DOWNLOAD Sharp LL-T15G4 (serv.man2) Service Manual ↓ Size: 243.07 KB | Pages: 30 in PDF or view online for FREE

MODE SELECT

OSD H-POSITION

OSD V-POSITION
SCALING

3

COLORS

260K

16

M

LANGUAGE

1024x768

DIGITAL

V : 6 0Hz

H : 4 8.4kHz

Notes:
- Depending on the resolution of the input signal,

even if menu options can be selected, the
display may not change.

- To choose a menu option: 

 / MODE button

- To complete adjustment: MENU button

OSD H-POSITION (OSD horizontal position)
The position of the OSD Menu can be moved to

the left and right. (    buttons)

OSD V-POSITION (OSD vertical position)
The position of the OSD Menu can be moved up

and down. (    buttons)

SCALING (Level of scaling)
When the display is enlarged, the sharpness of the

image can be set. (    buttons)
Note:
- When the display mode is set to less than

1024 x 768 pixels, the display is enlarged to
cover the whole screen (i.e. the side ratio of the
display may change).

Maximum display colors can be set. (    buttons)

260K (approx. 260,000)
16M (approx. 16.19 million)

LANGUAGE
You can choose the language used in OSD Menu.

1. Press the   button.

The Language Selection Menu will be displayed
on the screen.

2. Use the 

 / MODE button to choose a language.

3. Press the MENU button.

Language Selection Menu will disappear.

Untitled-40

2003/09/10, 15:41

21

Always remove the plug from the AC outlet when
cleaning the monitor.

Use a soft dry cloth to lightly wipe away any grime
from the cabinet and control panel.
If they are very dirty, apply neutral detergent to a
dampened soft cloth, wring it out well and wipe
away grime.

Use a soft dry cloth to lightly wipe away dirt and
dust from the surface of the LCD panel. (A soft
cloth such as gauze or that used for lens cleaning
is suitable.)

- Never use thinner, benzine, alcohol, glass

cleaner, etc., as this could lead to color change
or change in shape.

- Never scratch the monitor with anything hard or

apply strong pressure as this could leave marks
or result in malfunction.

If the monitor will not be used for a long period of
time, be sure to remove the power plug from the
AC outlet.

- Do not leave the monitor in contact with rubber

or plastic items for long periods of time as this
could lead to color change or change in shape.

If you think the monitor may be faulty, please
check the following points before taking it to be
repaired.
If afterwards it still does not work, please contact
the shop where you purchased the monitor or your
nearest Sharp authorized Service Center.

The monitor's fluorescent tubes have a limited
life span.
- If the screen darkens, persistently flickers or

does not light up, it may be necessary to
replace the fluorescent tube unit. Please
inquire at the shop where you purchased
the monitor or your nearest Sharp
authorized Service Center. (Never attempt
this replacement on your own.)

- In the initial period of use, due to the

characteristics of fluorescent tubes the
screen may flicker. (This is not a
malfunction.)
Should this happen, check by first turning off
the power, then turning it on again.

No image appears on the screen (power LED is
not lit).
- Is the power cord connected properly? (p.12)

No image appears on the screen (power LED is lit).
- Is the computer connected properly? (p.11)
- Is the computer turned on?
- Is the signal's input terminal switched to the

correct one? (p.13)

- Does the computer's signal timing correspond to

monitor specifications? (p.24)

- Is the computer in power-saving mode?

Control buttons do not work.
- Is the adjustment lock on? (p.14)

The image appears distorted.
- Does the computer's signal timing correspond to

monitor specifications? (p.24)

- If you are using the analog signal, perform

automatic screen adjustment. (p.16)

- If you can change the refresh rate on the

computer you are using, change the value to a
lower frequency. (p.24)

No sound can be heard from the speakers.
- Is the audio cable connected correctly? (p.12)
- Are the headphones connected?
- Perform the volume adjustment procedure. (p.15)
- There is no sound from the speakers when the

monitor is in power-saving mode.

When the power is turned off or the monitor
switches to the power-saving mode, the image
remains or an uneven image stays on the
screen.
- Please note that this is not a malfunction but is

with LCD displays. (It will disappear after a few
seconds.)

Untitled-40

2003/09/10, 15:41

22

Model name

LL-T15G4-H (Ivory)/LL-T15G4-B (Black)

LCD display

38 cm measured diagonally
TFT LCD module

Resolution (max.)

XGA 1024 x 768 pixels

Displayable colors (max.)

Approx.16.19 million colors (6 bit + FRC)

Brightness (max.)

260 cd/m

2

Dot pitch

0.297(H) x 0.297(V) mm

Contrast ratio

350:1

Angle of visibility

Left-right 160°; up-down 135°
(contrast ratio 

>

=

 5)

Screen display size

Horizontal 304.1 mm x Vertical 228.1 mm

Video signal

Analog: Analog RGB (0.7 Vp-p) [75

Ω

]

Digital: DVI standard based on 1.0

Sync signal

Separate Sync (TTL level: +/-), Sync on
Green, Composite Sync (TTL level: +/-)

Expansion compensation

Digital scaling (Enlarges VGA/SVGA etc. to full
screen size.)

Plug & Play

VESA DDC1/DDC2B compatible

Power management

VESA: based on DPMS
DVI: based on DMPM

Speaker output

1 W + 1 W

Input signal terminal

Analog: Mini D-sub15 pin (3 row)
Digital: DVI-D24 pin

Audio input terminal

Mini stereo jack

Headphone terminal

Mini stereo jack

Screen tilt

Upward approx. 0 - 25°; downward approx. 0 - 5°

Power supply

AC100 - 240 V, 50/60 Hz

Temperature of operating environment

5 - 35°C

Power consumption

23 W (With no audio input)
(26 W maximum, 2 W when in power-saving
mode)

Dimensions

Approx. 340.5(W) x 194(D) x 336.5(H) mm

Weight

Approx. 3.6 kg (approx. 2.9 kg excluding stand)
(Excluding cables.)

(Units: mm)

340.5

308

336.5

200

194

60

- Analog signal cable: approx. 1.8 m
- Audio cable: approx. 1.8 m
- Digital signal cable, NL-C04J (purchased

separately): approx. 2.0 m

Note:
- As a part of our policy of continuous

improvement, SHARP reserves the right to make
design and specification changes for product
improvement without prior notice. The
performance specification figures indicated are
nominal values of production units. There may
be some deviations from these values in
individual units.

Untitled-40

2003/09/10, 15:41

23

(Mini D-sub connector with 15 pins)

No.

Function

1

Red video signal input

2

Green video signal input

3

Blue video signal input

4

GND

5

GND

6

For red video signal GND

7

For green video signal GND

8

For blue video signal GND

9

+5V

10

GND

11

N.C.

12

DDC data

13

For Hsync signal input

14

For Vsync signal input

15

DDC clock

640x480

800x600

1024x768

720x400
640x480
832x624

1024x768

31.5kHz
37.9kHz
37.5kHz
35.1kHz
37.9kHz
48.1kHz
46.9kHz
48.4kHz
56.5kHz
60.0kHz
31.5kHz
35.0kHz
49.7kHz
60.2kHz

60Hz
72Hz
75Hz
56Hz
60Hz
72Hz
75Hz
60Hz
70Hz
75Hz
70Hz

66.7Hz
74.6Hz

75Hz

25.175MHz

31.5MHz
31.5MHz
36.0MHz
40.0MHz
50.0MHz
49.5MHz
65.0MHz
75.0MHz

78.75MHz

28.3MHz
30.2MHz
57.3MHz
80.0MHz

- Recommended resolution is 1024 x 768.
- All are compliant only with non-interlaced.
- Frequencies for Power Macintosh are reference

values.

- If the monitor is receiving timing signals that are

not compatible, [OUT OF TIMING] will appear.
Follow your computer

'

s instruction manual to set

the timing so that it is compatible with the
monitor.

- If the monitor is not receiving any signal (synch

signal), [NO SIGNAL] will appear.

640x480

800x600

1024x768

720x400

31.5kHz
37.9kHz
37.5kHz
37.9kHz
48.1kHz
46.9kHz
48.4kHz
56.5kHz
60.0kHz
31.5kHz

60Hz
72Hz
75Hz
60Hz
72Hz
75Hz
60Hz
70Hz
75Hz
70Hz

25.175MHz

31.5MHz
31.5MHz
40.0MHz
50.0MHz
49.5MHz
65.0MHz
75.0MHz

78.75MHz

28.3MHz

- Recommended resolution is 1024 x 768.
- All are compliant only with non-interlaced.
- A computer with an output terminal conforming to

DVI (DVI-D24 pin or DVI-I29 pin) and with XGA
output capability can be connected here.
Depending on the type of computer to be
connected, the display may not work correctly.

- If the monitor is receiving timing signals that are

not compatible, [OUT OF TIMING] will appear.
Follow your computer's instruction manual to set
the timing so that it is compatible with the
monitor.

- If the monitor is not receiving any signal (synch

signal), [NO SIGNAL] will appear.

(DVI-D connector with 24 pins)

No.

Function

No.

Function

1

TMDS data 2-

13 N.C.

2

TMDS data 2+

14 +5V

3

TMDS data 2 shield

15 GND

4

N.C.

16 Hot plug detection

5

N.C.

17 TMDS data 0-

6

DDC clock

18 TMDS data 0+

7

DDC  data

19 TMDS data 0 shield

8

N.C.

20 N.C.

9

TMDS data 1-

21 N.C.

10 TMDS data 1+

22 TMDS  clock  shield

11 TMDS data 1 shield

23 TMDS clock +

12 N.C.

24 TMDS clock -

Untitled-40

2003/09/10, 15:41

24