Sharp PN-655E (serv.man5) User Manual / Operation Manual ▷ View online
ENGLISH
15
E
Connection with AV equipment (Input mode: VIDEO)
• Connect to equipment that has a video output terminal using a video (BNC) cable (commercially
available).
• Connect with audio output terminals using an audio (RCA) cable (commercially available).
• Select the input mode “VIDEO” for this connection. (See page 22.)
• Select the input mode “VIDEO” for this connection. (See page 22.)
Output terminals on
connected equipment
Video
Audio
Right Left
Composite video
input terminal
input terminal
Audio input
terminals
Audio (RCA) cable (commercially available)
Video (BNC) cable
(commercially available)
(Red:
Right)
(White:
Left)
(Red:
Right)
(White:
Left)
▼
Rear view
Audio output terminals
(See page 9.)
• Audio from the equipment connected to the audio input terminals or PC audio input terminal is
output. Connect to the audio input terminals of the connected equipment using an audio (RCA)
cable (commercially available) or a PC audio cable (commercially available).
cable (commercially available) or a PC audio cable (commercially available).
• The audio output varies depending on the input mode selection:
When the input mode is “DIGITAL” or “ANALOG”, the audio from the PC audio input terminal is
output.
When the input mode is “COMPONENT” or “VIDEO”, the audio from the audio input terminals is
output.
output.
When the input mode is “COMPONENT” or “VIDEO”, the audio from the audio input terminals is
output.
• The output volume is set to the value controlled with the volume adjustment. (See page 22.)
PC digital RGB (DVI-D) output terminal
(See page 9.)
The video from the PC digital RGB (DVI-D) input terminal can be output to external equipment. Use this
terminal to connect multiple units in a daisy chain using digital signal (DVI) cables (commercially available).
Refer to page 18 for a connection example.
terminal to connect multiple units in a daisy chain using digital signal (DVI) cables (commercially available).
Refer to page 18 for a connection example.
ed)
RS-232C input/output terminals
(See page 9.)
Use these terminals to connect to a PC using an RS-232C straight cable(s) (commercially available) and to
control a monitor (or monitors) externally. For connection examples and more information, refer to pages
19, 37, and 38.
control a monitor (or monitors) externally. For connection examples and more information, refer to pages
19, 37, and 38.
16
E
Connecting External Speakers
External speaker terminals (right)
Red
Black
External speaker terminals (left)
Red
Be sure to use external speakers with an impedance of 6 ohms and a rated input of at least 10 W.
Connecting the speaker cables
1. While pushing the tab, insert the tip of the cable.
2. Release the tab.
2. Release the tab.
▼
Rear view
Make sure to connect the speaker terminal and cable polarity ( , ) properly.
The speaker terminals have plus and minus polarity. Plus is red and minus is black.
The speaker cables are also divided into plus and minus.
When connecting the left/right speakers, be sure to connect the plus/minus terminals with the correct
cables.
The speaker cables are also divided into plus and minus.
When connecting the left/right speakers, be sure to connect the plus/minus terminals with the correct
cables.
1.
2.
ENGLISH
17
E
Connecting the Power Cord
Connecting the power cord
• Be sure to set the main power switch to “OFF (O)” (see page 21) before connecting or disconnecting
the power cord.
Do not use a power cord other than the one supplied with the monitor.
1. Confirm that the main power switch is set to “OFF (O)”.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
Main power switch
“OFF (O)” position
Plug
(to the AC
input
terminal)
(to the AC
input
terminal)
For power
outlet
outlet
Power cord
(supplied)
(supplied)
AC input terminal
▼
Rear view
Disconnecting the power cord
1. Confirm that the main power switch is set to “OFF (O)”.
2. Unplug the power cord from the AC power outlet.
2. Unplug the power cord from the AC power outlet.
18
E
Connecting Multiple Monitors
Digital signal (DVI) cable (commercially available)
To PC digital RGB
output terminal
output terminal
shows the
signal flow.
signal flow.
IN
OUT
DVI
IN
DVI
PC digital RGB
output terminal
output terminal
PC digital RGB
input terminal
input terminal
PC digital RGB
input terminal
input terminal
Multiple monitors (4 units max.) can be connected in a daisy chain using the provided PC digital RGB input
terminal and PC digital RGB output terminal.
terminal and PC digital RGB output terminal.
Connection example
▼
Second monitor
▼
First monitor
• Multiple monitors cannot be connected in a daisy chain for audio. Connect the external audio amplifier
(commercially available) to the audio output terminals.
• The length of the digital signal (DVI) cables or surrounding environment may affect the image quality.
Click on the first or last page to see other PN-655E (serv.man5) service manuals if exist.