOS
WR
0-15
0-15
IMAGE POSITION (5 x 5)
EPOS
WR
0-24
0-24
ENLARGE/IMAGE POSITION SETTING ESTG
WR
XXYY
XXYY XX: Enlarge mode (Same as EMAG), YY: Image Position (Same as
EPOS)
PIP/PbyP menu
Function
Command Direction
Parameter
Reply
Control/Response contents
*
PIP MODES
MWIN
WR
0-3
0-3 0: OFF, 1: PIP, 2: PbyP, 3: PbyP2
Yes
PIP SIZE
MPSZ
WR
1-12
1-12
Yes
PIP POS
THE LONGEST
DIRECTION
DIRECTION
MHPS
W
0-100
Yes
R
0-100
Yes
THE SHORTEST
DIRECTION
DIRECTION
MVPS
W
0-100
Yes
R
0-100
Yes
PIP V/H-POS
MPOS
W
0-100,0-100
Specify the position in MPOSxxxyyy format.
(xxx: Longer side, yyy: Shorter side position)
(xxx: Longer side, yyy: Shorter side position)
Yes
R
0-100,0-100 Returns a response in (xxx,yyy) format.
(xxx: Longer side, yyy: Shorter side position)
Yes
PIP BLEND
MWBL
WR
0-15
0-15
Yes
PIP SOURCE
MWIP
WR
1
1 PC1 DIGITAL
Yes
2
2 PC2 ANALOG
3
3 AV2 COMPONENT
4
4 AV3 VIDEO
6
6 PC3 ANALOG
7
7 AV1 DIGITAL
SOUND CHANGE
MWAD
WR
1-2
1-2 1: MAIN, 2: SUB
Yes
MAIN POS (Main screen)
MWPP
WR
0-1
0-1 0: POS1, 1: POS2
Yes
PbyP2 POS (Sub screen)
MW2P
WR
0-2
0-2 0: POS1, 1: POS2, 2: POS3
Yes
AUTO OFF
MOFF
WR
0-1
0-1 0: MANUAL, 1: AUTO
Yes
Controlling the Monitor with a PC
E
32
Initialisation/Functional Restriction Setting (FUNCTION) menu
Functio
Command Direction
Parameter
Reply
Control/Response contents
*
ALL RESET
RSET
W
0
No
ADJUSTMENT LOCK
ALCK
WR
0-2
0-2 0: OFF
Yes
OSD DISPLAY
LOSD
WR
0-1
0-1 0: ON, 1: OFF
Yes
LED
OFLD
WR
0-1
0-1 0: ON, 1: OFF
Yes
Others
Function
Command Direction
Parameter
Reply
Control/Response contents
*
SCREEN SIZE (PC)
WIDE
WR
1-5
1-5 1: WIDE, 2: NORMAL, 3: DotbyDot, 4: ZOOM1, 5: ZOOM2
Yes
SCREEN SIZE (AV)
WIDE
WR
1-5
1-5 1: WIDE, 2: ZOOM1, 3: ZOOM2, 4: NORMAL, 5: DotbyDot
Yes
VOLUME
VOLM
WR
0-31
0-31
Yes
MUTE
MUTE
WR
0-1
0-1 0: OFF, 1: ON
No
INFORMATION
MODEL
INF1
R
Value
Yes
SERIAL NO
SRNO
R
Value
BRIGHT
VLMP
WR
0-31
0-31 Brightness
Yes
TEMPERATURE SENSOR
DSTA
R
0 Internal temperature normal
Yes
1 Internal temperature abnormal (Standby mode)
2 Internal temperature abnormal (Temperature is normal now, but it was
2 Internal temperature abnormal (Temperature is normal now, but it was
abnormal during operation.)
3 Internal temperature abnormal (Brightness of the backlight decreases.)
4 Temperature sensor abnormal
4 Temperature sensor abnormal
TEMPERATURE ACQUISITION
ERRT
R
Value Temperature at temperature sensors 1 through 3 are returned in the
following forms:
[Sensor 1], [Sensor 2], [Sensor 3]
[Sensor 1], [Sensor 2], [Sensor 3]
Yes
CAUSE OF LAST STANDBY MODE
STCA
W
0
Initialisation
Yes
R
0 No detectable error has occurred
1 Standby mode by POWER button
2 Main power “OFF” by the main power switch
3 Standby mode by RS-232C
4 Waiting mode by No Signal (Incl: VESA DPMS/DMPM)
6 Standby mode by abnormal temperature
8 Standby mode by SCHEDULE setting
1 Standby mode by POWER button
2 Main power “OFF” by the main power switch
3 Standby mode by RS-232C
4 Waiting mode by No Signal (Incl: VESA DPMS/DMPM)
6 Standby mode by abnormal temperature
8 Standby mode by SCHEDULE setting
Controlling the Monitor with a PC
ENGLISH
33
E
Troubleshooting
Before calling for repair services, make sure following checks
for possible remedies to the encountered symptoms.
There is no picture or sound.
• Is the power cord disconnected? (See page 12.)
• Is the main power switch set to “OFF”? (See page 14.)
• Is the monitor in standby mode (the power LED illuminating
in orange)? (See page 14.)
• Make sure correct input mode is selected. (See page 15.)
• If any external equipment is connected, make sure the
equipment is operating (playing back).
Remote control does not work.
• Are the batteries inserted with polarity (+,-) aligned? (See
page 12.)
• Are the batteries exhausted? (See page 12.)
• Point the remote control unit toward the monitor’s remote
control sensor. (See page 12.)
• Is the menu display hidden or is operation disabled? (See
page 24.)
Sound from left and right speakers is reversed.
Sound is heard from only one side.
• Are audio cables connected properly? (See pages 10 and
11.)
• Make sure audio cables for external speakers are
connected properly: left and right cables may be reversed
or one of the two cables may not be connected. (See page
11.)
• Check the setting of BALANCE for AUDIO menu. (See
page 18.)
There is a picture but no sound.
• Is the sound muted?
• Make sure the volume is not set to minimum.
• Is the PC audio cable (commercially available) connected?
• Are audio cables connected properly?
• Is the audio signal input properly to the audio input terminal
corresponding to the selected video input terminal?
Unstable video.
• The signal may be incompatible.
• Try the automatic screen adjustment when the PC2 input
terminal or PC3 input terminals is used.
PC1 or AV1 does not appear properly.
• Is the setting of DVI SELECT correct? (See page 19.)
• Is the input signal compatible with this monitor? (See pages
10 and 35.)
• Turn off the power to the connected equipment and then
turn the power on again.
• If the monitors are connected in a daisy chain, turn off the
power to all the monitors connected in a daisy chain and
then turn the power on again.
PC3 or AV2 does not appear properly.
• Is the setting of BNC SELECT correct? (See page 19.)
• Is the input signal compatible with this monitor? (See page
35.)
Control buttons do not work.
There is no picture.
• Some kind of load noises from outside might interfere with
normal operation. Turn off the power and turn it on after
waiting at least 5 seconds, and then check the operation.
Power LED flashes red.
“SERVICE CALL” appears in the corner of the screen.
• Hardware has a problem. Turn off the monitor and request
repair from your SHARP dealer.
When “TEMPERATURE” is displayed.
• When the internal temperature of the monitor rises
excessively, the brightness of the backlight decreases
in order to prevent high-temperature-related problems.
Remove the cause of the excessive rise in temperature.
(See the description below.)
The monitor sometimes makes a cracking sound.
• You may hear cracking sound from the monitor. This
happens when the cabinet slightly expands and contracts
according to change in temperature. This does not affect
the monitor’s performance.
■ Warning when temperature rises
• When the internal temperature of the monitor rises
excessively, the brightness of the backlight decreases
automatically in order to prevent high-temperature-
related problems. When this occurs, “TEMPERATURE” is
displayed on the screen and the Power LED flashes red
and green alternately.
• If the internal temperature rises further, the monitor
automatically enters standby mode. (The Power LED
continues flashing red and green alternately.)
Solution:
• If the monitor enters standby mode due to a rise in
temperature, to return to normal display, turn the main
power switch off and then back on again. The monitor,
however, will enter standby mode again if the cause of the
temperature rise is not eliminated. (See page 9.)
• Check whether the monitor is placed at a location where a
quick rise in temperature is likely. Internal temperature rises
quickly if the vents on the monitor are blocked.
• Internal temperature rises quickly if dust accumulates inside
the monitor or around the vents. Remove dust if possible.
Ask Sharp dealer about removing internal dust.
34
E
Specifications
Product Specifications
Model
PN-G655E
LCD element
65" wide (163.9 cm diagonal) ASV low-reflection black TFT LCD
Max. resolution
(pixels) 1920 x 1080
Max. colours
16.77 M colours (8 bits/colour)
Pixel pitch
0.744 mm (H) x 0.744 mm (V)
Viewing angle
176° right/left/up/down (contrast ratio ≥ 10)
Screen active area
(mm) 1428 x 804
Computer input signal
Digital (DVI 1.0 standard-compliant), Analogue RGB (0.7 Vp-p) [75 Ω]
Sync signal
Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
Video colour system
PAL, PAL-60, SECAM, NTSC (3.58 MHz), NTSC (4.43 MHz)
Plug and play
VESA DDC2B
Power management
VESA DPMS, DVI DMPM
Input terminals
PC/AV
Digital
DVI-D 24 pin (HDCP compatible) x 1
PC
Analogue
Mini D-sub 15 pin, 3 rows x 1, BNC
*1*2
x 1
Audio
3.5 mm mini stereo jack x 1
AV
Composite video BNC x 1
Component
BNC (Y, Cb/Pb, Cr/Pr)
*1
x 1
Audio
RCA pin (L/R) x 1
Serial (RS-232C)
D-sub 9 pin x 1
Output terminals
PC/AV
Digital
DVI-D 24 pin x 1
*3
Audio
RCA pin (L/R) x 1
Serial (RS-232C)
D-sub 9 pin x 1
Speaker
7 W + 7 W [6 Ω]
Power requirement
AC 100 V - 240 V, 50/60 Hz
Operating temperature
0°C to 40°C
Operating humidity
20% to 80% (no condensation)
Power consumption
550 W (Input signal waiting mode: 10 W, Standby mode: 4.0 W)
Dimensions
(mm) Approx. 1,572 x 126 x 923 (excluding protrusions)
Weight
(kg) Approx. 65 (excluding the temporary stand)
*1
Cannot be used simultaneously.
*2
Does not support plug and play.
*3
Connection is allowed with an HDCP-compatible device only. Does not support Repeater control function.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product imporovement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
Click on the first or last page to see other PN-G655E (serv.man5) service manuals if exist.