Sharp LL-T1811W Service Manual ▷ View online
LL-T1811W
1 – 4
NOMENCLATURE AND FUNCTION
Front view
Control Panel
Power button
This button switches the monitor
ON and OFF.
This button switches the monitor
ON and OFF.
Power LED
Green light: In use
Orange light: Power saving mode or
Green light: In use
Orange light: Power saving mode or
signal failure
Lamp off: Power OFF
SELECT button
This button is used to select menu options when the
OSD Menu is displayed.
This button is used to select menu options when the
OSD Menu is displayed.
Buttons
When the On Screen Display (OSD) Menu is displayed:
These buttons are used to increase or decrease the
value of a selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness
These buttons are used to increase or decrease the
value of a selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness
MENU button
This button is used to pop-up, select and close the
OSD Menu.
This button is used to pop-up, select and close the
OSD Menu.
INPUT button
Use this button to switch between input signal terminals.
(Analogue signal input terminal
Use this button to switch between input signal terminals.
(Analogue signal input terminal
DVI-I input terminal)
Front view
Ventilation
openings
openings
Note: Never block the ventilation
openings as this may lead to
overheating inside the monitor
and result in malfunction.
openings as this may lead to
overheating inside the monitor
and result in malfunction.
Ventilation
openings
openings
Power ter
Analog signal input terminal
Remove the cover to see the analog siganl
input terminal. At the time of leaving the
factory the analog signal cable is connected.
Remove the cover to see the analog siganl
input terminal. At the time of leaving the
factory the analog signal cable is connected.
minal
Remove the cover to see the power terminal.
The AC adapter is connected here.
The AC adapter is connected here.
USB port
Remove the cover to see the USB port
(upstream: 1 port, downstream: 2ports).
DVI-I input terminal
Remove the cover to locate the digital/
analogue signal input terminal (DVI-I29 pin).
The computer's digital RGB output terminal
or analogue RGB output terminal can be
connected here.
For a digital signal input: It can be connected
to a computer with a DVI-compatible output
terminal (DVI-D24 pin or DVI-I29 pin) and
which has SXGA output ability. Depending
on the computer to be connected, correct
display may or may not be possible.
To be able to connect, a cable that is to be
purchased separately is required.
To connect to a digital RGB output terminal:
Digital signal cable(model name: NL-C01E)
To connect to an analogue RGB output
terminal: Analogue signal cable(model
name: NL-C02E)
Remove the cover to see the USB port
(upstream: 1 port, downstream: 2ports).
DVI-I input terminal
Remove the cover to locate the digital/
analogue signal input terminal (DVI-I29 pin).
The computer's digital RGB output terminal
or analogue RGB output terminal can be
connected here.
For a digital signal input: It can be connected
to a computer with a DVI-compatible output
terminal (DVI-D24 pin or DVI-I29 pin) and
which has SXGA output ability. Depending
on the computer to be connected, correct
display may or may not be possible.
To be able to connect, a cable that is to be
purchased separately is required.
To connect to a digital RGB output terminal:
Digital signal cable(model name: NL-C01E)
To connect to an analogue RGB output
terminal: Analogue signal cable(model
name: NL-C02E)
Analog signal cable
Security lock anchor
By connecting a security lock (purchased separately) to the security lock
anchor, th
(see operation manual)
By connecting a security lock (purchased separately) to the security lock
anchor, th
(see operation manual)
e monitor is fixed so that it cannot be transported.
Connects to the computer's (i.e. PC etc)
analog RGB output terminal.
analog RGB output terminal.
30
45
45
5
Adjusting the angle of the monitor
Lightly holding both sides of the monitor,
adjust it to a suitable viewing angle.
adjust it to a suitable viewing angle.
Note:
Pressure from hands on the LCD
panel could cause damage.
panel could cause damage.
LL-T1811W
1 – 4
NOMENCLATURE AND FUNCTION
Front view
Control Panel
Power button
This button switches the monitor
ON and OFF.
This button switches the monitor
ON and OFF.
Power LED
Green light: In use
Orange light: Power saving mode or
Green light: In use
Orange light: Power saving mode or
signal failure
Lamp off: Power OFF
SELECT button
This button is used to select menu options when the
OSD Menu is displayed.
This button is used to select menu options when the
OSD Menu is displayed.
Buttons
When the On Screen Display (OSD) Menu is displayed:
These buttons are used to increase or decrease the
value of a selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness
These buttons are used to increase or decrease the
value of a selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness
MENU button
This button is used to pop-up, select and close the
OSD Menu.
This button is used to pop-up, select and close the
OSD Menu.
INPUT button
Use this button to switch between input signal terminals.
(Analogue signal input terminal
Use this button to switch between input signal terminals.
(Analogue signal input terminal
DVI-I input terminal)
Front view
Ventilation
openings
openings
Note: Never block the ventilation
openings as this may lead to
overheating inside the monitor
and result in malfunction.
openings as this may lead to
overheating inside the monitor
and result in malfunction.
Ventilation
openings
openings
Power ter
Analog signal input terminal
Remove the cover to see the analog siganl
input terminal. At the time of leaving the
factory the analog signal cable is connected.
Remove the cover to see the analog siganl
input terminal. At the time of leaving the
factory the analog signal cable is connected.
minal
Remove the cover to see the power terminal.
The AC adapter is connected here.
The AC adapter is connected here.
USB port
Remove the cover to see the USB port
(upstream: 1 port, downstream: 2ports).
DVI-I input terminal
Remove the cover to locate the digital/
analogue signal input terminal (DVI-I29 pin).
The computer's digital RGB output terminal
or analogue RGB output terminal can be
connected here.
For a digital signal input: It can be connected
to a computer with a DVI-compatible output
terminal (DVI-D24 pin or DVI-I29 pin) and
which has SXGA output ability. Depending
on the computer to be connected, correct
display may or may not be possible.
To be able to connect, a cable that is to be
purchased separately is required.
To connect to a digital RGB output terminal:
Digital signal cable(model name: NL-C01E)
To connect to an analogue RGB output
terminal: Analogue signal cable(model
name: NL-C02E)
Remove the cover to see the USB port
(upstream: 1 port, downstream: 2ports).
DVI-I input terminal
Remove the cover to locate the digital/
analogue signal input terminal (DVI-I29 pin).
The computer's digital RGB output terminal
or analogue RGB output terminal can be
connected here.
For a digital signal input: It can be connected
to a computer with a DVI-compatible output
terminal (DVI-D24 pin or DVI-I29 pin) and
which has SXGA output ability. Depending
on the computer to be connected, correct
display may or may not be possible.
To be able to connect, a cable that is to be
purchased separately is required.
To connect to a digital RGB output terminal:
Digital signal cable(model name: NL-C01E)
To connect to an analogue RGB output
terminal: Analogue signal cable(model
name: NL-C02E)
Analog signal cable
Security lock anchor
By connecting a security lock (purchased separately) to the security lock
anchor, th
(see operation manual)
By connecting a security lock (purchased separately) to the security lock
anchor, th
(see operation manual)
e monitor is fixed so that it cannot be transported.
Connects to the computer's (i.e. PC etc)
analog RGB output terminal.
analog RGB output terminal.
30
45
45
5
Adjusting the angle of the monitor
Lightly holding both sides of the monitor,
adjust it to a suitable viewing angle.
adjust it to a suitable viewing angle.
Note:
Pressure from hands on the LCD
panel could cause damage.
panel could cause damage.
LL-T1811W
1 – 4
NOMENCLATURE AND FUNCTION
Front view
Control Panel
Power button
This button switches the monitor
ON and OFF.
This button switches the monitor
ON and OFF.
Power LED
Green light: In use
Orange light: Power saving mode or
Green light: In use
Orange light: Power saving mode or
signal failure
Lamp off: Power OFF
SELECT button
This button is used to select menu options when the
OSD Menu is displayed.
This button is used to select menu options when the
OSD Menu is displayed.
Buttons
When the On Screen Display (OSD) Menu is displayed:
These buttons are used to increase or decrease the
value of a selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness
These buttons are used to increase or decrease the
value of a selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness
MENU button
This button is used to pop-up, select and close the
OSD Menu.
This button is used to pop-up, select and close the
OSD Menu.
INPUT button
Use this button to switch between input signal terminals.
(Analogue signal input terminal
Use this button to switch between input signal terminals.
(Analogue signal input terminal
DVI-I input terminal)
Front view
Ventilation
openings
openings
Note: Never block the ventilation
openings as this may lead to
overheating inside the monitor
and result in malfunction.
openings as this may lead to
overheating inside the monitor
and result in malfunction.
Ventilation
openings
openings
Power ter
Analog signal input terminal
Remove the cover to see the analog siganl
input terminal. At the time of leaving the
factory the analog signal cable is connected.
Remove the cover to see the analog siganl
input terminal. At the time of leaving the
factory the analog signal cable is connected.
minal
Remove the cover to see the power terminal.
The AC adapter is connected here.
The AC adapter is connected here.
USB port
Remove the cover to see the USB port
(upstream: 1 port, downstream: 2ports).
DVI-I input terminal
Remove the cover to locate the digital/
analogue signal input terminal (DVI-I29 pin).
The computer's digital RGB output terminal
or analogue RGB output terminal can be
connected here.
For a digital signal input: It can be connected
to a computer with a DVI-compatible output
terminal (DVI-D24 pin or DVI-I29 pin) and
which has SXGA output ability. Depending
on the computer to be connected, correct
display may or may not be possible.
To be able to connect, a cable that is to be
purchased separately is required.
To connect to a digital RGB output terminal:
Digital signal cable(model name: NL-C01E)
To connect to an analogue RGB output
terminal: Analogue signal cable(model
name: NL-C02E)
Remove the cover to see the USB port
(upstream: 1 port, downstream: 2ports).
DVI-I input terminal
Remove the cover to locate the digital/
analogue signal input terminal (DVI-I29 pin).
The computer's digital RGB output terminal
or analogue RGB output terminal can be
connected here.
For a digital signal input: It can be connected
to a computer with a DVI-compatible output
terminal (DVI-D24 pin or DVI-I29 pin) and
which has SXGA output ability. Depending
on the computer to be connected, correct
display may or may not be possible.
To be able to connect, a cable that is to be
purchased separately is required.
To connect to a digital RGB output terminal:
Digital signal cable(model name: NL-C01E)
To connect to an analogue RGB output
terminal: Analogue signal cable(model
name: NL-C02E)
Analog signal cable
Security lock anchor
By connecting a security lock (purchased separately) to the security lock
anchor, th
(see operation manual)
By connecting a security lock (purchased separately) to the security lock
anchor, th
(see operation manual)
e monitor is fixed so that it cannot be transported.
Connects to the computer's (i.e. PC etc)
analog RGB output terminal.
analog RGB output terminal.
30
45
45
5
Adjusting the angle of the monitor
Lightly holding both sides of the monitor,
adjust it to a suitable viewing angle.
adjust it to a suitable viewing angle.
Note:
Pressure from hands on the LCD
panel could cause damage.
panel could cause damage.
LL-T1811W
1 – 4
NOMENCLATURE AND FUNCTION
Front view
Control Panel
Power button
This button switches the monitor
ON and OFF.
This button switches the monitor
ON and OFF.
Power LED
Green light: In use
Orange light: Power saving mode or
Green light: In use
Orange light: Power saving mode or
signal failure
Lamp off: Power OFF
SELECT button
This button is used to select menu options when the
OSD Menu is displayed.
This button is used to select menu options when the
OSD Menu is displayed.
Buttons
When the On Screen Display (OSD) Menu is displayed:
These buttons are used to increase or decrease the
value of a selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness
These buttons are used to increase or decrease the
value of a selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness
MENU button
This button is used to pop-up, select and close the
OSD Menu.
This button is used to pop-up, select and close the
OSD Menu.
INPUT button
Use this button to switch between input signal terminals.
(Analogue signal input terminal
Use this button to switch between input signal terminals.
(Analogue signal input terminal
DVI-I input terminal)
Front view
Ventilation
openings
openings
Note: Never block the ventilation
openings as this may lead to
overheating inside the monitor
and result in malfunction.
openings as this may lead to
overheating inside the monitor
and result in malfunction.
Ventilation
openings
openings
Power ter
Analog signal input terminal
Remove the cover to see the analog siganl
input terminal. At the time of leaving the
factory the analog signal cable is connected.
Remove the cover to see the analog siganl
input terminal. At the time of leaving the
factory the analog signal cable is connected.
minal
Remove the cover to see the power terminal.
The AC adapter is connected here.
The AC adapter is connected here.
USB port
Remove the cover to see the USB port
(upstream: 1 port, downstream: 2ports).
DVI-I input terminal
Remove the cover to locate the digital/
analogue signal input terminal (DVI-I29 pin).
The computer's digital RGB output terminal
or analogue RGB output terminal can be
connected here.
For a digital signal input: It can be connected
to a computer with a DVI-compatible output
terminal (DVI-D24 pin or DVI-I29 pin) and
which has SXGA output ability. Depending
on the computer to be connected, correct
display may or may not be possible.
To be able to connect, a cable that is to be
purchased separately is required.
To connect to a digital RGB output terminal:
Digital signal cable(model name: NL-C01E)
To connect to an analogue RGB output
terminal: Analogue signal cable(model
name: NL-C02E)
Remove the cover to see the USB port
(upstream: 1 port, downstream: 2ports).
DVI-I input terminal
Remove the cover to locate the digital/
analogue signal input terminal (DVI-I29 pin).
The computer's digital RGB output terminal
or analogue RGB output terminal can be
connected here.
For a digital signal input: It can be connected
to a computer with a DVI-compatible output
terminal (DVI-D24 pin or DVI-I29 pin) and
which has SXGA output ability. Depending
on the computer to be connected, correct
display may or may not be possible.
To be able to connect, a cable that is to be
purchased separately is required.
To connect to a digital RGB output terminal:
Digital signal cable(model name: NL-C01E)
To connect to an analogue RGB output
terminal: Analogue signal cable(model
name: NL-C02E)
Analog signal cable
Security lock anchor
By connecting a security lock (purchased separately) to the security lock
anchor, th
(see operation manual)
By connecting a security lock (purchased separately) to the security lock
anchor, th
(see operation manual)
e monitor is fixed so that it cannot be transported.
Connects to the computer's (i.e. PC etc)
analog RGB output terminal.
analog RGB output terminal.
30
45
45
5
Adjusting the angle of the monitor
Lightly holding both sides of the monitor,
adjust it to a suitable viewing angle.
adjust it to a suitable viewing angle.
Note:
Pressure from hands on the LCD
panel could cause damage.
panel could cause damage.
Display