Sharp LL-T19D1 (serv.man14) User Manual / Operation Manual ▷ View online
21
English
Deutsc
h
Fran
ç
ais
Italiano
Espa
ñ
ol
English
MODE SELECT Menu
Notes:
- To choose a menu option:
- To choose a menu option:
/ MODE button
- To complete adjustment: MENU button
OSD H-POSITION (OSD horizontal position)
The position of the OSD Menu can be moved to the
The position of the OSD Menu can be moved to the
left and right. ( buttons)
OSD V-POSITION (OSD vertical position)
The position of the OSD Menu can be moved up
and down. ( buttons)
The position of the OSD Menu can be moved up
and down. ( buttons)
SCALING (Level of scaling)
The sharpness of the image can be adjusted.
The sharpness of the image can be adjusted.
( buttons)
Note:
- When the display mode is set to less than
Note:
- When the display mode is set to less than
1280 x 1024 pixels, the display is enlarged to
cover the whole screen (i.e. the side ratio of the
display may change).
cover the whole screen (i.e. the side ratio of the
display may change).
LANGUAGE
You can choose the language used in OSD Menu.
1. Press the button.
You can choose the language used in OSD Menu.
1. Press the button.
The Language Selection Menu will be displayed
on the screen.
on the screen.
2. Use the
/ MODE button to choose a language.
3. Press the MENU button.
Language Selection Menu will disappear.
Adjusting the screen display
(When using a digital signal)
T19D1_gb.p65
2/14/2003, 3:07 PM
21
22
Monitor care and repair
Monitor care
Always remove the plug from the AC outlet when
cleaning the monitor.
cleaning the monitor.
Cabinet and control panel section
Use a soft dry cloth to lightly wipe away any grime
from the cabinet and control panel.
If they are very dirty, apply neutral detergent to a
dampened soft cloth, wring it out well and wipe
away grime.
from the cabinet and control panel.
If they are very dirty, apply neutral detergent to a
dampened soft cloth, wring it out well and wipe
away grime.
LCD panel section
Use a soft dry cloth to lightly wipe away dirt and
dust from the surface of the LCD panel. (A soft
cloth such as gauze or that used for lens cleaning
is suitable.)
dust from the surface of the LCD panel. (A soft
cloth such as gauze or that used for lens cleaning
is suitable.)
CAUTION!
- Never use thinner, benzine, alcohol, glass
cleaner, etc, as this could lead to color change or
change in shape.
change in shape.
- Never scratch the monitor with anything hard or
apply strong pressure as this could leave marks
or result in malfunction.
or result in malfunction.
Storage
If the monitor will not be used for a long period of
time, be sure to remove the power plug from the
AC outlet.
time, be sure to remove the power plug from the
AC outlet.
CAUTION!
- Do not leave the monitor in contact with rubber or
plastic items for long periods of time as this could
lead to color change or change in shape.
lead to color change or change in shape.
Troubleshooting
If you think the monitor may be faulty, please check
the following points before taking it to be repaired.
If afterwards it still does not work, please contact
the shop where you purchased the monitor or your
nearest Sharp authorized Service Center.
the following points before taking it to be repaired.
If afterwards it still does not work, please contact
the shop where you purchased the monitor or your
nearest Sharp authorized Service Center.
The monitor's florescent tubes have a limited life
span.
- If the screen darkens, persistently flickers or
span.
- If the screen darkens, persistently flickers or
does not light up, it may be necessary to
replace the florescent tube unit. Please inquire
at the shop where you purchased the monitor
or your nearest Sharp authorized Service
Center. (Never attempt this replacement on
your own.)
replace the florescent tube unit. Please inquire
at the shop where you purchased the monitor
or your nearest Sharp authorized Service
Center. (Never attempt this replacement on
your own.)
- In the initial period of use, due to the
characteristics of florescent tubes the screen
may flicker. (This is not a malfunction.) Should
this happen, check by first turning off the
power, then turning it on again.
may flicker. (This is not a malfunction.) Should
this happen, check by first turning off the
power, then turning it on again.
No image appears on the monitor (Power LED is
not lit)
- Is the power cord connected properly? (p.12)
not lit)
- Is the power cord connected properly? (p.12)
No image appears on the monitor (Power LED is lit)
- Is the computer connected properly? (p.11)
- Is the computer turned on?
- Is the signal's input terminal switched to the
- Is the computer connected properly? (p.11)
- Is the computer turned on?
- Is the signal's input terminal switched to the
correct one? (p.13)
- Does the computer's signal timing correspond to
monitor specifications? (p.24)
- Is the computer in power-saving mode?
The image appears distorted
- Does the computer's signal timing correspond to
- Does the computer's signal timing correspond to
monitor specifications? (p.24)
- If you are using the analog signal, perform
automatic screen adjustment. (p.16)
- If you can change the refresh rate on the
computer you are using, change the value to a
lower frequency. (P.24)
lower frequency. (P.24)
Control buttons do not work
- Is the adjustment lock on? (p.14)
- Is the adjustment lock on? (p.14)
T19D1_gb.p65
2/14/2003, 3:07 PM
22
23
English
Deutsc
h
Fran
ç
ais
Italiano
Espa
ñ
ol
English
Specifications
Product specifications
Model name
LL-T19D1-H (Frosty gray)/LL-T19D1-B (Black)
LCD display
48 cm measured diagonally TFT LCD module
Resolution (max.)
SXGA 1280 x 1024 pixels
Displayable colors (max.)
Approx.16.77 million colors (8 bit )
Brightness (max.)
300 cd/m
2
Dot pitch
0.294(H) x 0.294(V) mm
Contrast ratio
700:1
Angle of visibility
Left-right 170°; Up-down 170°
(contrast ratio
(contrast ratio
>
=
10)
Screen display size
Horizontal 376.3 mm x Vertical 301.1 mm
Video signal
Analog: Analog RGB (0.7 Vp-p) [75
Ω]
Digital: DVI standard based on 1.0
Sync signal
Separate Sync (TTL level: +/-), Sync on
Green, Composite Sync (TTL level: +/-)
Green, Composite Sync (TTL level: +/-)
Expansion compensation
Digital scaling (Enlarges VGA/SVGA/XGA etc. to
full screen size.)
full screen size.)
Plug & Play
VESA DDC2B compatible
Power management
VESA: based on DPMS
DVI: based on DMPM
DVI: based on DMPM
Input signal terminal
Analog:15 pin mini D-sub (3 rows) x 2
Digital: 24 pin DVI-D x 1
Digital: 24 pin DVI-D x 1
Screen tilt
Upward approx. 0 - 20°; downward approx. 0 - 5°
Screen swivel
Approx. 90° from left through right (Turn table type)
Power supply
AC100 - 240 V, 50/60 Hz
Temperature of operating environment
5 - 35°C
Power consumption
43 W maximum,
2.8 W when in power-saving mode
2.8 W when in power-saving mode
Dimensions
Approx. 423(W) x 222(D) x 392 - 439(H) mm
Weight
Approx. 6.9 kg (approx. 4.7 kg excluding stand)
(Excluding signal cable.)
(Excluding signal cable.)
Dimensions
(Units: mm)
- Analog signal cable: approx. 1.8 m
- Digital signal cable, NL-C01E (purchased
- Digital signal cable, NL-C01E (purchased
separately): approx. 2.0 m
T19D1_gb.p65
2/14/2003, 3:07 PM
23
24
Specifications
Relevant signal timings (analog)
- Recommended resolution is 1280 x 1024.
- All are compliant only with non-interlaced.
- Frequencies for Power Macintosh and the Sun
- All are compliant only with non-interlaced.
- Frequencies for Power Macintosh and the Sun
Ultra series are reference values. To connect,
another adapter (commercially available) may be
required.
another adapter (commercially available) may be
required.
- If the monitor is receiving timing signals that are
not compatible, [OUT OF TIMING] will appear.
Follow your computer's instruction manual to set
the timing so that it is compatible with the
monitor.
Follow your computer's instruction manual to set
the timing so that it is compatible with the
monitor.
- If the monitor is not receiving any signal (synch
signal), [NO SIGNAL] will appear.
Relevant signal timings (digital)
- Recommended resolution is 1280 x 1024.
- All are compliant only with non-interlaced.
- A computer with an output terminal conforming to
- All are compliant only with non-interlaced.
- A computer with an output terminal conforming to
DVI (DVI-D24 pin or DVI-I29 pin) and with SXGA
output capability can be connected here.
(Depending on the type of computer to be
connected, the display may not work correctly.)
output capability can be connected here.
(Depending on the type of computer to be
connected, the display may not work correctly.)
- If the monitor is receiving timing signals that are
not compatible, [OUT OF TIMING] will appear.
Follow your computer's instruction manual to set
the timing so that it is compatible with the
monitor.
Follow your computer's instruction manual to set
the timing so that it is compatible with the
monitor.
- If the monitor is not receiving any signal (synch
signal), [NO SIGNAL] will appear.
Display mode
VESA
US text
Power
Macintosh
series
Macintosh
series
Sun Ultra
series
series
Hsync
Vsync
Dot
frequency
frequency
VESA
US text
Display mode
Hsync
Vsync
Dot
frequency
frequency
T19D1_gb.p65
2/14/2003, 3:07 PM
24
Click on the first or last page to see other LL-T19D1 (serv.man14) service manuals if exist.