DOWNLOAD Sharp LL-T17D3 (serv.man3) Service Manual ↓ Size: 67.84 KB | Pages: 4 in PDF or view online for FREE

LL-T17D3-H/B

OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION

1 – 1

■ 

■ 

■ 

■ 

• Model name

LL-T17D3-H (Frosty gray)/LL-T17D3-B (Black)

• LCD display

43 cm measured diagonally
TFT LCD module

• Resolution (max.)

SXGA 1280 x 1024 pixels

• Displayable colors (max.)

Approx.16.19 million colors (6bit + FRC)

• Brightness (max.)

250cd/m

2

•  Dot pitch

0.264(H) x 0.264(V) mm

•  Contrast ratio

500 : 1

•  Angle of visibility

Left-right 160°; Up-down 135° (contrast ratio 

s

 5)

•  Screen display size

Horizontal 337.9 mm x Vertical 270.3 mm

• Video signal

Analog: Analog RGB (0.7Vp-p) [75

Ω

]

Digital: DVI standard based on 1.0

• Sync signal

Separate Sync (TTL level: +/-), Sync on Green, Composite Sync (TTL

level: +/-)

• Expansion compensation

Digital scaling (Enlarges VGA/SVGA/XGA etc. to full screen size.)

•  Plug & Play

VESA DDC1/DDC2B compatible

• Power management

VESA: based on DPMS
DVI: based on DMPM

• Speaker output

1W + 1W

• Input signal terminal

Analog: 15 pin mini D-sub (3 rows)

Digital/Analog: 29 pin DVI-I

•  Audio input terminal

Mini stereo jack

• Headphone terminal

Mini stereo jack

• Screen tilt

Upward approx. 0 - 20°; downward approx. 0 - 5°

• Screen swivel

Approx.90° from left through right (Turn table type)

• Power supply

AC100 - 240V, 50/60Hz 

(Use special AC adapter, type NL-A64J of Sharp Corporation.)

•  Temperature of operating environment

5 - 35°C

• Power consumption

40W (With no audio input)

(47W maximum, 3W when in power-saving mode)
(Use special AC adapter.)

• Dimensions

Approx. 398(W) x 188(D) x 376(H) mm

• Weight

Approx. 6.5kg (Excluding AC adapter and analog signal cable.)

■ 

■ 

■ 

■ 

•  Special AC adapter:

•  Analog signal cable: Approx. 1.8m

•  Audio cable: Approx. 1.8m

•  Digital signal cable, NL-C01E (purchased separately): Approx. 2.0m

•  Digital signal cable, NL-C02E (purchased separately): Approx. 2.0m

398

239

376

344

61.5

188

Approx. 1.5 m

Approx. H 147 mm x D 59 mm x H 32 mm

LL-T17D3-H/B

OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION

1 – 2

■ 

■ 

■ 

■ 

•  Recommended resolution is 1280 x 1024.

•  All are compliant only with non-interlaced.

•  Frequencies for Power Macintosh and Sun Ultra series are reference

values. To connect, another adapter (commercially available) may be
required.

•  If the monitor is receiving timing signals that are not compatible, [OUT

OF TIMING] will appear.

Follow your computer's instruction manual to set the timing so that it
is compatible with the monitor.

•   If the monitor is not receiving any signal (synch signal), [NO SIGNAL]

will appear.

■ 

■ 

■ 

■ 

•  Recommended resolution is 1280 x 1024.

•  All are compliant only with non-interlaced.

• A computer with an output terminal conforming to DVI (DVI-D24 pin

or DVI-I29 pin) and with SXGA output capability can be connected
here.

(Depending on the type of computer to be connected, the display may

not work correctly.)

•  If the monitor is receiving timing signals that are not compatible, [OUT

OF TIMING] will appear.

Follow your computer's instruction manual to set the timing so that it

is compatible with the monitor.

•  If the monitor is not receiving any signal (synch signal), [NO SIGNAL]

will appear.

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

Display mode

Hsync

Vsync

Dot 

frequency

VESA

640 x 480

31.5kHz

60Hz

25.175MHz

37.9kHz

72Hz

31.5MHz

37.5kHz

75Hz

31.5MHz

800 x 600

35.1kHz

56Hz

36.0MHz

37.9kHz

60Hz

40.0MHz

48.1kHz

72Hz

50.0MHz

46.9kHz

75Hz

49.5MHz

1024 x 768

48.4kHz

60Hz

65.0MHz

56.5kHz

70Hz

75.0MHz

60.0kHz

75Hz

78.75MHz

1152 x 864

67.5kHz

75Hz

108.0MHz

1280 x 960

60.0kHz

60Hz

108.0MHz

1280 x 1024

64.0kHz

60Hz

108.0MHz

80.0kHz

75Hz

135.0MHz

US text

720 x 400

31.5kHz

70Hz

28.3MHz

Power 
Macintosh 
series

640 x 480

35.0kHz

66.7Hz

30.2MHz

832 x 624

49.7kHz

74.6Hz

57.3MHz

1024 x 768

60.2kHz

75Hz

80.0MHz

1152 x 870

68.7kHz

75Hz

100.0MHz

1280 x 1024

64.0kHz

60Hz

108.0MHz

80.0kHz

75Hz

135.0MHz

Sun 
Ultra series

1024 x 768

48.3kHz

60Hz

64.13MHz

53.6kHz

66Hz

70.4MHz

56.6kHz

70Hz

74.25MHz

1152 x 900

61.8kHz

66Hz

94.88MHz

1280 x 1024

71.7kHz

67.2Hz

117.01MHz

Display mode

Hsync

Vsync

Dot 

frequency

VESA

640 x 480

31.5kHz

60Hz

25.175MHz

37.9kHz

72Hz

31.5MHz

37.5kHz

75Hz

31.5MHz

800 x 600

37.9kHz

60Hz

40.0MHz

48.1kHz

72Hz

50.0MHz

46.9kHz

75Hz

49.5MHz

1024 x 768

48.4kHz

60Hz

65.0MHz

56.5kHz

70Hz

75.0MHz

60.0kHz

75Hz

78.75MHz

1152 x 864

67.5kHz

75Hz

108.0MHz

1280 x 960

60.0kHz

60Hz

108.0MHz

1280 x 1024

64.0kHz

60Hz

108.0MHz

US text

720 x 400

31.5kHz

70Hz

28.3MHz

No.

Function

No.

Function

1

Red video signal input

9

+5V

2

Green video signal input

10

GND

3

Blue video signal input

11

N.C.

4

GND

12

DDC data

5

GND

13

For Hsync signal input

6

For red video signal GND

14

For Vsync signal input

7

For green video signal GND

15

DDC clock

8

For blue video signal GND

No.

Function

No.

Function

1

TMDS data 2-

16

Hot plug detection

2

TMDS data 2+

17

TMDS data 0-

3

TMDS data 2/4 shield

18

TMDS data 0+

4

N.C.

19

TMDS data 0/5 shield

5

N.C.

20

N.C.

6

DDC clock

21

N.C.

7

DDC data

22

TMDS clock shield

8

Analog vertically 
synchronised signal

23

TMDS clock +

9

TMDS data 1-

24

TMDS clock -

10

TMDS data 1+

C1

Analogue red image signal

11

TMDS data 1/3 shield

C2

Analogue green image signal

12

N.C.

C3

Analogue blue image signal

13

N.C.

C4

Analogue horizontally 
synchronised signal

14

+5V

C5

Analogue GND

15

GND

(Mini D-sub connector with 15 pins)

5

1

2

3

4

10

6

7

8

9

15

11

12

13

14

C1 C2

C3 C4

C5

1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16

17 18 19 20 21 22 23 24

(DVI-I connector with 29 pins)

LL-T17D3-H/B

OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION

1 – 3

■ 

■ 

■ 

■ 

*

Specifications and a part of the appearance are subject to change

without notice.

■ 

■ 

■ 

■ 

The monitor is based on VESA DPMS and the DVI DMPM standards.

To activate the monitor's Power Management function, both the video
card and the computer must conform to the VESA DPMS standard and

the DVI DMPM standard.

DPMS: Display Power Manegament Signalling

DMPM: Digital Monitor Power Management

■ 

■ 

■ 

■ 

This monitor supports the VESA DDC (Display Data Channel) standard.

DDC is a signal standard for carrying out Plug & Play functions on the
monitor or PC. It transfers information such as degree of resolution

between the monitor and PC. You can use this function if your PC is

DDC compliant and if it is set so that it can detect the Plug & Play mon-
itor.

There are many varieties of DDC due to the differences between sys-

tems. This monitor works with DDC1 and DDC2B.

Item

MIN

TYP

MAX

Unit

Power supply 
voltage

AC

90

100

110

V

DC

11.4

12.0

12.6

V

Working temperature range

0

—

40

°C

Storing temperature range

-20

—

60

°C

Humidity range

10

—

90

%RH

Visual angle 
range

Vertical 
(CR 

u

 5)

—

135

—

Temperature

Horizontal 
(CR 

u

 5)

—

160

—

Temperature

Contrast ratio 
(CR)

(

θ

 = 0°)

350

500

—

—

Response 
speed

Leading (

τ

r)

—

20

—

ms

Trailing (

τ

d)

Screen white 
chromaticity

(X)

0.275 0.305 0.335

—

(Y)

0.308 0.338 0.368

—

White surface 
luminance

(Y

L

)

—

250

—

cd/m

2

Module model number

Hundai HT17E11-300

DPMS mode

Screen

Power 

consumption

H-sync

V-sync

ON

Display on

47W

Yes

Yes

STANDBY

Display off

3W

No

Yes

SUSPEND

Yes

No

OFF

No

No

DMPM mode

Screen

Power

consumption

ON

Display on

47W

OFF

Display off

3W

1

INPUT button

To switch between the signal's input terminals.

2

MENU button

This button is used to pop-up, select and close
the OSD (On Screen Display) Menu.

3 c

/MODE button When the OSD Menu is displayed:

This button is used to select menu options.

When the OSD Menu is not displayed:

This button is used to set COLOR MODE.

4 e

 

d

 buttons

When the OSD Menu is displayed:

These buttons are used to select an option or
adjust the value of the selected option.

When the OSD Menu is not displayed:

These buttons are used to adjust backlight
brightness and speaker volume.

5

Power button

Pressing this button turns the power on. (After
turning the power on, it may take a little time
before the screen displays.)
Press the button again to turn the power off.

6

Power LED

This LED is lit green when in use and orange
when in power-saving mode.

7

Speakers

Audio entering via the monitor and the external
device connected to the monitor can be heard.

8

Headphone 
terminal

Headphones (commercially available) can be
connected here.

9

Audio input 

terminal

A computer's audio output terminal can be con-
nected here. The audio cable included should be
used.

F

Power terminal

The AC adapter is connected here.

G

DVI-I input 
terminal

The computer's digital RGB output terminal or
analog RGB output terminal can be connected
here.
Separately sold cables are necessary for connec-
tion. 
For a digital signal input: It can be connected to a
computer with a DVI-compatible output terminal
(DVI-D24 pin or DVI-I29 pin) and which has
SXGA output ability. Depending on the computer
to be connected, correct display may or may not
be possible.

H

Analog RGB 
input terminal

The analog signal cable is connected here.The
analog signal cable included should be used.

I

Security lock 
anchor

By connecting a security lock (commercially
available) to the security lock anchor, the monitor
is fixed so that it cannot be transported.
The security slot works in conjunction with Kens-
ington Micro Saver Security Systems.

J

Ventilation 
openings

Note: Never block the ventilation openings as this
may lead to overheating inside the monitor and
result in malfunction.

K

Lock disable 
button

This button is used when folding back the display
section.

6

12

7

8

9 10 11

1

2

3

4

5

13

14

15

LL-T17D3-H/B

OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION

1 – 4

■ 

■ 

■ 

■ 

Caution:

•  Pressure from hands on the LCD panel could cause damage.

•  Be careful not to allow your fingers to be pinched.

•  Be careful not to place any objects on the cables.

Doing so may result in disconnection or other problems.

Press down on the stand and lift up the top section of the monitor.

1.

Remove the AC adapter and the cable.

2.

If carrying out adjustments to the monitor, place it upright.

3.

While pressing the rear lock disable button (1), gently fold back the

monitor (2).

Adjust to an easy to view angle.

• Do not use the monitor when tilted back beyond approximately 20°.

The monitor may fall over leading to injury or malfunction.

(2)

(1)

approx.5

approx.20

approx.45

approx.45

Prohibited range

approx.20

approx.5