DOWNLOAD Sharp LL-T17D4H (serv.man12) Service Manual ↓ Size: 2.11 MB | Pages: 127 in PDF or view online for FREE

1. INPUT button ...........................

LL-T17D4

 To switch between the signal's input terminals.

2. MENU button ........................... This button is used to pop-up, select and close the OSD (On Screen

Display) Menu.

3.

 / MODE button ..................... When the OSD Menu is displayed:

This button is used to select menu options.

When the OSD Menu is not displayed:

This button is used to set DISPLAY MODE.

4.

   buttons ............................. When the OSD Menu is displayed:

These buttons are used to select an option or adjust the value of the
selected option.

When the OSD Menu is not displayed:

These buttons are used to adjust backlight brightness and speaker
volume.

5. Power button ............................ Pressing this button turns the power on.

Press the button again to turn the power off.

6. Power LED ............................... This LED is lit green when in use and orange when in power-saving

mode.

7. Speakers .................................. Audio entering via the external device connected to the monitor can

be heard.

8. Headphone terminal ............... Headphones (commercially available) can be connected here.
9. Main power switch
10. Power terminal
11. DVI-I input terminal ..................

LL-T17D4

 The computer's digital RGB output terminal or analog

RGB output terminal can be connected here.
Separately sold cables are necessary for connection. (p.8)
For a digital signal input: It can be connected to a computer with a
DVI-compatible output terminal (DVI-D24 pin or DVI-I29 pin) and
which has SXGA output ability. Depending on the computer to be
connected, correct display may or may not be possible.

12. Analog RGB input terminal ..... The analog signal cable is connected here. The analog signal cable

included should be used.

13. Audio input terminal ................ A computer's audio output terminal can be connected here. The audio

cable included should be used.

14. Security lock anchor ................ By connecting a security lock (commercially available) to the security

lock anchor, the monitor is fixed so that it cannot be transported.
The security slot works in conjunction with Kensington Micro Saver
Security Systems.

15. Ventilation openings ................ Note: Never block the ventilation openings as this may lead to

overheating inside the monitor and result in malfunction.

LL-T17A4

LL-T17D4

- Pressure from hands on the LCD panel could

cause damage.

-  Do not attempt to move the monitor beyond its

movement range. Applying excessive force to
move the monitor may damage the product.

- Be careful not to allow your fingers to be

pinched.

-

When positioning the display higher, hold the
stand tight so that it does not move together with
the display.

approx. 45°

approx. 20°

Lowest position

Highest position

approx. 47 mm

approx. 20°

approx. 60°

approx. 45°

approx. 5°

- When connecting, ensure that both the monitor

and computer are switched off.

- Be careful not to overly bend the cable or add

extension cords as this could lead to a
malfunction.

- Paying attention to connector direction, firmly

insert the signal cable vertically into the
connector, and then tighten the screws at both
sides.

If connecting to a D-sub15 pin 2 row Apple Power
Macintosh, attach a Macintosh conversion adapter
(commercially available) to the analog signal
cable.

- If connecting to the Sun Ultra series, a

conversion adapter (commercially available) may
be required.

Analog signal cable

Macintosh conversion adapter

The separately sold display cable enables
connection between the DVI-I input terminal on the
monitor and the digital or analog RGB output
terminal of the computer.

- Use a digital signal cable.

(model name: NL-C04J)

- For digital RGB connection, the monitor has an

input for connecting to a computer with a DVI-
compatible output connector (DVI-D24 pin or
DVI-I29 pin) and SXGA output capability.
(Depending on the type of computer to be
connected, the display may not work correctly.)

- Use an analog signal cable.

(model name: NL-C02E)

- Paying attention to connector direction, firmly

insert the signal cable vertically into the
connector, and then tighten the screws at both
sides.

Display cable
(purchased separately)

RGB output terminal

DVI-I input terminal

Analog RGB terminal
(Mini D-sub 15 pin, 3 row)

Headphones (commercially available) can be
connected.

- When the headphones are connected, no sound

can be heard from the monitor speakers.

Set the monitor as follows when establishing a
digital connection with a Power Mac using an ADC-
DVI adapter made by Belkin. (Operation has been
checked with the Power Mac G4 M7627J/A.)
- Perform settings with the Power Mac power

supply off.

1. After connecting the power cord, turn on the

monitor's main power.

2. Press the   button and   button simultaneously,

and while doing this press the power button (i.e.
turn the power on).

MAC DIGITAL

INPUT-2

OFF

ON

3. Set to [ON] with the     buttons.

- Do not set to [ON] if you are not using a Belkin

ADC-DVI adapter, as this may result in
incorrect display.

4. Press the MENU button.

This completes setting.

When the accessory audio cable is connected to
the audio output terminal of the computer, the
sound of the connected computer is output from
the monitor speakers. You can also use the
headphone jack of the display.

AC outlet

Power cord

Power terminal

Audio cable

Audio output terminal

Audio input terminal

Headphones

Headphone terminal