DOWNLOAD Sharp LL-T1811W (serv.man2) Service Manual ↓ Size: 260.68 KB | Pages: 9 in PDF or view online for FREE

LL-T1811W

2 – 6

Note: When the lock is in place, all buttons other than the power but-

ton are disabled.

■

■

■

■

Messages displayed on the screen and OSD Menu contents can be
changed to the following languages.

Dutch, English, French, German, Italian, Spanish, Swedish.

1.  Press the power button to turn the monitor off.

2. Pressing the 

e

 and 

d

 buttons simultaneously, press the power

button (i.e. turn the monitor on). 

Continue pressing the button until the Language Selection Menu
(LANGUAGE) is displayed on the screen.

3.  Use the SELECT button to choose a language.

4.  Press the MENU button.

The setting is complete. From now, messages and adjustment
menus will be displayed in the chosen language.

Note:  The language selection menu disappears approximately 30 sec-

onds after the last command has been made.

Options in the ADJUSTMENT Menu can be adjusted automatically

(CLOCK, PHASE, H-POS V-POS).

Note: When setting up this monitor for the first time or after having

changed an aspect of the current system ,perform an automatic
screen adjustment before use.

1.  First display an image that makes the entire screen very bright. If

you are using Windows, you can use the Adjustment Pattern on
the accompanying Utility Disk (right column).

2.  Press the MENU button.

The ADJUSTMENT Menu will be displayed.

3. Press 

the 

d

 button.

The screen will become dark and [ADJUSTING] will be displayed. 
After a few seconds the ADJUSTMENT Menu will return. (The
automatic adjustment is now complete.)

4.  Press the MENU button 4 times to make the OSD Menu disap-

pear.

Notes: •  In most cases automatic adjustment is sufficient.

•  If necessary due to any of the following, manual adjustments

can be performed after the automatic adjustment.

• When further fine adjustment is needed.

• When the computer's video input signals are Composite

Sync or Sync On Green. (Automatic adjustments may not
be possible.)

• When [OUT OF ADJUST] is displayed. (When the screen

displays an entirely dark image, the automatic screen
adjustment may be disabled. When making an automatic
adjustment, be sure to either use the Adjustment Pattern or
try displaying an image that makes the entire screen very
bright.)

If you are using Windows, you can use the Adjustment Pattern (for

Windows) on the accompanying Utility Disk.

This explanation is for Windows 95/98/Me/2000, and assumes that the

floppy disk drive is "A drive".

1.  Place the Utility Disk (provided) into the computer's A drive.

2.  Open [My Computer] and select [3 

1

/

2

 Floppy [A:]]. If using Win-

dows 3.1, open [File Manager] and choose "A drive".

3.  Double click on [Adj_uty.exe] to run the Adjustment Program. 

The Adjustment Pattern will appear.

Notes: •  After completing the adjustments, press the computer's [Esc]

key to exit the Adjustment Program.

•  If the floppy disk drive of your computer is not "A drive",

please read the below substituting the floppy disk drive you

are using in place of "A drive" or "A".

•  If your computer's display mode is set to 65K colors, you

may see the different color levels in each color pattern or the

gray scale may look colored. (This is due to the specification

of the input signal and is not a malfunction.)

Adjustments can be made using On Screen Display (OSD) Menu pro-

vided.

1.  Display an image that makes the entire screen very bright. If using

Windows, you can open and use the Adjustment Pattern on the

accompanying Utility Disk.

2.  Press the MENU button.

The ADJUSTMENT Menu will be displayed.

At this point relevant menu options can be adjusted. Each time the

MENU button is pressed the next menu is selected. (ADJUST-

MENT 

3

 GAIN CONTROL 

3

 WHITE BALANCE 

3

 MODE

SELECT 

3

 OSD Menu disappears)

Notes: • The OSD Menu automatically disappears approximately 30

seconds after the last command.

•  This explanation is based on using the Adjustment Pattern

(for Windows) to make adjustments.

Adjustment pattern

LL-T1811W

2 – 7

MANUAL:  Individual menu options are manually adjusted.

AUTO: 

Every menu option is automatically adjusted.

Notes: • Press the 

d

 button to select [AUTO].

•  To choose a menu option : SELECT button

•  To go to the next menu : MENU button

The figure below demonstrates how to adjust so that vertical flicker
noise is not emitted. (

e

 

d

 buttons)

The figure below demonstrates how to adjust so that horizontal flicker
noise is not emitted. (

e

 

d

 buttons)

Note: Adjustments to PHASE should be made only after CLOCK has

been correctly set.

To center the screen image within the boundaries of the screen, adjust
the left-right (H-POS) values and the up-down (V-POS) values.

(

e

 

d

 buttons)

Notes: • About the ADJUSTMENT Menu

The ADJUSTMENT Menu can be reset to its ex-factory val-
ues in one command.

1.  Turn the monitor power on.

2.  Press the MENU button and the 

e

 button at the same

time. When [RESET] appears on the screen the reset is
complete.

MANUAL: Individual menu options are manually adjusted.

AUTO:

Every menu option is automatically adjusted using the
Auto Gain Control* function, 

Notes: • Press the 

d

 button to select [AUTO].

•  To choose a menu option : SELECT button

•  To go to the next menu : MENU button

* Auto Gain Control function

•  The Auto Gain Control adjusts contrast and black level based on the

brightest color of the image displayed. If you are not using the

Adjustment Pattern it is necessary to have an area of 5 mm 

u

 5 mm

of white displayed, and if not adjustments may not be possible. (In

such case, [OUT OF ADJUST] will appear and setting values

remain unchanged.)

•  If the signal coming from the computer is composite sync or sync on

green, automatic adjustment cannot be performed. Please perform

manual adjustment instead.

Total screen brightness can be adjusted while watching the color pat-

tern. (

e

 

d

 buttons)

While watching the color pattern, adjustments can be made so that all

graduations appear. (

e

 

d

 buttons)

Notes: • On settings other than [STD] not all graduations can be dis-

played. To display all graduations, set to [STD].

• Use the 

e

 

d

 buttons to select [COOL], [

n

], [STD], [

n

], [WARM]

or [USER].

•  Selecting USER will display the setting values for [R-CON-

TRAST], [G-CONTRAST] and [B-CONTRAST], in order to

make fine adjustments.

Vertical flicker noise

Horizontal flicker noise

Adjustment
Pattern

Screen frame

Color pattern

LL-T1811W

2 – 8

•  Use the SELECT button to select [R-CONTRAST], [G-CON-

TRAST] and [B-CONTRAST].

•  To go to the next menu : MENU button

COOL : Color tone bluer than standard

•

: Color tone slightly bluer than standard

STD

: Color tone standard setting

•

: Color tone slightly redder than standard

WARM : Color tone redder than standard

R-CONTRAST :

 e

 button for blue-green

d 

button for red

G-CONTRAST : 

e

 button for purple

d

 button for green

B-CONTRAST : 

e

 button for yellow

d 

button for blue

Notes: • Depending on the resolution of the input signal, even if menu

options can be selected, the display may not change.

•  To choose a menu option : SELECT button

•  When adjustment complete : MENU button

The position of the OSD display can be moved to the left and right.

(

e

 

d

 buttons)

The position of the OSD display can be moved up and down.
(

e

 

d

 buttons)

The input mode can be set. (

e

 

d

 buttons)

VESA : VESA mode

MAC : Power Macintosh mode

You can specify the horizontal resolution of a 400-line screen when

using US text, etc. (

e

 

d

 buttons)

640 : 640 

u

 400 dot mode

720 : 720 

u

 400 dot mode (US text etc.)

Note: As the resolution input for other than 400 lines is done automat-

ically, there is no need to set it.

For display modes of less than 1280 

u

 1024 pixels, the display can be

expanded if desired. (

e

 

d

 buttons)

OFF: Expansion off

ON1: Using the fixed aspect ratio, the entire screen is enlarged.

ON2: The entire screen is enlarged.

Note: If a resolution of 1280 

u

 1024 pixels cannot be achieved even

after expansion is attempted, the screen's perimeter will display
black. (This is not a malfunction.)

If [EXPAND] is set on [ON1] or [ON2], the sharpness of the image can

be adjusted. (

e

 

d

 buttons)

Note: If [EXPAND] is set on [OFF], [SCALING] cannot be adjusted.

If this is set on [OFF], the original color scheme of the LCD monitor will
be displayed. If this is set on [ON], the colors of will be corrected

according to the computer image. (

e

 

d

 buttons)

Note: To set [COLOR MODE] to [ON], set the [WHITE BALANCE] to

[STD].

Adjustments can be made using the On Screen Display (OSD) Menu

provided.

1.  Display an image that makes the entire screen very bright. 

If using Windows, you can open and use the Adjustment Pattern
on the accompanying Utility Disk.

2.  Press the MENU button.

The WHITE BALANCE Menu will be displayed. 

At this point relevant menu options can be adjusted.

Each time the MENU button is pressed the next menu is selected. 
(WHITE BALANCE 

3

 MODE SELECT 

3

 OSD Menu disappears)

Notes: • The OSD Menu automatically disappears approximately 30

seconds after the last command.

•  This explanation is based on use of the Adjustment Pattern

(for Windows) to make adjustments

Notes: • On settings other than [STD] not all graduations can be dis-

played. To display all graduations, set to [STD].

• Use the 

e

 

d

 buttons to select [COOL], [

n

], [STD], [

n

], [WARM]

or [USER].

•  Selecting USER will display the setting values for [R-CON-

TRAST], [G-CONTRAST] and [B-CONTRAST], in order to

make fine adjustments.

LL-T1811W

2 – 9

•  Use the SELECT button to select [R-CONTRAST], [G-CON-

TRAST] and [B-CONTRAST].

•  To go to the next menu : MENU button

COOL : Color tone bluer than standard

•

: Color tone slightly bluer than standard

STD

: Color tone standard setting

•

: Color tone slightly redder than standard

WARM : Color tone redder than standard

R-CONTRAST :

 e

 button for blue-green

d 

button for red

G-CONTRAST : 

e

 button for purple

d

 button for green

B-CONTRAST : 

e

 button for yellow

d 

button for blue

Notes: • Depending on the resolution of the input signal, even if menu

options can be selected, the display may not change.

•  To choose a menu option : SELECT button

•  When adjustment complete : MENU button

The position of the OSD display can be moved to the left and right.

(

e

 

d

 buttons)

The position of the OSD display can be moved up and down.
(

e

 

d

 buttons)

The input mode can be set. (

e

 

d

 buttons)

VESA : VESA mode

MAC : Power Macintosh mode

You can specify the horizontal resolution of a 400-line screen when

using US text, etc. (

e

 

d

 buttons)

640 : 640 

u

 400 dot mode

720 : 720 

u

 400 dot mode (US text etc.)

Note: As the resolution input for other than 400 lines is done automat-

ically, there is no need to set it.

For display modes of less than 1280 

u

 1024 pixels, the display can be

expanded if desired. (

e

 

d

 buttons)

OFF: Expansion off

ON1: Using the fixed aspect ratio, the entire screen is enlarged.

ON2: The entire screen is enlarged.

Note: If a resolution of 1280 

u

 1024 pixels cannot be achieved even

after expansion is attempted, the screen's perimeter will display
black. (This is not a malfunction.)

If [EXPAND] is set on [ON1] or [ON2], the sharpness of the image can

be adjusted. (

e

 

d

 buttons)

Note: If [EXPAND] is set on [OFF], [SCALING] cannot be adjusted.

If this is set on [OFF], the original color scheme of the LCD monitor will
be displayed. If this is set on [ON], the colors of will be corrected

according to the computer image. (

e

 

d

 buttons)

Note: To set [COLOR MODE] to [ON], set the [WHITE BALANCE] to

[STD].