DOWNLOAD Sharp LL-T1511A (serv.man25) Service Manual ↓ Size: 1.23 MB | Pages: 26 in PDF or view online for FREE

Model
LL-T1511A (serv.man25)
Pages
26
Size
1.23 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Monitor
File
ll-t1511a-sm25.pdf
Date

Sharp LL-T1511A (serv.man25) User Manual / Operation Manual ▷ View online

8
Notice for Users in the UK
FOR CUSTOMERS IN U.K.
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code :
GREEN-AND-YELLOW
Earth
BLUE
Neutral
BROWN
Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured
markings identifying the terminals in your plug proceed as follows. The wire which is coloured GREEN-
AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the
safety earth   or coloured green or green-and-yellow.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N
or coloured black.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter
L or coloured red.
Ensure that your equipment is connected correctly-if you are in any doubt consult a qualified
electrician.
   "WARNING :THIS APPARATUS MUST BE EARTHED"
Notice for Users in Australia
Service Inquiries
Please contact your dealer for service if required or contact Sharp Corporation of Australia on
1 300 13 50 22 for referral to your nearest Sharp authorized Service Center.
LL-T1511-01A_gb-notice.p65
2/14/01, 9:00 AM
8
9
English
Under certain display conditions, minute specks
or spots may be noticeable. This is common for
liquid crystal monitors and is not a malfunction.
The LCD panel has been manufactured using
highly elaborate technology. Properly working
pixels comprise 99.99% of total pixels. However,
please understand that 0.01% or less of pixels
may be missing or be brighter than usual.
Do not leave the screen displaying idly for long
periods of time, as this could cause afterimage to
remain.
If the brightness is adjusted to the minimum
setting it may be difficult to see the screen.
The quality of the computer signal may influence
the quality of the display. We recommend using a
computer able to emit high quality video signals.
Never rub or tap the monitor with hard objects.
Please understand that Sharp Corporation bears
no responsibility for errors made during use by
the customer or a third party, nor for any other
malfunctions or damage to this product arising
during use, except where indemnity liability is
recognized under law.
This monitor and its accessories may be
upgraded without advance notice.
Location
Do not use the monitor where ventilation is poor,
where there is a lot of dust, where humidity is
high, or where the monitor may come into contact
with oil or steam, as this could lead to fire.
Ensure that the monitor does not come into
contact with water or other fluids. Ensure that no
objects such as paper clips or pins enter the
monitor as this could lead to fire or electric
shock.
Do not place the monitor on top of unstable
objects or in unsafe places. Do not allow the
monitor to come into contact with strong shocks
or vibrations. Causing the monitor to fall or topple
over may damage it.
Do not use in places where the monitor will be
subject to direct sunlight, near heating equipment
or anywhere else where there is likelihood of high
temperature, as this may lead to generation of
excessive heat and outbreak of fire.
The Power Cord
Do not damage the power cord nor place heavy
objects on it, stretch it or overly bend it. Also, do
not add extension cords. Damage to the cord
may result in fire or electric shock.
Insert the power plug directly into the AC outlet.
Adding an extension cord may lead to fire as a
result of overheating.
Monitor and accessory checklist
Please check that the following items are
included in the package.
LCD monitor (1)
USB cable (1)
Monitor Settings Adjustment Disk for
Windows (1)
Operation manual (1)
Notes:
You are advised to retain the carton in case the
monitor needs to be transported.
Authorship rights to the Monitor Settings
Adjustment Disk’s program are held by Sharp
Corporation. Do not reproduce it without
permission.
Manual Scope
This booklet is the operation manual for both LL-
T1511A and LL-T1501A. Unless specifically
indicated, the explanation refers to both devices,
and the figure shown is LL-T1511A. Where the
instructions differ for each device type, the device
name is indicated.
In this booklet, Microsoft Windows 2000 will be
referred to as [Windows2000], Microsoft
Windows Millenium as [WindowsMe], Microsoft
Windows 98 as [Windows98], Microsoft Windows
95 as [Windows95], and Microsoft Windows
Version 3.1 as [Windows3.1]. When there is no
need to distinguish between programs, the term
[Windows] will be used.
Microsoft and Windows are registered
trademarks of Microsoft Corporation.
Macintosh is a registered trademark of Apple
Computer, Inc.
Tips and safety precautions
LL-T1511-01A_gb.p65
2/14/01, 9:00 AM
9
10
1
2
6
5 4 3
7
LL-T1511A
LL-T1501A
1
2
5 4 3
Product description
Front view
30°
30°
30°
Adjusting the angle of the monitor
Lightly holding both sides of the monitor, adjust
it to a suitable viewing angle.
1. Power button
Pressing this button turns the power on when the main power switch (p. 11) is
on. (After turning the power on, it may take a little time before the screen dis-
plays.) Press the button again to turn the power off.
2. Power LED
This LED is lit green when in use and orange when in power-saving mode.
3.
   buttons
When the On Screen Display (OSD) Menu is displayed:
These buttons are used to increase or decrease the value of a selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness.
4. SELECT button
Selects the menu option to be adjusted.
5. MENU button
This button is used to pop-up, select and close the OSD Menu.
6. BRIGHT button
This button is used to change the backlight to any of three levels of brightness.
On [AUTO] setting the brightness sensor will automatically adjust to the right
brightness.
7. Brightness sensor
Measures the brightness of the surrounding environment.
(LL-T1511A only.)
(LL-T1511A only.)
LL-T1511-01A_gb.p65
2/14/01, 9:00 AM
10
11
English
Rear View
Ventilation
openings
Power connector
The power cord is
connected here.
RGB signal cable
This is to be connected to
the computer's analog RGB
output terminal.
Security lock anchor
By connecting a security lock (purchased sepa-
rately) to the security lock anchor, the monitor is
fixed so that it cannot be transported.
The theft prevention hole works in conjunction with
Kensington Micro Saver Security Systems.
USB port: Upstream (1 Port)
A USB-ready computer or
self-powered USB hub can be
connected here.
Main power switch
(I)
Turns the monitor on.
(O) Turns the monitor off.
USB port: Downstream
(2 ports)
A USB device can be con-
nected here.
Side view
Product description
Note: Never block the
ventilation openings as this
may lead to overheating
inside the monitor and result
in malfunction
LL-T1511-01A_gb.p65
2/14/01, 9:00 AM
11
Page of 26
Display

Click on the first or last page to see other LL-T1511A (serv.man25) service manuals if exist.