DOWNLOAD Sharp LL-T19D1 Service Manual ↓ Size: 1.87 MB | Pages: 26 in PDF or view online for FREE

Model
LL-T19D1
Pages
26
Size
1.87 MB
Type
PDF
Document
Service Manual
Brand
Device
Monitor
File
ll-t19d1.pdf
Date

Sharp LL-T19D1 Service Manual ▷ View online

CODE : 00Z
q
SERVICE MANUAL
CONTENTS
Parts marked with "
!
" are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
SHARP CORPORATION
LLT19D1SME
LCD MONITOR
LL-T19D1-H
 MODEL
LL-T19D1-B
      
CHAPTER 1. OUTLINE OF THE PRODUCT, 
NOMENCLATURE AND FUNCTION . . . . . . . . . . . . . . . . . .1 - 1
CHAPTER 2. CONNECTION, ADJUSTMENT, 
OPERATION, AND FUNCTIONS. . . . . . . . . . . . . . . . . . . . .2 - 1
CHAPTER 3. DISASSEMBLY AND ASSEMBLY . . . . . . . . . . . . . . . . . . . .3 - 1
CHAPTER 4. BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 1
CHAPTER 5. TROUBLE SHOOTING  . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 1
CHAPTER 6. CIRCUIT DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 1
CHAPTER 7. PWB LAYOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 1
Model Name
Product Name
Color
For USA
For Other
LL-T19D1H
LL-T19D1U
LL-T19D1E
Gray
LL-T19D1B
LL-T19D1Y
LL-T19D1P
Black
LL-T19D1
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 1
CHAPTER 1. OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1. SPECIFICATIONS
■ 
■ 
■ 
■ 
Product specifications
• Model name
LL-T19D1-H (Frosty gray)/LL-T19D1-B (Black)
• LCD display
48 cm measured diagonally
TFT LCD module
• Resolution (max.)
SXGA 1280 x 1024 pixels
• Displayable colors (max.)
Approx. 16.77 million colors (8bit)
• Brightness (max.)
300cd/m
2
•  Dot pitch
0.294 (H) x 0.294 (V) mm
•  Contrast ratio
700 : 1
•  Angle of visibility
Left-right 170°; Up-down 170° (contrast ratio 
s
 10)
•  Screen display size
Horizontal 376.3 mm x Vertical 301.1 mm
• Video signal
Analog: Analog RGB (0.7Vp-p) [75
]
Digital: DVI standard based on 1.0
• Sync signal
Separate Sync (TTL level: +/-), Sync on Green, Composite Sync (TTL
level: +/-)
• Expansion compensation
Digital scaling (Enlarges VGA/SVGA/XGA etc. to full screen size.)
•  Plug & Play
VESA DDC2B compatible
• Power management
VESA: based on DPMS
DVI: based on DMPM
• Input signal terminal
Analog: 15 pin mini D-sub (3 rows) x 2
Digital: 24 pin DVI-D x 1
• Screen tilt
Upward approx. 0° - 20°; downward approx. 0° - 5°
• Screen swivel
Approx. 90° from left through right (Turn table type)
• Power supply
AC100 - 240V, 50/60Hz 
•  Temperature of operating environment
5 - 35°C
• Power consumption
43W maximum, 2.8W when in power-saving mode
• Dimensions
Approx. 423 (W) x 222 (D) x 392 - 439 (H) mm
• Weight
Approx. 6.9kg (approx. 4.7kg excluding stand)
(Excluding signal cable.)
■ 
■ 
■ 
■ 
Dimensions (Units: mm)
•  Analog signal cable: approx. 1.8 m
•  Digital signal cable, NL-C01E (separately): approx. 2.0 m
■ 
■ 
■ 
■ 
Relevant signal timings (analog) 
•  Recommended resolution is 1280 x 1024.
•  All are compliant only with non-interlaced.
•  Frequencies for Power Macintosh and Sun Ultra series are reference
values. To connect, another adapter (commercially available) may be
required.
•  If the monitor is receiving timing signals that are not compatible, [OUT
OF TIMING] will appear.
Follow your computer's instruction manual to set the timing so that it
is compatible with the monitor.
•   If the monitor is not receiving any signal (synch signal), [NO SIGNAL]
will appear.
Display mode
Hsync
Vsync
Dot 
frequency
VESA
640 x 480
31.5kHz
60Hz
25.175MHz
37.9kHz
72Hz
31.5MHz
37.5kHz
75Hz
31.5MHz
800 x 600
35.1kHz
56Hz
36.0MHz
37.9kHz
60Hz
40.0MHz
48.1kHz
72Hz
50.0MHz
46.9kHz
75Hz
49.5MHz
1024 x 768
48.4kHz
60Hz
65.0MHz
56.5kHz
70Hz
75.0MHz
60.0kHz
75Hz
78.75MHz
1152 x 864
67.5kHz
75Hz
108.0MHz
1280 x 960
60.0kHz
60Hz
108.0MHz
1280 x 1024
64.0kHz
60Hz
108.0MHz
80.0kHz
75Hz
135.0MHz
US text
720 x 400
31.5kHz
70Hz
28.3MHz
Power 
Macintosh 
series
640 x 480
35.0kHz
66.7Hz
30.2MHz
832 x 624
49.7kHz
74.6Hz
57.3MHz
1024 x 768
60.2kHz
75Hz
80.0MHz
1152 x 870
68.7kHz
75Hz
100.0MHz
1280 x 1024
64.0kHz
60Hz
108.0MHz
80.0kHz
75Hz
135.0MHz
Sun 
Ultra series
1024 x 768
48.3kHz
60Hz
64.13MHz
53.6kHz
66Hz
70.4MHz
56.6kHz
70Hz
74.25MHz
1152 x 900
61.8kHz
66Hz
94.88MHz
71.8kHz
76.2Hz
108.23MHz
1280 x 1024
71.7kHz
67.2Hz
117.01MHz
81.1kHz
76Hz
134.99MHz
423
202
348
392
439
222
66
LL-T19D1
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 2
■ 
■ 
■ 
■ 
Relevant signal timings (digital)
•  Recommended resolution is 1280 x 1024.
•  All are compliant only with non-interlaced.
• A computer with an output terminal conforming to DVI (DVI-D24 pin
or DVI-I29 pin) and with SXGA output capability can be connected
here.
(Depending on the type of computer to be connected, the display may
not work correctly.)
•  If the monitor is receiving timing signals that are not compatible, [OUT
OF TIMING] will appear.
Follow your computer's instruction manual to set the timing so that it
is compatible with the monitor.
•  If the monitor is not receiving any signal (synch signal), [NO SIGNAL]
will appear.
■ 
■ 
■ 
■ 
The analog RGB input connector pin
■ 
■ 
■ 
■ 
The DVI-D input connector pin
■ 
■ 
■ 
■ 
Power management
The monitor is based on VESA DPMS and the DVI DMPM standards.
To activate the monitor's Power Management function, both the video
card and the computer must conform to the VESA DPMS standard and
the DVI DMPM standard.
DPMS: Display Power Manegament Signalling
DMPM: Digital Monitor Power Management
■ 
■ 
■ 
■ 
DDC (Plug & Play)
This monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for carrying out Plug & Play functions on the
monitor or PC. It transfers information such as degree of resolution
between the monitor and PC. You can use this function if your PC is
DDC compliant and if it is set so that it can detect the Plug & Play mon-
itor.
There are many varieties of DDC due to the differences between sys-
tems. This monitor works with DDC2B.
Display mode
Hsync
Vsync
Dot 
frequency
VESA
640 x 480
31.5kHz
60Hz
25.175MHz
37.9kHz
72Hz
31.5MHz
37.5kHz
75Hz
31.5MHz
800 x 600
37.9kHz
60Hz
40.0MHz
48.1kHz
72Hz
50.0MHz
46.9kHz
75Hz
49.5MHz
1024 x 768
48.4kHz
60Hz
65.0MHz
56.5kHz
70Hz
75.0MHz
60.0kHz
75Hz
78.75MHz
1152 x 864
67.5kHz
75Hz
108.0MHz
1280 x 960
60.0kHz
60Hz
108.0MHz
1280 x 1024
64.0kHz
60Hz
108.0MHz
US text
720 x 400
31.5kHz
70Hz
28.3MHz
No.
Function
No.
Function
1
Red video signal input
9
+5V
2
Green video signal input
10
GND
3
Blue video signal input
11
N.C.
4
GND
12
DDC data
5
GND
13
For Hsync signal input
6
For red video signal GND
14
For Vsync signal input
7
For green video signal GND
15
DDC clock
8
For blue video signal GND
(Mini D-sub connector with 15 pins)
5
1
2
3
4
10
6
7
8
9
15
11
12
13
14
No.
Function
No.
Function
1
TMDS data 2-
13
N.C.
2
TMDS data 2+
14
+5V
3
TMDS data 2/4 shield
15
GND
4
N.C.
16
Hot plug detection
5
N.C.
17
TMDS data 0-
6
DDC clock
18
TMDS data 0+
7
DDC data
19
TMDS data 0/5 shield
8
N.C.
20
N.C.
9
TMDS data 1-
21
N.C.
10
TMDS data 1+
22
TMDS clock shield
11
TMDS data 1/3 shield
23
TMDS clock +
12
N.C.
24
TMDS clock -
DPMS mode
Screen
Power 
consumption
H-sync
V-sync
ON
Display on
43W
Yes
Yes
STANDBY
Display off
2.8W
No
Yes
SUSPEND
Yes
No
OFF
No
No
DMPM mode
Screen
Power
consumption
ON
Display on
43W
OFF
Display off
2.8W
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
(DVI-D connector with 24 pins)
LL-T19D1
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 3
2. PRODUCT DESCRIPTION
■ 
■ 
■ 
■ 
Height adjustment, angle adjustment
Caution:
•  Pressure from hands on the LCD panel could cause damage.
•  Do not attempt to move the monitor beyond its movement range.
Applying excessive force to move the monitor may damage the
product.
•  Be careful not to allow your fingers to be pinched.
Height adjustment
• When positioning the display higher, hold the stand tight so that it
does not move together with the display.
Angle adjustment
1
INPUT button
To switch between the signal's input terminals.
2
MENU button
This button is used to pop-up, select and close
the OSD (On Screen Display) Menu.
3 c
/MODE 
button
When the OSD Menu is displayed:
This button is used to select menu options.
When the OSD Menu is not displayed:
This button is used to set DISPLAY MODE.
4 e
 
d
 buttons
When the OSD Menu is displayed:
These buttons are used to select an option or
adjust the value of the selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight
brightness.
5
Power button
Pressing this button turns the power on.
6
Power LED
This LED is lit green when in use and orange
when in power-saving mode.
7
Main power switch
8
Power terminal
9
Analog RGB 
input terminal 
1 and 2
The analog signal cable is connected here.
F
DVI-D input 
terminal
The computer's digital RGB output terminal can
be connected here.
The separately-sold cable (NL-C01E) is neces-
sary for connection.
It can be connected to a computer with a DVI-
compatible output terminal (DVI-D24 pin or DVI-
I29 pin) and which has SXGA output ability.
Depending on the computer to be connected,
correct display may or may not be possible.
G
Security lock 
anchor
By connecting a security lock (commercially
available) to the security lock anchor, the monitor
is fixed so that it cannot be transported.
The security slot works in conjunction with Kens-
ington Micro Saver Security Systems.
H
Ventilation 
openings
Note: Never block the ventilation openings as this
may lead to overheating inside the monitor and
result in malfunction.
1
2
3
4
5
6
7
8
9 10 11
12
Lowest position
Highest position
approx. 47mm
approx. 20
approx. 60
approx. 45
approx. 45
approx. 20
approx. 5
Page of 26
Display

Sharp LL-T19D1 Service Manual ▷ Download

  • DOWNLOAD Sharp LL-T19D1 Service Manual ↓ Size: 1.87 MB | Pages: 26 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp LL-T19D1 in PDF for free, which will help you to disassemble, recover, fix and repair Sharp LL-T19D1 Monitor. Information contained in Sharp LL-T19D1 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.