DOWNLOAD Sharp LL-T1811W (serv.man2) Service Manual ↓ Size: 260.68 KB | Pages: 9 in PDF or view online for FREE

LL-T1811W

2 – 2

Connect this device's analogue signal cable to the computer (PC etc.).

When connecting, ensure that both the monitor and computer are
switched off.

Be careful not to overly bend the cable or add extension cords as this
could lead to malfunction.

Note: If connecting to the Sun Ultra series, a conversion adapter

(purchased separately) may be required.

• Using a display cable (to be purchased separately), it can be con-

nected to the computer's (PC etc.) digital RGB output terminal or

analogue RGB output terminal.

• To connect to a digital RGB output terminal: Digital signal cable

(model name: NL-C01E)

• To connect to an analogue RGB output terminal: Analogue signal

cable (model name: NL-C02E)

• For a digital signal input: It can be connected to a computer with a

DVI-compatible output terminal (DVI-D24 pin or DVI-I29 pin) and

which has SXGA output ability. Depending on the computer to be

connected, correct display may or may not be possible.

• Be careful not to overly bend the cable or add extension cords as

this could lead to malfunction.

1. Remove 

the 

cover.

2.

Connect the display cable (to be purchased separately) into the

DVI-I input terminal.

3.

Replace the cover.

This monitor can be used with hubs which use the USB standard
(Rev. 1.1).

USB devices such as keyboard and mouse can be connected here.

Up to 100mA of power is able to be supplied per port. Devices requir-

ing more than 100mA cannot be connected.

USB compatible computers and self-powered hubs can be connected.
(Bus-powered hubs cannot be connected.)

Notes: • If a USB cable is required, please use the one included.

•  Before connecting, ensure that the shape of the USB cable

connector is correct.

•  For information regarding the USB function (such as set-up)

please refer to the operation manual of the computer to be

connected.

•  Some computers, OS and other devices may not be able to

be activated. To ascertain a certain device's USB compatibil-

ity, please contact the manufacturer of the device.

1.  Remove the cover.

2.  Connect the USB cable.

3. Replace 

the 

cover.

Firmly insert the analog RGB output terminal
(mini D-sub 15 pin with 3 rows) then tighten the
screws each side.

Analog signal cable

If connecting to a D-sub 15 pin 2 row Apple
Power Macintosh, attach a Macintosh conversion
adapter (to be purchased separately) to
the RGB signal cable.

Macintosh conversion adapter

Analog signal cable
After connecting the adapter, 
tighten the screws on each side 
to fix into place.

(Rear View)

Cover

To the computer's 
RGB output terminal

Display cable (to be
purchased separately)

DVI-I input terminal

(Rear View)

Cover

USB port: 
Upstream (1 port)

USB port: 
Downstream (2 ports)

LL-T1811W

2 – 3

1.  Press the monitor's power button. 

2.  Turn on the computer.

The power LED will be lit green, and the screen will display an

image.

0

0

0

0

Use the INPUT button to switch between signal input terminals.

Notes: (when using an analog signal)

•  If using the monitor for the first time or after having changed

the system settings during use, perform an automatic screen
adjustment.

•  When connecting to a notebook, if the notebook computer's

screen is set so that it is displaying at the same time, the
MS-DOS screen may not be able to display properly. In this
case, change the settings so that only the monitor is display-
ing.

1.  Turn the computer off.

2.  Press the monitor's power button.

The Power LED will disappear.

If the monitor is not going to be used for a long period of time, be
sure to unplug it from the AC outlet.

An arm or stand based on the VESA standard (purchased separately)

can be attached to the monitor.

Procurement of the arm or stand is at the customer's discretion.

*

Attachments must satisfy the following.

*

Compatible with the VESA standard

*

Have a gap of at least 100 mm 

u

 100 mm between the screw holes

on the section to be attached

*

Not be likely to fall off or break off after being attached to the moni-
tor.

Notes: • Do not bend the signal cable or the AC adapter cable nor

place weight on them. Doing so could lead to damage.

•  While following these instructions, please also refer to the

installation instructions in the operation manual included with

the arm or stand.

1.  Spread out a soft cloth on a suitable horizontal surface.

2.  Being careful not to damage the monitor, gently lay the monitor on

it display-side down.

3.  Remove the stand cover and the covers to the left and to the right.

4.  Remove the two screws, and remove the cover.

5.

Remove the four screws and then remove the stand from the monitor.

ON

Turn monitor on 

Turn on device to 
which monitor is 
connected

Press power button

INPUT-1

INPUT-2 (DIGITAL)

INPUT-2 (ANALOG)

INPUT

DVI-I input terminal

(digital)

DVI-I input terminal

(analog)

Analog signal input terminal

OFF

Turn off device to 
which monitor is 
connected

Turn monitor off 

Press power button

(Rear view)

Cover

Cover

Stand cover

Lift one side

Cover

Two screws

Four screws

Stand

LL-T1811W

2 – 4

Depending on the computer or OS, it may be necessary to use the
computer to operate the installation of monitor set-up information etc.
If so, follow the steps below to install the monitor set-up information.
(Depending on the type of computer or OS, command names and
methods may differ. Please follow the computer's own operation man-
ual while reading this.)

An ICC (International Color Consortium) profile is a file that describes
the color characteristics of the LCD monitor. By using an application
that works together with an ICC profile, a high color resolution can be
realized. 

•  Windows98, WindowsMe and Windows2000 all use the ICC profile.

•  When installing Windows98, WindowsMe and Windows2000 set-up

information (described below), the ICC profile is also installed. If you
would like to install the ICC program only, please refer to Installing
the ICC profile.

• When using the ICC profile, please set the [WHITE BALANCE] to

[STD] and the [COLOR MODE] to [OFF].

■

■

■

■

Installing monitor set-up information into Windows95.
This explanation assumes that the floppy disk drive is "A drive".

1.  Place the Utility Disk (provided) into the computer's A drive.

2.  Click on the [Start] button. From [Settings], choose [Control

Panel].

3.  Double click on [Display].

4.  Click on [Settings], [Advanced Properties], and [Monitor], then

[Change]. 

5.  Click on [Have disk], confirm that [Copy manufacturer's files from:]

is [A:] then click [OK].

6.  Confirm that the monitor details are selected, and click [OK].

7.  Check that the monitor details are displayed, then click [Apply].

8.  Click [OK], and close the window.

9.  Remove the Utility Disk from the A drive.

■

■

■

■

Installing monitor set-up information into Windows98, and setting the
monitor's ICC profile as a predetermined value.
This explanation assumes that the floppy disk drive is "A drive".

If the "Add new Hardware Wizard" has appeared:

1.  Place the Utility Disk (provided) into the computer's A drive.

2. Click 

[Next].

3.  Check [Display a list of all the drivers in a specific location, so you

can select the driver you want.], then click [Next].

4.  When [Models] is displayed, click on [Have disk], confirm that

[Copy manufacturer's files from:] is [A:], and click [OK].

5.  Confirm that the monitor details are selected, then click [Next],

[Next], and [Finish]. If the "Add New Hardware Wizard" appears,
repeat the installation commands beginning from 2 above.

6.  Remove the Utility Disk from the A drive.

If the "Add New Hardware Wizard" has not appeared:

1.  Place the Utility Disk in the computer's A drive.

2.  Click on the [Start] button. From [Settings], choose [Control

Panel].

3.  Double click on [Display].

4.  Click on [Settings], [Advanced] and [Monitor].

5.  In [Options], check [Automatically detect Plug & Play monitors]

and click on [Change].

6.  Click [Next].

7.  Click on [Display a list of all the drivers in a specific location, so

you can select the driver you want.], then click [Next].

8.  When [Models] is displayed, click on [Have disk], confirm that

[Copy manufacturer's files from:] is [A:], and click [OK].

9.  Confirm that the monitor details are selected, then click [Next],

[Next], and [Finish].

10.  Check that the monitor details are displayed, then click [Apply].

11.  Click [OK], and close the window.

12.  Remove the Utility Disk from the A drive. 

■ 

■ 

■ 

■ 

Installing monitor set-up information into Windows2000, and setting
the monitor's ICC profile as a predetermined value.
This explanation assumes that the floppy disk drive is "A drive".

1.  Place the Utility Disk (provided) into the computer's A drive.

2.  Click on the [Start] button. From [Settings], choose [Control

Panel].

3.  Double click on [Display].

4.  Click on [Settings], [Advanced] and [Monitor].

5.  Click on [Properties], [Driver] and [Update Driver].

6.  When [Upgrade Device Driver Wizard] appears, click [Next].

7.  Check [Display a list of the known drivers for this device so that I

can choose a specific driver] and click [Next].

8.  When [Models] is displayed, click on [Have disk], confirm that

[Copy manufacturer's files from:] is [A:], and click [OK].

9.  Select the monitor from the list displayed and click [Next].

10. Click [Next], confirm that the monitor's name appears on the

screen, and click [Finish]. If [The Digital Signature Not Found]
appears, click [Yes].

11.  Click on [Close].

12.  Click [OK], and close the window.

13.  Remove the Utility Disk from the A drive.

■

■

■

■

Installing monitor set-up information into WindowsMe, and setting the
monitor's ICC profile as a predetermined value.
This explanation assumes that the floppy disk drive is "A drive".

If the "Add new Hardware Wizard" has appeared:

1.  Place the Utility Disk (provided) into the computer's A drive.

2.  Check [Specify the location of the driver [Advanced]] and click

[Next].

3.  Check [Display a list of all the drivers in a specific location, so you

can select the driver you want.], then click [Next].

4.  When [Models] is displayed, click on [Have disk], confirm that

[Copy manufacturer's files from:] is [A:], and click [OK].

5.  Select the monitor details from the list, then click [Next], [Next],

and [Finish]. If the "Add new Hardware Wizard" appears, repeat
the installation commands beginning from 2 above.

6.  Remove the Utility Disk from the A drive.

If the "Add New Hardware Wizard" has not appeared:

1.  Place the Utility Disk in the computer's A drive.

2.  Click on the [Start] button. From [Settings], choose [Control

Panel].

3.  Double click on [Display].

4.  Click on [Settings], [Advanced] and [Monitor].

LL-T1811W

2 – 5

5.  In [Options], check [Automatically detect Plug & Play monitors]

and click on [Change].

6.  Check [Specify the location of the driver [Advanced]] and click

[Next].

7.  Check [Display a list of all the drivers in a specific location, so you

can select the driver you want.] and click [Next].

8.  When [Models] is displayed, click on [Have disk], confirm that

[Copy manufacturer's files from:] is [A:], and click [OK].

9.  Select the monitor details, then click [Next], [Next], and [Finish].

10. Check that the monitor details are displayed, then click [Apply].

11. Click [OK], and close the window.

12. Remove the Utility Disk from the A drive.

Installing the monitor's ICC profile. (If the set-up information has
already been installed, so too has the profile, and there is no need to
install it.)
This explanation assumes that the floppy disk drive is "A drive".

1.  Place the Utility Disk in the computer's A drive.

2.  Click on the [Start] button. From [Settings], choose [Control

Panel].

3.  Double click on [Display].

4.  Click on [Settings] and [Advanced].

5.  Click on [General] and from [Compatibility] select [Apply the new

display setting without restarting], then click on [Color Manage-
ment].

6.  Click [Add], and select [3 

1

/

2

 Floppy [A:]] as the file location.

7.  Choose the color profile that you would like to install, and click on

[Add].

8.  Choose the profile and click on [Set As Default].

9.  Click [OK], and close the window.

10. Remove the Utility Disk from the A drive.

• When using the ICC profile, please set the [WHITE BALANCE] to

[STD] and the [COLOR MODE] to [OFF].

ColorSync is the Apple Corporation's color management system and
is a function that enables color resolution to be realized when used
with a compatible application. A ColorSync profile describes the color
characteristics of the LCD monitor. 

Notes: • This monitor's ColorSync profile works with MacOS8.5 or

above.

•  When using the ColorSync profile, please set the [WHITE

BALANCE] to [STD] and the [COLOR MODE] to [OFF].

Notes: • A floppy disk drive is necessary. In addition, it is necessary

to have PC Exchange or File Exchange installed in your sys-
tem.

•  Depending on the type of computer or OS, command names

and methods may differ. Please follow the computer's own
operation manual while reading this.

1.  Place the Utility Disk (provided) into the computer's floppy disk drive.

2.  Copy the profile to be used from the Mac folder on the Utility Disk

to the ColorSync profile folder located within the system folder.

3.  Using the ColorSync on the control panel, choose the profile to be

used.

1.  First perform an automatic adjustment.

2.  Perform manual adjustment where necessary. 

The monitor can generally be used without adjustment. If necessary
perform manual adjustment.

Note:  All adjustments will be saved even after turning the power off.

■

■

■

■

The backlight brightness can be adjusted.
Carry out the commands without the On Screen Display (OSD) Menu
displayed. If the OSD Menu is displayed, press the MENU button (sev-
eral times may be required) and begin when the OSD Menu has disap-
peared.

1.  Without the OSD Menu being displayed, push the 

e

 or the 

d

 but-

ton. At the bottom of the screen the BRIGHT bar will appear.

2.  Adjust by pressing the  

e

 button (darker) or  

d

 button (lighter).

The BRIGHT bar automatically disappears approximately 5 seconds
after the last command.

■

■

■

■

The adjustment values of the analogue signal time's ADJUSTMENT
menu can be returned to their original ex-factory values. 

1.  Turn on the monitor power. 

2.  Press the MENU button and the 

e

 button simultaneously. When

[RESET] appears on the screen, the reset is complete.

■

■

■

■

All adjustment values can be returned to their original ex-factory val-
ues in one command.

1.  Turn off the monitor power.

2.  Press the MENU button and the SELECT button simultaneously,

and while doing this press the power button (i.e. turn the monitor
on).
When [ALL RESET] appears on the screen. The reset is complete.

Notes: • While [ALL RESET] is displayed, the control buttons are dis-

abled.

•  It is not possible to reset values when the adjustment lock is

in place. Remove the adjustment lock before attempting to
operate control buttons.

■

■

■

■

By disabling the control buttons (i.e. setting the lock) any attempted
changes to adjusted values will be avoided.

1.  Press the power button to turn off the monitor power.

2.  While pressing the MENU button, press the power button (i.e. turn

the power on).
Continue to press the button until the message appears on the
screen.

[ADJUSTENT LOCKED] will appear on the screen, and the lock
will be set.

[ADJUSTENT UNLOCKED] will appear on the screen, and the
lock will be removed.